Young (3-, 5- and 7-year-old) yemane (Gmelina arborea Roxb.) trees from an industrial tree plantation in Mindanao, Philippines, were studied for their suitability into veneer and plywood production. For each tree, a 4.5-meter log was cut into three 1.5-meter billets for peeling into 0.85-, 2.20- and 2.80-mm veneer thicknesses using a spindleless lathe. Veneer quality was evaluated based on thickness, frequency and depth of lathe checks on the samples. Ten replicates of 3-ply 4.5 mm plywood bonded with phenol formaldehyde were made per age level to determine conformance to standard. Results showed that veneer thickness was higher than the target by 3–22%. Mean frequency of lathe checks ranged from 1 to 10 per 25 mm veneer length, while mean depth ranged from 15 to 60%. The bond strength quality test showed that despite young age, yemane plywood passed the requirement of the PNS ISO 12466-2:2016.
AliponMA, BondadEO, AlcachupasPL, CortiguerraEC.2019. Properties and utilization of young-age yemane (Gmelina arborea roxb.) for lumber production. Philippine J Sci. 148(2):237–248.
2.
AliponMA, BondadEO, GilberoDM, JimenezJJP, DomingoEP, MarasiganO.2021. Anatomical properties and utilization of 3-, 5-, and 7-yr-old falcata [Falcataria moluccana (Miq.) barneby & J. W. Grimes] from Caraga Region, mindanao, Philippines. Philippine J Sci. 150(5):1307–1319.
3.
AzcarateFE, ClarosMP.2020. Twenty years of forest management certification in the tropics: major trends through time and among continents. Forest Policy Econ. 111:102050. doi:10.1016/j.forpol.2019.102050.
CorneliusJ.1994. The effectiveness of plus-tree selection for yield. For Ecol Manag. 67(1-3):23–34. doi:10.1016/0378-1127(94)90004-3.
6.
CortezEV.1979. Wood quality and utilization of yemane (Gmelina arborea). FORPRIDE Digest. 8(1):28–32.
7.
De MiccoV, BalzanoA, WheelerEA, BaasP.2016. Tyloses and gums: a review of structure, function and occurrence of vessel occlusions. IAWA J. 37(2):186–205.
8.
DenaudLE, BléronL, RatleA, MarchalR.2007. Online control of wood peeling process: acoustical and vibratory measurements of lathe checks frequency. Ann For Sci. 64:569–575. doi:10.1051/forest:2007034.
9.
DobnerMJ, NuttoL, HigaAR.2013. Recovery rate and quality of rotary peeled veneer from 30-year-old Pinus taeda L. logs. Ann For Sci. 70:429–437. doi:10.1007/s13595-013-0274-z.
10.
DvorakW.2004. World view of Gmelina arborea: opportunities and challenges. New For. 28:111–126. doi:10.1023/B:NEFO.0000040940.32574.22.
11.
FehrmanJ, McGavinR, LeggateW.2017. Veneer quality control. In: LeggateW, Robert McGavinR, BailleresH, editors. A guide to manufacturing rotary veneer and products from small logs. Canberra: Australian Centre for International Agricultural Research; p. 91–101.
FPRDI. 1989a. Technical information on Mollucan sau [Paraserianthes falcataria (L.) Nielsen].
14.
FPRDI. 1989b. Technical information on Yemane (Gmelina arborea Roxb.).
15.
GuiangES.2001. Impacts and effectiveness of logging bans in natural forests: Philippines. In: DurstPB, WaggenerTR, EntersT, ChengTL, editors. Forests out of bounds: impacts and effectiveness of logging bans in natural forests in Asia-pacific. Thailand: Food and Agricultural Organization of the United Nations Regional Office for Asia and the Pacific Bangkok; p. 103–135.
16.
HseCY, KuoM.1988. Influence of extractives on wood gluing and finishing – a review. Forest Products J. 38(1):52–56.
17.
JimenezJJP, EscobinRP, CondaJM.2015. Profile of wood species used in local and imported plywood and their bond performance. Philippine For Prod J. 6:43–58.
18.
JimenezJJP, RazalRA.2004. Physical and chemical properties of thermally modified Yemane. (Gmelina arborea R. Br.) wood. FPRDI Journal. 30:89–101.
KhooPS, H'ngPS, ChinKL, BakarES, MaminskiM, Raja-AhmadRN, LeeCL, AshikinSN, SaharudinMH.2018. Peeling of small diameter rubber log using spindleless lathe technology: evaluation of veneer properties from outer to inner radial section of log at different veneer thicknesses. European Journal of Wood and Wood Products. 76(4):1335–1346. doi:10.1007/s00107-018-1300-5.
21.
KonnerthJ, KlugeM, SchweizerG, MiljkovicM, Gindl-AltmutterW.2016. Survey of selected adhesive bonding properties of nine European softwood and hardwood species. Eur J Wood Prod. 74:809–819. doi:10.1007/s00107-016-1087-1.
22.
KoranZ, VasishthC.1972. Scanning electron microscopy of plywood glue lines. Wood Fiber Sci. 34(2):202–209.
23.
LeggateW, McGavinRL, BailleresH.2017. A guide to manufacturing rotary veneer and products from small logs. Australian Centre for International Agricultural research. Canberra: ACT. 159 pp.
24.
ListyantoT.2018. Wood quality of Paraserianthes falcataria L. Neilsen Syn. wood from three year rotation of harvesting for construction application. Wood Res. 63(3):497–504.
25.
MangindaanB, MatsushitaY, AokiD, YagamiS, KawamuraF, FukushimaK.2017. Analysis of distribution of wood extractives in Gmelina arborea by gas chromatography and time-of-flight secondary ion mass spectrometry. Holzforschung. 71(4):299–305. doi:10.1515/hf-2016-0129.
26.
McGavinRL, BailleresH, LaneF, BlackburnD, VegaM, OzarskaB.2014. Veneer recovery analysis of plantation eucalypt species using spindleless lathe technology. Bioresources. 9(1):613–627.
27.
MeniadoJA, AmericaWM, De VelaBC, TamolangFN, LoperzFR.1981. Wood identification handbook for Philippine tibers, Vol 2. Quezon City: Apo Production Units, Inc. 186 pp.
28.
PanshinAJ, De ZeeuwC.1970. Textbook of wood technology. Vol. 1. 3rd edition. New York: McGraw Hill Book Co. 705 pp.
29.
PfeiferAR.1982. Factors that contribute to basal sweep in lodgepole pine. Irish Forestry. 39(1):7–16.
PNS ISO 12466-1. 2016. Plywood – bonding quality – part 1: test methods. Bureau of Philippine Standards. Department of Trade and Industry.
32.
PNS ISO 12466-2. 2016. Plywood – bonding quality – part 2: requirements. Bureau of Philippine Standards. Department of Trade and Industry.
33.
RametsteinerE, SimulaM.2003. Forest certification—an instrument to promote sustainable forest management?J Environ Manag. 67(1):87–98.
34.
RohumaaA, HuntCG, HughesM, FrihartCR, LogrenJ.2013. The influence of lathe check depth and orientation on the bond quality of phenolformaldehyde-bonded birch plywood. Holzforschung. 67:779–786.
35.
RojoJP.1999. Revised lexicon of Philippine trees. Laguna: Forest Products Research and Development Institute, College. 484 pp.
36.
SarkerPK, RodrigoR.2014. A review of the status and trends of forest cover in Bangladesh and Philippines. In: KleinnC, FehrmanL, KleinnA., editors. Proceedings of the 4th International DAAD workshop on “The ecological and economic challenges of managing forested landscape in a global context”. Göttingen: Cuvillier Verlag; p. 300.
37.
SicadEN.1987. Rotary veneer cutting of four fast-growing plantation species. FPRDI J. 16(1):86–104.
38.
SulaimanA, LimSC.1989. Some timber characteristics of Gmelina arborea grown in a plantation in peninsular Malaysia. J Trop For Sci. 2(2):135–141.
39.
TenorioC, MoyaR, MuñozF.2011. Comparative study on physical and mechanical properties of laminated veneer lumber and plywood panels made of wood from fast-growing Gmelina arborea trees. J Wood Sci. 57:134–139. doi:10.1007/s10086-010-1149-7.
