Thermal treatments arise as an alternative to increase the physical and biological properties of wood, though they usually cause a reduction in mechanical strength. Therefore, the aim of the study was to determine the brittleness of Eucalyptus wood submitted to freezing and heat treatments. Freezing occurred with green condition specimens and the heat treatment with samples in equilibrium moisture content (20°C and 65% RH). The static bending test was carried out on an EMIC® universal testing machine. The freezing showed slight changes in the mechanical properties of Eucalyptus wood, not differing from natural wood. The treatments with high temperatures caused significant losses in mechanical strength, evidenced by decreases in maximum load and increases in brittleness. In the combined treatments, there was no sum of effects. Therefore, heat treatments modify the mechanical properties of wood, increasing its brittleness and following the tendency that, as the temperature increases, the mechanical resistance decreases.
AndreausJ, FilhoEXF, BonEPS.2008. Biotechnology of holocellulose-degrading enzymes. In: HouCT, ShawJ-F., editor. Biocatalysis and bioenergy. Hoboken (NJ): John Wiley & Sons; p. 197–230.
2.
ASTM. 2000. Standards methods of testing small clear specimens of timber: D143-94. West Conshohocken: Annual Book of ASTM Standard.
3.
ASTM. 2010. Standard practice for sampling forest trees for determination of clear wood properties: D5536 - 94. West Conshohocken: Anual Book of ASTM Standart.
4.
BalBC, Bektaşİ. 2013. The effects of heat treatment on some mechanical properties of juvenile wood and mature wood of Eucalyptus grandis. Drying Technol. 31(4):479–485. doi: 10.1080/07373937.2012.742910
5.
BoonstraMJ, van AckerJ, TjeerdsmaBF, KegelEV.2007. Strength properties of thermally modified softwoods and its relation to polymeric structural wood constituents. Ann For Sci, Springer Verlag/EDP Sciences. 64(7):679–690. doi: 10.1051/forest:2007048
6.
CalonegoF, SeveroE, BallarinA.2012. Physical and mechanical properties of thermally modified wood from E. grandis. European J Wood Wood Prod. 70(4):453–460. doi: 10.1007/s00107-011-0568-5
7.
ConteB, MissioAL, PertuzzattiA, de CademartoriPHG, GattoDA.2014. Physical and colorimetric properties of Pinus elliottii var. elliottii thermally treated wood. Scientia Forestalis. 42(104):545–553.
8.
de CademartoriPHG, Eduardo SchneidE, GattoDA, BeltrameR, StangerlinDM.2012. Modification of static bending strength properties of Eucalyptus grandis heat-treated wood. Mater Res. 15(6):922–927. doi: 10.1590/S1516-14392012005000136
9.
de CademartoriPHG, MissioAL, MattosBD, GattoDA.2015. Effect of thermal treatments on technological properties of wood from two Eucalyptus species. Anais Acad Brasil Ciências. 87(1):471–481. doi: 10.1590/0001-3765201520130121
10.
de MouraLF, BritoJO, da Silva JúniorFG.2012. Effect of thermal treatment on the chemical characteristics of wood from Eucalyptus grandis W. Hill ex Maiden under different atmospheric conditions. CERNE. 18:449–455. doi: 10.1590/S0104-77602012000300012
11.
EMBRAPA. 2013. Sistema brasileiro de classificação de solos. Brasílis - DF. p. 353.
12.
EstevesBM, PereiraHM.2009. Wood modification by heat treatment: A Review. Bioresources. 4(1):370–404.
13.
GiovanellaR, MunizGIBd.2010. Congelamento de madeira – avaliação preliminar de sua utilização. FLORESTA. 40(2):311–318. doi: 10.5380/rf.v40i2.17826
14.
GlossopBR.1994. Effect of hot-water soaking or freezing pre-treatments on drying rates of two eucalypts. Forest Prod J. 44(10):29–32.
15.
HillCAS.2006. Wood modification: chemical, thermal and other processes, 1st.Chichester: John Wiley & Sons. 260 ISBN 0470021721.
16.
HurJY, KangHY.1997. Measurement of longitudinal liquid permeability using pressure bomb method. J Korean Wood Sci Technol. 25(3):66–74.
17.
IlicJ.1995. Advantages of prefreezing for reducing shrinkage-related degrade in eucalypts: general considerações and review of the literature. Wood Sci Technol. 29(4):277–284. doi: 10.1007/BF00202087
KimDY, NishiyamaY, WadaM, KugaS, OkanoT.2001. Thermal decomposition of cellulose crystallites in wood. Holzforschung. 55(5):521–524. doi: 10.1515/HF.2001.084
20.
KorkutS, BudakçiM.2009. Effect of high-temperature treatment on the mechanical properties of rowan (Sorbus aucuparia L.) wood. Drying Technol. 27(11):1240–1247, 2009/10/22. ISSN 0737-3937. Disponível em: http://www.tandfonline.com/doi/abs/10.1080/07373930903267161. Acesso em: 2013/08/26.
21.
LiuH, GaoJ, ChenY.2015. Effects of pre-freezing prior to drying upon some physical and mechanical properties of Eucalyptus urophylla x Eucalyptus grandi wood. Bioresources. 10(4):6417–6427.
22.
MilitzH.2002. Heat treatment technologies in Europe: scientific background and technological State-of-Art. Enhancing the durability of lumber and engineered wood products. Madison: Forest Products Society.
23.
MissioAL, CademartoriPHGd, MattosBD, SantiniEJ, HaseleinCR, GattoDA.2016a. Physical and mechanical properties of fast-growing wood subjected to freeze-heat treatments. Bioresources. 11(4):10378–10390. doi: 10.15376/biores.11.4.10378-10390
24.
MissioAL, MattosBD, de CademartoriPHG, GattoDA.2016b. Effects of two-step freezing-heat treatments on Japanese Raisintree (Hovenia Dulcis Thunb.) wood properties. J Wood Chem Technol. 36(1):16–26. doi: 10.1080/02773813.2015.1039544
25.
MissioAL, MattosBD, de CademartoriPHG, PertuzzattiA, ConteB, GattoDA.2015. Thermochemical and physical properties of two fast-growing eucalypt woods subjected to two-step freeze–heat treatments. Thermochim Acta. 615:15–22. doi: 10.1016/j.tca.2015.07.005
26.
MurataK, WatanabeY, NakanoT.2013. Effect of thermal treatment on fracture properties and adsorption properties of spruce wood. Materials (Basel). 6(9):4186–4197. doi: 10.3390/ma6094186
27.
PertuzzattiA, ConteB, MissioAL, SoaresAK, GumaRL, HaseleinCR, GattoDA.2015. Alterações físicas e superficiais da madeira de canemaçu (Tetrorchidium rubrivenium) termorretificada. Rev Brasil Ciên Agrár. 10(1):140–146.
28.
PertuzzattiA, MissioAL, GattoDA, FariasJA, HaseleinCR.2016. Wood heat treatment in glycerin atmosphere. Pesq Flor Brasil. 36(88):443–449. doi: 10.4336/2016.pfb.36.88.1183
29.
PhuongL, ShidaS, SaitoY.2007. Effects of heat treatment on brittleness of Styrax tonkinensis wood. J Wood Sci. 53(3):181–186. ISSN 1435-0211. Disponível em http://dx.doi.org/10.1007/s10086-006-0841-0.
30.
ShangguanW, GongY, ZhaoR, RenH.2016. Effects of heat treatment on the properties of bamboo scrimber. J Wood Sci. 62(5):383–391. doi: 10.1007/s10086-016-1574-3
31.
SundqvistB, WestermarkU, ErikssonG.2006. Cellulose degradation during hydrothermal treatment of birch wood (Betula pubescens Ehrh.). Cell Chem Technol.40(3–4):217–221.
TaizL, ZeigerE.2006. Fisiologia vegetal, 3. ed. São Paulo: Artmed, traduzida. p. 719.
34.
WeiglM, MullerU, WimmerR, HansmannC.2012. Ammonia vs. thermally modified timber-comparison of physical and mechanical properties. Eur J Wood Wood Prod. 70:233–239. doi: 10.1007/s00107-011-0537-z
35.
WentzelM, BrischkeC, MilitzH.2019. Dynamic and static mechanical properties of Eucalyptus nitens thermally modified in an open and closed reactor system. Mader Cien tecnol. 21(2):141–152.
36.
WentzelM, FleckensteinM, HofmannT, MilitzH.2019. Relation of chemical and mechanical properties of Eucalyptus nitens wood thermally modified in open and closed systems. Wood Mat Sci Eng. 14(3):165–173. doi: 10.1080/17480272.2018.1450783
37.
YildizS, GümuüskayaE.2007. The effects of thermal modification on crystalline structure of cellulose in soft and hardwood. Build Environ. 42:62–67. doi: 10.1016/j.buildenv.2005.07.009
