This study addresses changes in visual appearance of unpainted wood materials exposed outdoors. Specimens of aspen (Populus tremula), Norway spruce (Picea abies), untreated Scots pine (Pinus sylvestris), DMDHEU-modified Scots pine and acetylated Radiata pine (Pinus radiata) were exposed facing south in Ås, Norway for 62 weeks. During this period, mould growth coverage, lightness (L*) and the uniformity of the weather grey colour were assessed. Mould growth coverage was evaluated visually using a rating system. L* and the uniformity were evaluated using image analysis. The increase in mould rating of the wood materials developed in varying speed, but all specimens had reached the maximum rating after 42 weeks. Until then, the changes in L* correlated significantly with the mould rating. However, the specimens continued to darken after they had reached maximum mould rating. DMDHEU was the only material that obtained a more uniform colour as a consequence of the weathering.
BurudI, GobakkenLR, FløA, KvaalK, ThiisTK.2014. Hyperspectral imaging of blue stain fungi on coated and uncoated wooden surfaces. Inter Biodeter Biodegr. 88:37–43. doi: 10.1016/j.ibiod.2013.12.002
3.
EvansPD.2012. Weathering of wood and wood composites. In: RowellRM, editor. Handbook of wood chemistry and wood composites. 2nd ed. Boca Raton, FL: CRC Press, Taylor & Francis Group; p. 151–216.
4.
EvansPD, SchmalzlKJ, MichellAJ.1992. Rapid loss of lignin at wood surfaces during natural weathering. Proceedings IRG Annual Meeting IRG/WP 92-2390; May 10–15; Harrogate (UK).
5.
EvansPD, ThayPD, SchmalzlKJ.1996. Degradation of surfaces during natural weathering. Effects on lignin and cellulose and on the adhesion of acrylic latex primers. Wood Sci Technol. 30(6):411–422. doi: 10.1007/BF00244437
6.
FeistWC, HonDNS.1984. Chemistry of weathering and protection. In: RowellRM, editor. The chemistry of solid wood. Washington (DC): American Chemical Society; p. 401–451.
7.
FojutowskiA, KozirógA, KropaczA, NoskowiakA.2014. The susceptibility of some acetylated hardwood species to mould fungi attack – An attempt to objectify the assessment. Int Biodeter Biodegr. 86:60–65. doi: 10.1016/j.ibiod.2013.08.007
8.
FrühwaldE, LiY, WadsöL.2008. Image analysis study of mould susceptibility of spruce and larch wood dried or heat-treated at different temperatures. Wood Mater Sci Eng. 3(1–2):55–61. doi: 10.1080/17480270802607889
9.
GellerichA, BrischkeC, EmmerichL, Meyer-VeltrupL, KaudewitzP.2017. Evaluation of surface cracks on wood – physical assessment versus subjective sensation. In: Proceedings IRG Annual Meeting IRG/WP 17-20617; June 4-8; Ghent, Belgium.
10.
GobakkenLR, WhistCM, HøibøO, HovdePJ, LarnøyE.2009. Assessment of mould growth on coated wood – methods and application. In: Proceedings IRG Annual Meeting IRG/WP 09-20423; May 24-28; Beijing, China.
11.
HøibøO, NyrudAQ.2010. Consumer perception of wood surfaces: the relationship between stated preferences and visual homogeneity. J Wood Sci. 56(4):276–283. doi: 10.1007/s10086-009-1104-7
KržišnikD, LesarB, ThalerN, HumarM.2018. Influence of natural and artificial weathering on the colour change of different wood and wood-based materials. Forests. 9(8):488. doi: 10.3390/f9080488
14.
LieSK, VestølGI, HøibøO, GobakkenLR.2018. Surface mould growth on wooden claddings – effects of transient wetting, relative humidity, temperature and material properties. Wood Mater Sci Eng. doi:10.1080/17480272.2018.1424239.
15.
LieSK, VestølGI, HøibøO, GobakkenLR. Unpublished. Surface mould growth on wood: A comparison of laboratory screening tests and outdoor performance. Unpublished manuscript.
16.
Meyer-VeltrupL, GobakkenLR.2017. Decay fungi, staining fungi, mould and bacteria. In: JonesD, BrischkeC, editor. Performance of bio-based building materials. Duxford: Woodhead Publishing, Elsevier; p. 416–420.
17.
OberhofnerováE, PánekM, García-CimarrasA.2017. The effect of natural weathering on untreated wood surface. Maderas-Cienc Tecnol. 19(2):173–184.
18.
PfefferA, MaiC, MilitzH.2012. Weathering characteristics of wood treated with water glass, siloxane or DMDHEU. Eur J Wood Prod. 70(1-3):165–176. doi: 10.1007/s00107-011-0520-8
19.
RütherP, JelleBP.2013. Color changes of wood and wood-based materials due to natural and artificial weathering. Wood Mater Sci Eng. 8(1):13–25. doi: 10.1080/17480272.2012.696699
20.
SandakA, BurudI, FløA, ThiisT, GobakkenLR, SandakJ.2017. Hyperspectral imaging of weathered wood samples in transmission mode. Int Wood Prod J. 8(S1):9–13. doi: 10.1080/20426445.2016.1237079
21.
SandakA, SandakJ.2017. Prediction of service life – does aesthetic matter? In: Proceedings IRG Annual Meeting IRG/WP 17-20618; June 4-8; Ghent, Belgium.
22.
SandakA, SandakJ, DimitriouA, BurudI, ThiisT, GobakkenLR, OrmondroydGA, KraniotisD.2017. Assessment and monitoring of aesthetic appearance of building biomaterials during the service life. WIT Trans Ecol Env. 226:527–536. doi: 10.2495/SDP170461
23.
SandakJ, SandakA, RiggioM.2015. Characterization and monitoring of surface weathering on exposed timber structures with a multi-sensor approach. Int J Archit Herit. 9(6):674–688. doi: 10.1080/15583058.2015.1041190
24.
SchnabelT, ZimmerB, PetutschniggAJ.2009. On the modelling of colour changes of wood surfaces. Eur J Wood Prod. 67(2):141–149. doi: 10.1007/s00107-008-0293-x
25.
SchneiderCA, RasbandWS, EliceiriKW.2012. NIH Image to ImageJ: 25 years of image analysis. Nature Meth. 9(7):671–675. doi: 10.1038/nmeth.2089
26.
TerzievN.1997. Fungal discoloration of kiln-and air-dried Scots pine lumber in aboveground testing and its assessment by digital image processing. Forest Prod J. 47(9):43–46.
27.
Van den BulckeJ, Van AckerJ, StevensM.2006. Assessment of blue-stain resistance according to the EN 152 and a reverse test method using visual and computer-aided techniques. Int Biodeter Biodegr. 57(4):229–238. doi: 10.1016/j.ibiod.2006.02.010
28.
XieY, KrauseA, MilitzH, MaiC.2008. Weathering of uncoated and coated wood treated with methylated 1, 3-dimethylol-4, 5-dihydroxyethyleneurea (mDMDHEU). Holz Roh Werkst. 66(6):455–464. doi: 10.1007/s00107-008-0270-4
