The sulfidation kinetics of titanium and Ti-6Al-4V (Ti64) using elemental sulfur were studied by measuring the amount of metal consumed instead of the change in mass or scale thickness. This metal consumption approach combines the parabolic oxidation law, Arrhenius equation, and Pilling-Bedworth ratio to determine the apparent activation energy and the pre-exponential factor of consumption of Ti64 during sulfidation. The estimations of apparent activation energy and pre-exponential factor were 110.4 kJ·mol−1 and 1.3 × 10−9 m2s−1 for the titanium-sulfur, and 116.2 kJ·mol−1 and 1.2 × 10−9 m2s−1 for the Ti64-sulfur system. Finally, a material removal predictor was developed to predict the amount of Ti64 consumed for a given sulfidation temperature and time.
MedvedovskiEMendozaGLRzadE. Influence of multi-layered thermal diffusion coatings on high-temperature sulfidation resistance of steels. Surf Coat Technol. 2020; 403: 126430, doi: 10.1016/j.surfcoat.2020.126430
2.
GesmundoFYoungDJRoySK.The high temperature corrosion of metals in sulfidizing-oxidizing environments: a critical review. High Temp Mater Proc. 1989; 8: 149–190. doi: 10.1515/HTMP.1989.8.3.149
3.
LefkyCSZuckerBWrightD. Dissolvable supports in powder bed fusion-printed stainless steel. 3D Print Addit Manuf. 2017; 4: 3–11. doi: 10.1089/3dp.2016.0043
4.
YazdanparastSRaikarSHeiligM. Iodine-based sensitization of copper alloys to enable self-terminating etching for support removal and surface improvements of additively manufactured components. 3D Print Addit Manufact. 2022. doi: 10.1089/3dp.2021.0242
5.
RaikarSHeiligMMamidannaA. Self-terminating etching process for automated support removal and surface finishing of additively manufactured Ti-6Al-4 V. Addit Manuf. 2021; 37: 101694, doi: 10.1016/j.addma.2020.101694
6.
RaikarSDiGregorioSAgnaniM. Improving fatigue performance of additively manufactured Ti-6Al-4V using sulfur-based self-terminating etching processes. Addit Manuf. 2023; 61: 103331, doi: 10.1016/j.addma.2022.103331
7.
IzumiTYoshiokaTHayashiS. Oxidation behavior of sulfidation processed TiAl–2 at.% X (X = V, Fe, Co, Cu, Nb, Mo, Ag and W) alloys at 1173 K in air. Intermetallics. 2001; 9: 547–558. doi: 10.1016/s0966-9795(01)00023-1
8.
IzumiTYoshiokaTHayashiS. Sulfidation properties of TiAl–2 at.% X (X = V, Fe, Co, Cu, Nb, Mo. sulfidation properties of TiAl–2 at.% X (X = V, Fe, Co, Cu, Nb, Mo, Ag and W) alloys at 1173 K and 1.3 Pa sulfur pressure in an H2S–H2 gas mixture. Intermetallics. 2000; 8: 891–901. doi: 10.1016/S0966-9795(00)00028-5
9.
DuHLDattaPKLewisDB. High-temperature corrosion of Ti and Ti-6Al-4V alloy. Oxid Met. 1996; 45: 507–527. doi: 10.1007/bf01046849
10.
FalkFSobolOStephan-ScherbC.The impact of the microstructure of Fe-16Cr-0.2C on high-temperature oxidation – sulphidation in SO2. Corros Sci. 2021; 190: 109618, doi: 10.1016/j.corsci.2021.109618
11.
GuoXHRenYJShenJ. The corrosion behavior of Co-Cr-Al alloys exposed to mixed oxygen-sulfur atmospheres at 900 °C. Corros Sci. 2021; 188: 109530, doi: 10.1016/j.corsci.2021.109530
12.
BirksNMeierGHPettitFS.Introduction to the high temperature oxidation of metals. Cambridge: Cambridge University Press; 2006.
13.
RusieckiSWójtowiczAMrowecS. New thermobalance for studying the kinetics of high temperature reactions in sulphur atmospheres. Solid State Ion. 1986; 21: 273–277. doi: 10.1016/0167-2738(86)90189-X
14.
MrowecS.A. calculations of parabolic rate constants for metal oxidation. Oxid Met. 1974; 8: 379–391. doi: 10.1007/BF00603388
15.
RomanskiJ.Geometrical factors in studies of the kinetics of oxidation of metals at high temperatures. Parts 1 and 2. Parts 8 and 2. Corros Sci. 1968; 8: 67–87. doi: 10.1016/s0010-938x(68)80074-5
16.
NaumenkoDGleesonBWesselE. Correlation between the microstructure, growth mechanism, and growth kinetics of alumina scales on a FeCrAlY alloy. and growth kinetics of alumina scales on a FeCrAlY alloy. Metall Mater Trans. 2007; 38: 2974–2983. doi: 10.1007/s11661-007-9342-z
17.
O'HareR.Materials kinetics fundamentals. Hoboken, New Jersey: John Wiley & Sons; 2014.
18.
CramerSD; CovinoBS, editors. Corrosion: fundamentals, testing, and protection; Ohio: ASM International ; 2003; p. 115–116.
19.
OhtaKFuekiKMukaiboT.Sulfurization of titanium in sulfur vapor. Denki Kagaku Oyobi Kogyo Butsuri Kagaku. 1973; 41: 697–701. doi: 10.5796/kogyobutsurikagaku.41.697
20.
DutrizacJE.The reaction of titanium with sulphur vapour. J Less Common Met. 1977; 51: 283–303. doi: 10.1016/0022-5088(77)90090-X
