Abstract
The hot deformation behaviour of a particulate reinforced metal matrix composite, manufactured via a casting route and consisting of a 2000 series matrix reinforced with 20 vol.-%Al2O3 particles, was investigated over a range of temperatures and strain rates. The behaviour was compared with the unreinforced alloy deformed under the same conditions. Both materials exhibited similar hot working behaviour. However, under all deformation conditions the composite exhibited flow stresses higher than that of the alloy, but as the deformation temperature increased and the strain rate decreased, this difference became negligible. The activation energy for deformation was determined using constitutive equations. The value determined for the composite was slightly higher than that for the alloy. This suggested that the ceramic particles in the composite force the matrix to undergo additional strain hardening during deformation. Dynamic recovery was the sole restoration process in both materials. No evidence of dynamic recrystallisation was found.
Get full access to this article
View all access options for this article.