In order to improve the oxidation resistance of C/C composites, a ZrB2–SiC/SiC oxidation protective dual-layer coating was prepared by a pack cementation combined with the slurry paste method. The phase and microstructure of the coating were characterised by X-ray diffraction, scanning electron microscope and energy-dispersive spectrometer analyses. The anti-oxidation and thermal shock resistance of the coating were also investigated. It was found that the ZrB2–SiC/SiC coating could effectively improve the oxidation resistance of the C/C composites. The weight loss of the coated samples was only 1.8% after oxidation at 1773 K for 18 h in air. The coating endured 20 thermal shock cycles between 1773 K and room temperature with only 4.6% weight loss.
CairoCAA, FlorianM, GraçaMLA, Kinetic study by TGA of the effect of oxidation inhibitors for carbon–carbon composite. Mater Sci Eng A. 2003;358:298–303. doi: 10.1016/S0921-5093(03)00302-2
2.
WestwoodME, WebsterJD, DayRF, Oxidation protection for carbon fiber composites. J Mater Sci. 1996;31:1389–1397. doi: 10.1007/BF00357844
3.
ChuYH, LiHJ, FuQG, Oxidation protection of C/C composites with a multilayer coating of SiC and Si+SiC+SiC nanowires. Carbon. 2012;50:1280–1288. doi: 10.1016/j.carbon.2011.10.048
4.
FengT, LiHJ, FuQG, Microstructure and anti–oxidation properties of multi–composition ceramic coatings for carbon/carbon composites. Ceram Int. 2011;37:79–84. doi: 10.1016/j.ceramint.2010.08.027
5.
HuangJF, ZengXR, LiHJ, Influence of the preparation temperature on the phase, microstructure and anti–oxidation property of a SiC coating for C/C composites. Carbon. 2004;42:1517–1521. doi: 10.1016/j.carbon.2004.01.066
6.
YaoXY, LiHJ, ZhangYL, A SiC–Si–ZrB2 multiphase oxidation protective ceramic coating for SiC–coated carbon/carbon composites. Ceram Int. 2012;38:2095–2100. doi: 10.1016/j.ceramint.2011.10.047
7.
HuangJF, WangB, LiHJ, A MoSi2/SiC oxidation protective coating for carbon/carbon composites. Corros Sci. 2011;53:834–839. doi: 10.1016/j.corsci.2010.11.024
8.
HeRJ, ZhangRB, PeiYM, Two-step hot pressing of bimodal micron/nano ZrB2 ceramic with improved mechanical properties and thermal shock resistance. Int J Refract Met Hard Mater. 2014;H46:65–70. doi: 10.1016/j.ijrmhm.2014.05.016
9.
ZouX, FuQG, LiuL, Zrb2–SiC coating to protect carbon/carbon composites against ablation. Surf Coat Technol. 2013;226:17–21. doi: 10.1016/j.surfcoat.2013.03.027
10.
RezaieA, FahrenholtzWG, HilmasGE.Evolution of structure during the oxidation of zirconium diboride–silicon carbide in air up to 1500°C. J Eur Ceram Soc. 2007;27(6):2495–2501. doi: 10.1016/j.jeurceramsoc.2006.10.012
11.
SunX, WangZ, HuP.Formation mechanism of micro–arc oxidation coatings formed on ZrB2–SiC ceramics. Mater Chem Phys. 2010;120:417–420. doi: 10.1016/j.matchemphys.2009.11.028
12.
Schulte-FischedickJ, SchmidtJ, TammeR, Oxidation behaviour of C/C–SiC coated with SiC–B4C–SiC–cordierite oxidation protection system. Mater Sci Eng A. 2004;386:428–434. doi: 10.1016/j.msea.2004.07.055
13.
LiuYS, ChengLF, ZhangLT, Oxidation protection of multilayer CVD SiC/B/SiC coatings for 3D C/SiC composite. Mater Sci Eng A. 2007;466:172–177. doi: 10.1016/j.msea.2007.02.059
14.
FahrenholtzWG, HilmasGE, TalmyIG. Refractory diborides of zirconium and hafnium. J Am Ceram Soc. 2007;90:1347–1364. doi: 10.1111/j.1551-2916.2007.01583.x
15.
KimJI, KimJW, ChoiDJ, Design of a C/SiC functionally graded coating for the oxidation protection of C/C composites. Carbon. 2005;43:1749–1757. doi: 10.1016/j.carbon.2005.02.025
16.
WangXY, GengHB, HeSY, Effect of thermal expansion coefficient on the stress distribution in solar panel. Int J Adhes. 2007;27:288–297. doi: 10.1016/j.ijadhadh.2006.01.011
17.
ChuYH, FuQG, LiHJ, Influence of SiC nanowires on the properties of SiC coating for C/C composites between room temperature and 1500°C. Corros Sci. 2011;53:3048–3053. doi: 10.1016/j.corsci.2011.05.046
