ZrB2–SiC doped with W was prepared from a mixture of Zr, Si, B4C and W via reactive hot pressing. The fully dense ZrB2–SiC–WB–ZrC ceramic was obtained at 1900°C for 60 min under 30 MPa in an argon atmosphere. Reaction path and solid solution characteristics of the starting powders were studied through a series of pressureless heat treatment at temperatures between 700 and 1500°C. The solid solution phases of (Zr, W)B2, (W, Zr)B and (Zr, W)C were formed directly by reactions between the precursors. Homogeneous distribution of solute atoms in solution and the solid solubilities were also studied.
ZhangGJ, DengZY, KondoN, Reactive hot pressing of ZrB2-SiC composites. J Am Ceram Soc.2000;83(9):2330–2332. doi: 10.1111/j.1151-2916.2000.tb01558.x
2.
ZhangGJ, AndoM, YangJF, Boron carbide and nitride as reactants for in situ synthesis of boride-containing ceramic composites. J Eur Ceram Soc.2004;24(2):171–178. doi: 10.1016/S0955-2219(03)00607-1
3.
ZimmermannJW, HilmasGE, FahrenholtzWG, Fabrication and properties of reactively hot pressed ZrB2-SiC ceramics. J Eur Ceram Soc.2007;27(7):2729–2736. doi: 10.1016/j.jeurceramsoc.2006.11.074
4.
SonberJK, SuriAK. Synthesis and consolidation of zirconium diboride: review. Adv Appl Ceram.2011;110(6):321–334. doi: 10.1179/1743676111Y.0000000008
5.
QuQ, HanJC, HanWB, In situ synthesis mechanism and characterization of ZrB2-ZrC-SiC ultra high-temperature ceramics. Mater Chem Phys.2008;110(2–3):216–221. doi: 10.1016/j.matchemphys.2008.01.041
6.
KhanraAK, GodkhindiMM. Effect of Ni additives on pressureless sintering of SHS ZrB2. Adv Appl Ceram.2005;104(6):273–276. doi: 10.1179/174367606X69898
7.
ChamberlainAL, FahrenholtzWG, HilmasGE. Low-temperature densification of zirconium diboride ceramics by reactive hot pressing. J Am Ceram Soc.2006;89(12):3638–3645. doi: 10.1111/j.1551-2916.2006.01299.x
8.
WuWW, ZhangGJ, KanYM, Reactive hot pressing of ZrB2-SiC-ZrC ultra high-temperature ceramics at 1800°C. J Am Ceram Soc.2006;89(9):2967–2969.
9.
WuWW, ZhangGJ, KanYM, Synthesis and microstructural features of ZrB2-SiC-based composites by reactive spark plasma sintering and reactive hot pressing. Scr Mater.2007;57(4):317–320. doi: 10.1016/j.scriptamat.2007.04.025
10.
LiuHT, WuWW, ZouJ, In situ synthesis of ZrB2-MoSi2 platelet composites: Reactive hot pressing process, microstructure and mechanical properties. Ceram Int.2012;38(6):4751–4760. doi: 10.1016/j.ceramint.2012.02.061
11.
ZhangGJ, JinZZ, YurXM. A multilevel ceramic composite of TiB2-Ti0.9W0.1C-SiC prepared by in situ reactive hot pressing. Mater Lett.1996;28(1-3):1–5. doi: 10.1016/0167-577X(96)00031-6
12.
ZhuJF, HanN. Synthesis and Mechanical Properties of (Ti,V)2AlC/Al2O3 In Situ Solid Solution Composites by Reactive Hot Pressing. J Am Ceram Soc.2012;95(10):3285–3290. doi: 10.1111/j.1551-2916.2012.05393.x
13.
ZhangHB, ZhangGJ, XueJX, Preparation, texturing and mechanical properties of ZrB2-WSi2 ceramics via reactive hot pressing and hot forging. Adv Appl Ceram.2014;113(7):389–393. doi: 10.1179/1743676114Y.0000000174
SonberJ, MurthyTC, SubramanianC, Effect of WSi2 addition on densification and properties of ZrB2. Adv Appl Ceram.2014;113(2):114–119. doi: 10.1179/1743676113Y.0000000125
16.
ZouJ, ZhangGJ, KanYM. Formation of tough interlocking microstructure in ZrB2-SiC-based ultrahigh-temperature ceramics by pressureless sintering. J Mater Res.2009;24(7):2428–2434. doi: 10.1557/jmr.2009.0274
17.
ZouJ, SunSK, ZhangGJ, Chemical Reactions, Anisotropic Grain Growth and Sintering Mechanisms of Self-Reinforced ZrB2-SiC Doped with WC. J Am Ceram Soc.2011;94(5):1575–1583. doi: 10.1111/j.1551-2916.2010.04278.x
18.
ZouJ, ZhangGJ, HuCF, Strong ZrB2-SiC-WC Ceramics at 1600 °C. J Am Ceram Soc.2012;95(3):874–878.
19.
OrlovskayaN, StadelmannR, LugovyM, Mechanical properties of ZrB2-SiC ceramic composites: room temperature instantaneous behaviour. Adv Appl Ceram.2013;112(1):9–16. doi: 10.1179/1743676112Y.0000000042
20.
ScitiD, SilvestroniL, MedriV, Sintering and densification mechanisms of ultra-high temperature ceramics. In: Fahrenholtz WG, Wuchina EJ, Lee WE, et al., editors. Ultrahigh temperature ceramics. Hoboken, (NJ): John Wiley & Sons, Inc.; 2014. p. 112–143.
21.
HuDL, ZhengQ, GuH, Role of WC additive on reaction, solid-solution and densification in HfB2-SiC ceramics. J Eur Ceram Soc.2014;34(3):611–619. doi: 10.1016/j.jeurceramsoc.2013.10.007
