Improvement of catalytic activity of oxide electrode by double layer pore structure using nanofiber polyaniline

Abstract

Improving the catalytic activity of La_0.6Sr_0.4Co_0.2Fe_0.8O_3−δ (LSCF) by applying polyaniline nanofiber (PA) as a pore former and the electrochemical property of each pore structure was investigated by structural and morphological analyses. The pore volume and specific surface area of the PA-added LSCF layer increased by about 3.2 and 2.7 times, respectively, relative to the existing LSCF layer. Coarse pores of 2 μm diameter were observed by PA agglomeration. The double-layered LSCF (LSCF_PA1) coated with PA-added LSCF on an LSCF single layer presented the lowest polarisation resistance at all measured temperatures. This was due to increased oxygen reduction reaction by the LSCF + PA layer with high porosity that promoted oxygen gas diffusion. Charge transfer was also improved by the wide contact area between the LSCF layer with lower porosity and the Sm-doped ceria powder electrolyte. Micro-porous LSCF showed about 19% lower polarisation resistance than the nano-porous LSCF at 600°C because of mass transfer through oxygen diffusion.

Keywords

SOFCs double-layered cathode pore structure polarisation resistance

Get full access to this article

View all access options for this article.

References

Richter

, Holtappels

, Graule

, Materials design for perovskite SOFC cathodes. Monatshefte für Chemie-Chemical Monthly. 2009;140(9):985–999. doi: 10.1007/s00706-009-0153-3

Hardin

WG.

, Slanac

DA.

, Wang

, Highly active, nonprecious metal perovskite electrocatalysts for bifunctional metal–air battery electrodes. J Phys Chem Lett. 2013;4(8):1254–1259. doi: 10.1021/jz400595z

Noh

, Ryu

, Kim

, Structural and impedance analysis of copper doped LSM cathode for IT-SOFCs. J Alloys Compd. 2013;557:196–201. doi: 10.1016/j.jallcom.2013.01.002

Tai

L-W.

Structure and electrical properties of La_1−xSr_xCo_1−yFe_yO₃. Part 1. The system La_0.8Sr_0.2Co_1−yFe_yO₃. Solid State Ionics. 1995;76(3-4):259–271. doi: 10.1016/0167-2738(94)00244-M

Kuhn

, Hashimoto

, Sato

, Thermo-chemical lattice expansion in La_0.6Sr_0.4Co_1−yFe_yO_3−δ. Solid State Ionics. 2013;241:12–16. doi: 10.1016/j.ssi.2013.03.023

Liu

, Chen

, Zhao

, Performance stability and degradation mechanism of La_0.6Sr_0.4Co_0.2Fe _0.8O_3−δ cathodes under solid oxide fuel cells operation conditions. Int J Hydrogen Energy. 2014;39(28):15868–15876. doi: 10.1016/j.ijhydene.2014.03.077

Sun

, Hui

, Roller

Cathode materials for solid oxide fuel cells: a review. J Solid State Electrochem. 2010;14(7):1125–1144. doi: 10.1007/s10008-009-0932-0

Wei

, Lü

, Huang

, Synthesis, electrical and electrochemical properties of Ba 0.5 Sr 0.5 Zn 0.2 Fe 0.8 O 3− δ perovskite oxide for IT-SOFC cathode. J Power Sources. 2008;176(1):1–8. doi: 10.1016/j.jpowsour.2007.09.120

Xia

Sm 0.5 Sr 0.5 CoO 3 cathodes for low-temperature SOFCs. Solid State Ionics. 2002;149(1):11–19. doi: 10.1016/S0167-2738(02)00131-5

10.

Lee

, Lim

, Lee

, Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3− δ (BSCF) and La 0.6 Ba 0.4 Co 0.2 Fe 0.8 O 3− δ (LBCF) cathodes prepared by combined citrate-EDTA method for IT-SOFCs. J Power Sources. 2006;157(2):848–854. doi: 10.1016/j.jpowsour.2005.12.028

11.

Nie

, Liu

, Zhang

, Effects of pore formers on microstructure and performance of cathode membranes for solid oxide fuel cells. J Power Sources. 2011;196(23):9975–9979. doi: 10.1016/j.jpowsour.2011.08.036

12.

Kang

H-K

, Taylor

PR.

Direct production of porous cathode material (La (1-x) SrxMnO3) using a reactive DC thermal plasma spray system. J Therm Spray Technol. 2001;10(3):526–531. doi: 10.1361/105996301770349312

13.

Kenney

, Karan

Engineering of microstructure and design of a planar porous composite SOFC cathode: A numerical analysis. Solid State Ionics. 2007;178(3):297–306. doi: 10.1016/j.ssi.2006.12.009

14.

Marinha

, Hayd

, Dessemond

, Performance of (La, Sr)(Co, Fe) O 3− x double-layer cathode films for intermediate temperature solid oxide fuel cell. J Power Sources. 2011;196(11):5084–5090. doi: 10.1016/j.jpowsour.2011.01.063

15.

Grunbaum

, Dessemond

, Fouletier

, Rate limiting steps of the porous La 0.6 Sr 0.4 Co 0.8 Fe 0.2 O 3− δ electrode material. Solid State Ionics. 2009;180(28):1448–1452. doi: 10.1016/j.ssi.2009.09.005

16.

Park

, Im

, Choi

, Enhanced performance of the Sm 0.5 Sr 0.5 CoO 3− δ double layer porous cathode for solid oxide fuel cells. Solid State Ionics. 2011;184(1):35–38. doi: 10.1016/j.ssi.2010.09.017

17.

Robertson

, Holzer

, Prestat

, 2010. Effects of particle and pore sizes, surface area and porosity on the performance of LSC cathodes. Proceedings of 9th European fuel cell forum.