Herein we compare seven models of erosion of ductile materials, considering various combinations including cutting and deformation components of wear. The models were fit to three independent sets of experimental results to verify the quality of fitting based upon the coefficient of determination. The results were discussed especially in terms of the friction component, the adjustment of which could lead to better fitting.
ArchardJF.Contact and rubbing of flat surfaces. J Appl Phys. 1953;24(8):981–988.
2.
RabinowiczE, DunnLA, RussellPG.A study of abrasive wear under three-body conditions. Wear. 1961;4(5):345–355.
3.
SundararajanG.The differential effect of the hardness of metallic materials on their erosion and abrasion resistance. Wear. 1993;162:773–781.
4.
FinnieI.Erosion of surfaces by solid particles. Wear. 1960;3:87–103.
5.
FinnieI.Some reflections on the past and future of erosion. Wear. 1995;186:1–10.
6.
BitterJ.A study of erosion phenomena: Part I. Wear. 1963;6(1):5–21.
7.
BitterJ.A study of erosion phenomena: Part II. Wear. 1963;6(3):169–190.
8.
FinnieI.Some observations on the erosion of ductile metals. Wear. 1972;19(1):81–90.
9.
HutchingsIM.A model for the erosion of metals by spherical particles at normal incidence. Wear. 1981;70(3):269–281.
10.
SundararajanG, ShewmonPG.A new model for the erosion of metals at normal incidence. Wear. 1983;84(2):237–258.
11.
da SilvaCRJr, PintaudeG.Uncertainty analysis on the wear coefficient of Archard model. Tribol Int. 2008;41(6):473–481.
12.
da SilvaCR, PintaudeG, Al-QureshiHA, . An application of mean square calculus to sliding wear. J Appl Mech. 2010;77(2):021013.
13.
DoriniFA, PintaudeG, SampaioR.Maximum entropy approach for modeling hardness uncertainties in Rabinowicz's abrasive wear equation. J Tribol. 2014;136(2):021607.
14.
ChenD, SarumiM, Al-HassaniST.Computational mean particle erosion model. Wear. 1998;214(1):64–73.
15.
ASTM G76-18. Standard test method for conducting erosion tests by solid particle impingement using gas jets. West Conshohocken (PA): ASTM International; 2018. www.astm.org.
16.
ASTM G40-17. Standard Terminology Relating to wear and erosion. West Conshohocken (PA): ASTM International; 2017. www.astm.org.
17.
NeilsonJ, GilchristA.Erosion by a stream of solid particles. Wear. 1968;11(2):111–122.
18.
ArabnejadH, MansouriA, ShiraziS, . Development of mechanistic erosion equation for solid particles. Wear. 2015;332:1044–1050.
19.
ShimizuA, YagiY, YoshidaH, . Erosion of gaseous suspension flow duct due to particle collision (i). J Nucl Sci Technol. 1993;30(9):881–889.
20.
WongCY, SolnordalC, SwallowA, . Predicting the material loss around a hole due to sand erosion. Wear. 2012;276:1–15.
21.
Ben-AmiY, UziA, LevyA.Modelling the particles impingement angle to produce maximum erosion. Powder Technol. 2016;301:1032–1043.
