The machinability of newly developed zirconia ceramics for computer numerically controlled milling (CNC) was investigated. The zirconia blanks were prepared by the gelcasting method and tested in the green and two pre-sintered states. All blanks exhibited uniform sintering shrinkage in all directions. The blanks were investigated from the viewpoint of surface milling roughness, quality of milled edges and sharp tips, and machinability of thin structures. The best milling results were obtained for the blanks pre-sintered at 900°C/1 h. Mechanical properties of zirconia blanks, such as biaxial flexural strength, microhardness, indentation elastic modulus, and fracture toughness were determined in the green and pre-sintered states (900 and 1100°C/1 h) and the correlation with the milling results was discussed. The biaxial strength tests of sintered discs showed the advantage of optimised surface milling over conventional polishing.
ZhangY, HanJ-M, ZhengG, Fatigue behaviours of the zirconia dental restorations prepared by two manufacturing methods. Adv Appl Ceram. 2017;116(7):368–375. doi: 10.1080/17436753.2017.1336365
4.
El-WardanyT, BarthR, HolowczakJ, Optimum process parameters to produce green ceramic complex parts. CIRP Ann-Manuf Techn. 2009;58(1):109–112. doi: 10.1016/j.cirp.2009.03.105
BelliR, WendlerM, de LignyD, Chairside CAD/CAM materials. part 1: measurement of elastic constants and microstructural characterization. Dent Mater. 2017;33(1):84–98. doi: 10.1016/j.dental.2016.10.009
7.
ConradHJ, SeongW-J, PesunIJ.Current ceramic materials and systems with clinical recommendations: a systematic review. J Prosthet Dent. 2007;98(5):389–404. doi: 10.1016/S0022-3913(07)60124-3
8.
HaSJ, ShinBC, ChoMW, High speed end-milling characteristics of pre-sintered Al2O 3/Y-TZP ceramic composites for dental applications. J Ceram Soc Jpn. 2010;118(1383):1053–1056. doi: 10.2109/jcersj2.118.1053
9.
MargaridoA, PurquerioBM, FoschiniCR, Influence of the green-machining parameters on the mechanical properties of alumina rods. Int J Adv Manuf Tech. 2017;88(9):3475–3484. doi: 10.1007/s00170-016-9081-7
10.
DemarbaixA, Rivière-LorphèvreE, DucobuF, Behaviour of pre-sintered Y-TZP during machining operations: determination of recommended cutting parameters. J Manuf Process. 2018;32:85–92. doi: 10.1016/j.jmapro.2018.01.020
11.
BukvicG, SanchezLEDA, FortulanCA, Green machining oriented to diminish density gradient for minimization of distortion in advanced ceramics. Mach Sci Technol. 2012;16(2):228–246. doi: 10.1080/10910344.2012.673968
12.
HolthausMG, TwardyS, StolleJ, Micromachining of ceramic surfaces: hydroxyapatite and zirconia. J Mater Process Technol. 2012;212(3):614–624. doi: 10.1016/j.jmatprotec.2011.06.007
13.
KuniiJ, HottaY, TamakiY, Effect of sintering on the marginal and internal fit of CAD/CAM-fabricated zirconia frameworks. Dent Mater J. 2007;26(6):820–826. doi: 10.4012/dmj.26.820
14.
BeuerF, SchweigerJ, EdelhoffD.Digital dentistry: an overview of recent developments for CAD/CAM generated restorations. Br Dent J. 2008;204(9):505–511. doi: 10.1038/sj.bdj.2008.350
15.
CaseED, RenF, KwonP, Machining and ceramic/ceramic Joining to form internal mesoscale channels. Int J Appl Ceram Technol. 2004;1(1):95–103. doi: 10.1111/j.1744-7402.2004.tb00159.x
16.
ShinHW, CaseED, KwonP, Machining and joining to form internal MESO-scale channels in ceramic oxides. 27th Annual Cocoa Beach Conference on Advanced Ceramics and Composites: B: Ceramic Engineering and Science Proceedings. 2003: 573–582.
17.
DenryI, KellyJR.State of the art of zirconia for dental applications. Dent Mater. 2008;24(3):299–307. doi: 10.1016/j.dental.2007.05.007
18.
DadhichP, SrivasPK, MohantyS, Microfabrication of green ceramics: contact vs. non-contact machining. J Eur Ceram Soc. 2015;35(14):3909–3916. doi: 10.1016/j.jeurceramsoc.2015.06.025
19.
NunnSD, KirbyGH.Green machining of gelcast ceramic materials, April 1, 1996; Tennessee. (digital.library.unt.edu/ark:/67531/metadc666726/: accessed May 10, 2017), University of North Texas Libraries, Digital Library, digital.library.unt.edu; crediting UNT Libraries Government Documents Department. (1996).
20.
DesfontainesM, JorandY, GononM, Characterisation of the green machinability of AlN powder compacts. J Eur Ceram Soc. 2005;25(6):781–791. doi: 10.1016/j.jeurceramsoc.2004.03.006
21.
HeR, ZhangR, ZhuX, Improved green strength and green machinability of ZrB2–SiC through gelcasting based on a double gel network. J Am Ceram Soc. 2014;97(8):2401–2404. doi: 10.1111/jace.13076
22.
BukvicG, FiocchiA, SanchezL, Influence of ceramic binders on mechanical properties and finishing of green machined alumina, 22nd International Congress of Mechanical Engineering (COBEM 2013), 2013.
23.
NgSH, HullJB, HenshallJL.Machining of novel alumina/cyanoacrylate green ceramic compacts. J Mater Process Technol. 2006;175(1–3):299–305. doi: 10.1016/j.jmatprotec.2005.04.055
24.
KambojRK, DharaS, BhargavaP.Machining behaviour of green gelcast ceramics. J Eur Ceram Soc. 2003;23(7):1005–1011. doi: 10.1016/S0955-2219(02)00265-0
25.
SuB, DharaS, WangL.Green ceramic machining: a top-down approach for the rapid fabrication of complex-shaped ceramics. J Eur Ceram Soc. 2008;28(11):2109–2115. doi: 10.1016/j.jeurceramsoc.2008.02.023
26.
MohantyS, RameshbabuAP, MandalS, Critical issues in near net shape forming via green machining of ceramics: a case study of alumina dental crown. J Asian Ceram Soc. 2013;1(3):274–281. doi: 10.1016/j.jascer.2013.06.005
27.
DharaS, SuB.Green machining to net shape alumina ceramics prepared using different processing routes. Int J Appl Ceram Technol. 2005;2(3):262–270. doi: 10.1111/j.1744-7402.2005.02021.x
28.
BirkbyI, DransfieldGP, McColganP, Factors affecting the machinability of fine ceramic powder compacts. Br Ceram Trans. 1994;93(5):183–186.
29.
SongJH, EvansJRG.On the machinability of ceramic compacts. J Eur Ceram Soc. 1997;17(14):1665–1673. doi: 10.1016/S0955-2219(97)00041-1
30.
BeraO, TrunecM.Optimization of fine alumina gelcasting using in situ dynamic rheology. J Am Ceram Soc. 2012;95(9):2849–2856. doi: 10.1111/j.1551-2916.2012.05293.x
31.
ISO EN 4287:1997. Geometrical product specifications (GPS) – surface texture: profile method – terms, definitions and surface texture parameters. Geneva: International Organisation for Standardization; 1998.
32.
ISO EN.4288: 1998. Geometric product specifications (GPS) – surface texture: profile method – rules and procedures for the assessment of surface texture. Geneva: International Organisation for Standardization; 1998.
ISO 6507-1:2005. Metallic materials – Vickers hardness test – part 1: test method. Geneva: International Organisation for Standardization; 2005.
35.
DlouhyI, HolzmannM, ManJ, The use of chevron notched specimen for fracture toughness determination, 1994.
36.
BörgerA, SupancicP, DanzerR.The ball on three balls test for strength testing of brittle discs: stress distribution in the disc. J Eur Ceram Soc. 2002;22(9):1425–1436. doi: 10.1016/S0955-2219(01)00458-7
37.
ENV 843-5:1995. Advanced technical ceramics – monolithic ceramics – mechanical tests at room temperature – part 5: statistical analysis. Brussels: CEN; 1996.
38.
LanT-H, WangC-H, ChenK-K, Milling properties of low temperature sintered zirconia blocks for dental use. Mat Sci Eng C. 2017;73:692–699. doi: 10.1016/j.msec.2016.12.089
39.
AlaoA-R, StollR, SongX-F, Surface quality of yttria-stabilized tetragonal zirconia polycrystal in CAD/CAM milling, sintering, polishing and sandblasting processes. J Mech Behav Biomed Mater. 2017;65:102–116. doi: 10.1016/j.jmbbm.2016.08.021
40.
ZhangY, LawnBR, RekowED, Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res B. 2004;71B(2):381–386. doi: 10.1002/jbm.b.30097
41.
ZhangY, LawnBR.Fatigue sensitivity of Y-TZP to microscale sharp-contact flaws. J Biomed Mater Res B. 2005;72B(2):388–392. doi: 10.1002/jbm.b.30174
42.
HjerppeJ, NärhiTO, VallittuPK, Surface roughness and the flexural and bend strength of zirconia after different surface treatments. J Prosthet Dent. 2016;116(4):577–583. doi: 10.1016/j.prosdent.2016.02.018
