Influence of Ti on the oxidation behaviour at 1250°C of chromia-forming alloys based on nickel and/or cobalt

Abstract

ABSTRACT

Six {Ni,Co}-based alloys containing 25wt-%Cr, 0.4wt-%C and 1.6wt-%Ti were cast and subjected to metallographic characterisation before and after exposure for 70 h in air at 1250°C, the highest temperature at which these alloys may be used under low applied stresses. The alloys based mainly on nickel contain principally chromium carbides while TiC is the principal carbide phase in the alloys mainly based on cobalt. The oxidation resistance is the best for the alloys richer in nickel than in cobalt, but titanium has the same effect for all alloys, whatever the base element: after oxidation it is present as an external TiO₂ layer covering chromia. The presence of this outermost more (Ni-based alloys) or less thick (Co-based alloys) TiO₂ scale on the outer face of the external chromia scale, is expected to have a protective role against chromia volatilisation, phenomenon which can be very important at so high temperature.