Fibre direction cylindrical specimens from the sapwood and heartwood areas of Paulownia wood were heat treated at 180, 190, and 200°C split in eight groups of ten specimens each. Air and water permeability were measured, thereafter. Results demonstrated that heat treatment had a positive effect on air permeability both in sapwood and heartwood specimens. That increase might be attributed to the development of cell wall micro-checks caused by thermal degradation and fracture of the vessel tyloses. Liquid permeability was significantly decreased as a result of heat treatment.
AdaR.2013. Cluster analysis and adaptation study for safflower genotypes. Bulg J Agric Sci. 19(1):103–109.
2.
AltuntasE, NarliogluN, AlmaMH.2017. Investigation of the fire, thermal, and mechanical properties of zinc borate and synergic fir retardants on composites produced with PP-MDF wastes. BioResources. 12(4):6971–6983.
3.
ArceN, MoyaR.2015. Wood characterization of adult clones of Tectona grandis growing in Costa Rica. CERNE. 21(3):353–362. doi: 10.1590/01047760201521031751
4.
AyataU, AkcayC, EstevesB.2017. Determination of decay resistance against Pleurotus ostreatus and Coniophora puteana fungus of heat-treated scotch pine, oak and beech wood species. Maderas Ciencia y Tecnologia. 19(3):309–316.
5.
BastaniA, AdamopoulosS, KoddenbergT, MilitzH.2016b. Study of adhesive bondlines in modified wood with fluorescence microscopy and X-ray micro-computed tomography. Int J Adhesion Adhesives. 68:351–358. doi: 10.1016/j.ijadhadh.2016.04.006
6.
BastaniA, AdamopoulosS, MilitzH.2015. Effect of open assembly time and equilibrium moisture content on the penetration of polyurethane adhesive into thermally modified wood. J Adhes. 93(7):575–583. doi: 10.1080/00218464.2015.1118621
7.
BastaniA, AdamopoulosS, MilitzH.2016a. Shear strength of furfurylated, N-methylol melamine and thermally modified wood bonded with three conventional adhesives. Wood Mater Sci Eng. 12(4):236–241. doi: 10.1080/17480272.2016.1164754
8.
BorregaM, KarenlampiPP.2010. Hygroscopicity of heat-treated Norway Spruce (Picea abies) wood. Eur J Wood Prod. 68(2):233–235. doi 10.1007/s00107-0090371-8 doi: 10.1007/s00107-009-0371-8
9.
CandanZ, AkbulutT.2014. Nano-engineered plywood panels: Performance properties. Compos Part B. 64:15–161. doi: 10.1016/j.compositesb.2014.04.021
10.
ChaiyoK, RattanadechoP.2013. Numerical analysis of heat-mass transport and pressure build-up in 1D unsaturated porous medium subjected to a combined microwave and vacuum system. Dry Technol. 31(6):684–697. doi:10.1080/07373937.2012.754461.
11.
Daly-HassenH, KasraouiM, KarraC.2014. Industrial timber production in Tunisia: despite reforestation, dependence on imports is increasing. Bois et Forets Des Tropiques. 324(4):29–37. doi: 10.19182/bft2014.322.a31232
12.
De Almeida AndradeAC, da SilvaJRM, Braga JuniorRA, MoulinJC.2016. Distinction of mechanically processed wood surfaces with similar qualities using sunset laser technique. CERNE. 22(2):159–162. doi: 10.1590/01047760201622022025
13.
De MedeirosFCM, GouveiaFN, BizzoHR, VieiraRF, Del MenezziCHS.2016. Fungicide activity of essential oils from Brazilian Cerrado specie against wood decay fungi. Int Biodeter Biodegrad. 114:87–93. doi: 10.1016/j.ibiod.2016.06.003
14.
DundarT, BuyuksariU, AvciE, AkkilicH.2012. Effect of heat treatment on the physical and mechanical properties of compression and opposite wood of black pine. BioResources. 7(4):5009–5018. doi: 10.15376/biores.7.4.5009-5018
15.
FernandesC, GasparMJ, PiresJ, AlvesA, SimõesR, RodriguesJC, SilvaME, CarvalhoA, BritoJE, LousadaJL.2017. Physical, chemical and mechanical properties of Pinus sylvestris wood at five sites in Portugal. iForest Biogeosciences and Forestry. 10:669–679. doi: 10.3832/ifor2254-010
16.
Fernandez-PuratichH, Oliver-VillanuevaJV.2014. Quantification of biomass and energetic value of young natural regenerated stands of Quercus ilex under Mediterranean conditions. BOSQUE. 35(1):65–74. doi: 10.4067/S0717-92002014000100007
17.
GuoL, XueP, ShaoX.2017. Seed bank and regeneration dynamics of Emmenopterys henryi population on the western side of Wuyi Mountain, South China. J For Res. 28(5):943–952. doi: 10.1007/s11676-017-0376-9
18.
HillC.2006. Wood modification chemical, thermal and other processes. Chichester: John Wiley & Sons, Ltd.
19.
HosseinpourpiaR, AdamopoulosS, HolsteinN, MaiC.2017. Dynamic vapour sorption and water-related properties of thermally modified Scots pine (Pinus sylvestris L.) wood pre-treated with proton acid. Polym Degrad Stab. 138:161–168. doi: 10.1016/j.polymdegradstab.2017.03.009
20.
HosseinpourpiaR, AdamopoulosS, MaiC.2018. Effects of acid pre-treatments on the swelling and vapor sorption of thermally modified Scots pine (Pinus sylvestris L.) wood. BioResources. 13(1):331–345.
21.
LaskowskaA, KozalkiewiczP.2017. Surface wettability of wood species from tropical and temperate zones by polar and dispersive liquids. Drvna Industrija. 68(4):299–306. doi: 10.5552/drind.2017.1704
22.
MahnertKC, AdamopoulosS, KochG, MilitzH.2013. Topochemistry of heat-treated and N-methylol melamine modified wood of Koto (Pterygotamacrocarpa K. Schum.) and Limba (Terminalia superba Engl. et Diels). Holzforschung. 67(2):137–146. doi: 10.1515/hf-2012-0017
23.
MaresiG, Oliveira LongaCM, TurchettiT.2013. Brown rot on nuts of Castanea sativa mill: an emerging disease and its causal agent. iForest. 6:294–301. doi: 10.3832/ifor0952-006
24.
OlteanL, TeischingerA, HansmannC.2007. Influence of temperature on cracking and mechanical properties of wood during wood drying – a review. BioResources. 2(4):789–811.
25.
PolettoM.2017. Polypropylene-based wood-plastic composites: effect of using coupling agent derived from a renewable resource. Maderas, Ciencia y tecnologia. 19(3):265–272.
26.
PooniaPK, HomSK, SihagK, TripathiS.2016. Effect of microwave treatment on longitudinal air permeability and preservative uptake characteristics of chir pine wood. Maderas Ciencia y Tecnologia. 18(1):125–132.
SchmidtO.2006. Wood and tree fungi: biology, damage, protection, and use. Berlin: Springer-Verlag.
29.
ShibataH, HirohashiY.2013. Effect of segment scale in a pore network of porous materials on drying periods. Dry Technol. 31(7):743–751. doi: 10.1080/07373937.2012.752742
30.
SiauJF.1995. Wood: influence of moisture on physical properties. Blacksburg, VA: Department of Wood Science and Forest Products Virginian Polytechnic Institute and State University. 1-63.
SozbirGD, BektasIB.2017. The effect of heat modification and densification on physical properties of poplar wood. Drvna Industrija. 68(4):315–321. doi: 10.5552/drind.2017.1719
33.
SundqvistB, KarlssonO, WestermarkU.2006. Determination of formic-acid and acetic acid concentrations formed during hydrothermal treatment of birch wood and its relation to colour, strength and hardness. Wood Sci Technol. 40(7):549–561. doi: 10.1007/s00226-006-0071-z
34.
TaghiyariHR.2012. Correlation between gas and liquid permeability in some nanosilver-impregnated and untreated hardwood. Journal of Tropical Forest Science. 24(2):249–255.
35.
TaghiyariHR, AvramidisS.2019. Specific gas permeability of normal and nanosilver-impregnated solid wood species as influenced by heat-treatment. Maderas, Ciencia y tecnologia. 21(1):89–96.
36.
TaghiyariHR, HabibzadehS, Miri TariSM.2014. Effects of wood drying schedules on fluid flow in Paulownia wood. Dry Technol. 32(1):89–95. doi: 10.1080/07373937.2013.813855
37.
TaghiyariHR, KarimiAN, ParsapajouhD, PourtahmasiK.2010. Study on the longitudinal gas permeability of juvenile wood and mature wood. Spec Top Rev Porous Media Int J. 1(1):31–38. doi: 10.1615/SpecialTopicsRevPorousMedia.v1.i1.30
38.
TaghiyariHR, Moradi MalekM.2014. Effect of heat treatment on longitudinal gas and liquid permeability of circular and square-shaped native hardwood specimens. Heat Mass Transfer. 50(4):1125–1136. doi: 10.1007/s00231-014-1319-z
39.
TajvidiM, GardnerDJ, BousfieldDW.2016. Cellulose nanomaterials as binders: laminate and particulate systems. J Renew Mater. 4(5):365–376. doi: 10.7569/JRM.2016.634103
40.
TjeerdsmaBF, MilitzH.2005. Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood. Holz als Roh und Werkstoff. 63:102–111. doi: 10.1007/s00107-004-0532-8
41.
USPTO. 2009. Gas permeability measurement apparatus; patent number 8079249 B2.
42.
XuH, TaghiyariHR, ClausonM, MilotaMR, MorrellJJ.2019. Effect of supercritical carbon dioxide treatment on gas permeability of Paulownia fortunei heartwood and sapwood. Wood Fiber Sci. 51(1):1–5. doi: 10.22382/wfs-2019-007
