The wire beam electrode (WBE) of laser additive manufacturing (LAM) nickel-based alloy was prepared to help study its crevice behaviour and mechanism at different area in the crevice with different size. The results show that the LAM nickel-based alloy with the crevice size of 0.1 and 0.3 mm presents crevice corrosion characteristics at 1 day and 3 days due to the formation of oxygen-concentration cell at the former two cases caused by the difficult migration of oxygen from the outside into the crevice. The corrosion at the middle and inside of the crevice is more serious than the outside, which is reflected by the 29.92% lower contents of O2− at the inside than that at the outside of the crevice. Locally, inter-phase corrosion appears between the uniform nickel-based alloy matrix and the insoluble oxides at the inside of the crevice.
CrookP.Corrosion characteristics of the wrought Ni-Cr-Mo alloys. Mater Corros. 2015; 56: 606–610. doi: 10.1002/maco.200403848
2.
RebakRBCrookP.Influence of the environment on the general corrosion rate of alloy 22 (N06022).Transportation, Storage, and Disposal of Radioactive Materials.2004.
3.
FirouzdorVSridharanKCaoG. Corrosion of a stainless steel and nickel-based alloys in high temperature supercritical carbon dioxide environment. Corros Sci. 2013; 69: 281–291. doi: 10.1016/j.corsci.2012.11.041
4.
RodriguezMACarranzaRMRebakRB.Influence of halide ions and alloy microstructure on the passive and localized corrosion behavior of alloy 22. New York: Springer; 2005. p. 1179–1185.
5.
RybalkaKVBeketaevaLADavydovAD.Effect of self-passivation on the electrochemical and corrosion behaviour of alloy C-22 in NaCl solutions. Corros Sci. 2012; 54: 161–166. doi: 10.1016/j.corsci.2011.09.009
6.
MilewskiJO.Additive manufacturing metal, the art of the possible. Additive manufacturing of metals. 2017; 258: 7–33.
7.
DebRoyTWeiHLZubackJS. Additive manufacturing of metallic components–process, structure and properties. Prog Mater Sci. 2018; 92: 112–224. doi: 10.1016/j.pmatsci.2017.10.001
8.
DindaGPDasguptaAKMazumderJ.Laser aided direct metal deposition of Inconel 625 superalloy: microstructural evolution and thermal stability. Mater Sci Eng A. 2009; 509: 98–104. doi: 10.1016/j.msea.2009.01.009
9.
ZhengCLiuZChenS. Corrosion behavior of a Ni–Cr–Mo alloy coating fabricated by laser cladding in a simulated sulfuric acid dew point corrosion environment. Coatings. 2020; 10: 849. doi: 10.3390/coatings10090849
10.
ZhengCLiuZLiuQ. Comparative investigation on corrosion behavior of laser cladding C22 coating, Hastelloy C22 alloy and Ti–6Al–4V alloy in simulated desulfurized flue gas condensates. J Mater Res Technol. 2022; 18: 2194–2207. doi: 10.1016/j.jmrt.2022.03.118
11.
UhligHHRevieRW.Corrosion and corrosion control. United States: Third edition; 1985.
12.
HuYLLinXZhangSY. Effect of solution heat treatment on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by laser solid forming. J Alloy Compd. 2018; 767: 330–344. doi: 10.1016/j.jallcom.2018.07.087
TanYJ.Wire beam electrode: a new tool for studying localised corrosion and other heterogeneous electrochemical processes. Corros Sci. 1998; 41: 229–247. doi: 10.1016/S0010-938X(98)00120-6
15.
TanYJBaileySKinsellaB.Mapping non-uniform corrosion using the wire beam electrode method. II. Crevice corrosion and crevice corrosion exemption. Corros Sci. 2001; 43: 1919–1929. doi: 10.1016/S0010-938X(00)00191-8
16.
TangYRWangQYPeiR. A study on the local corrosion behavior and mechanism of electroless Ni–P coatings under flow by using a wire beam electrode. RSC Adv. 2019; 9: 34214–34226. doi: 10.1039/C9RA03814K
17.
WangQYBaiSLLiuZ.Corrosion behavior of Hastelloy C22 coating produced by laser cladding in static and cavitation acid solution. Trans Nonferr Metal Soc. 2014; 24: 1610–1618. doi: 10.1016/S1003-6326(14)63232-5
18.
ShanXPayerJH.Characterization of the corrosion products of crevice corroded alloy 22. J Electrochem Soc. 2009; 156: C313. doi: 10.1149/1.3160365
PanCZhongQDYangJ. Investigating crevice corrosion behavior of 6061 Al alloy using wire beam electrode. J Mater Res Technol. 2021; 14: 93–107. doi: 10.1016/j.jmrt.2021.06.039
21.
YinYLiHPanS. Electrochemical behaviour of passivation film formed on SLM-fabricated Hastelloy X superalloy surface in 10 wt% NaNO3 solution. Corros Sci. 2022; 206: 110494. doi: 10.1016/j.corsci.2022.110494
22.
AsalaGAnderssonJOjoOA.Hot corrosion behaviour of wire-arc additive manufactured Ni-based superalloy ATI 718Plus®. Corros Sci. 2019; 158: 108086. doi: 10.1016/j.corsci.2019.07.010
23.
WangQYPeiRLiuS. Microstructure and corrosion behavior of different clad zones in multi-track Ni-based laser-clad coating. Surf Coat Technol. 2020; 402: 126310. doi: 10.1016/j.surfcoat.2020.126310
24.
ZhuGYLiYYHouBS. Corrosion behavior of 13Cr stainless steel under stress and crevice in high pressure CO2/O2 environment. J Mater Sci Technol. 2021; 88: 79–89. doi: 10.1016/j.jmst.2021.02.018
25.
PourbaixM.Atlas of electrochemical equilibria in aqueous solutions. Journal of Electroanalytical Chemistry. 1974; 13(4): 471–471.
26.
LloydACShoesmithDWMcIntyreNS. Effects of temperature and potential on the passive corrosion properties of alloys C22 and C276. J Electrochem Soc. 2003; 150: B120. doi: 10.1149/1.1554914
27.
HsuKMChenSHLinCS.Microstructure and corrosion behavior of FeCrNiCoMnx (x = 1.0, 0.6, 0.3, 0) high entropy alloys in 0.5 M H2SO4. Corros Sci. 2021; 190: 109694. doi: 10.1016/j.corsci.2021.109694
28.
TanLRenXSridharanK. Corrosion behavior of Ni-base alloys for advanced high temperature water-cooled nuclear plants. Corros Sci. 2008; 50: 3056–3062. doi: 10.1016/j.corsci.2008.08.024
29.
EbrahimiNJakupiPNoëlJJ. The role of alloying elements on the crevice corrosion behavior of Ni-Cr-Mo alloys. Corrosion-US. 2015; 71: 1441–1451. doi: 10.5006/1848
30.
ChenDHanEWuX.Effects of crevice geometry on corrosion behavior of 304 stainless steel during crevice corrosion in high temperature pure water. Corros Sci. 2016; 111: 518–530. doi: 10.1016/j.corsci.2016.04.049
31.
SongFM.Theoretical investigation into time and dimension scaling for crevice corrosion. Corros Sci. 2012; 57: 279–287. doi: 10.1016/j.corsci.2011.12.004
32.
RevieRW.Uhlig's corrosion handbook. United States: Second edition; 2011.
33.
OgawaHOmataHItohI. Auger electron spectroscopic and electrochemical analysis of the effect of alloying elements on the passivation behavior of stainless steels. Corrosion-US. 1978; 34: 52–60. doi: 10.5006/0010-9312-34.2.52
34.
LuYCClaytonCRBrooksAR.A bipolar model of the passivity of stainless steels—II. The influence of aqueous molybdate. Corros Sci. 1989; 29: 863–880. doi: 10.1016/0010-938X(89)90058-9
35.
KennellGFEvittsRWHeppnerKL.A critical crevice solution and IR drop crevice corrosion model. Corros Sci. 2008; 50: 1716–1725. doi: 10.1016/j.corsci.2008.02.020
36.
ZadorozneNSGiordanoCMRodríguezMA. Crevice corrosion kinetics of nickel alloys bearing chromium and molybdenum. Electrochim Acta. 2012; 76: 94–101. doi: 10.1016/j.electacta.2012.04.157
37.
KehlerBAIlevbareGOScullyJR.Crevice corrosion stabilization and repassivation behavior of alloy 625 and alloy 22. Corrosion-US. 2001; 57: 1042–1065. doi: 10.5006/1.3281677
38.
PanLHYangRC.The dependence of the corrosion resistance of Ni-Cr-Mo-Cu alloy to H2SO4 solution on the 4Cr/(2Mo+ Cu). Advanced materials research. 2011; 194-196: 1912–1915.
39.
LiXG.Introduction to corrosion and protection of materials. Beijing: China Machine Press; 2017.
40.
AvestonJAnackerEWJohnsonJS.Hydrolysis of molybdenum(VI). ultracentrifugation, acidity measurements, and Raman spectra of polymolybdates. Inorg Chem. 1964; 3: 735–746. doi: 10.1021/ic50015a030
41.
PyMAMaschkeK.Intra- and interlayer contributions to the lattice vibrations in MoO3. Phys B+C. 1981; 105: 370–374. doi: 10.1016/0378-4363(81)90278-3
