Welded Joints long-term integrity is of particular importance to large vessels, such as frigates or bulk carriers. Downtime due to corrosion concerns can be onerous. Ship classification organisations, such as The American Bureau of Shipping (ABS), standardises processes and product approval programmes for materials manufacturers. High-strength steels are of particular interest due to their high strength to cost ratio for large marine vessel construction. The corrosion performance of such steels has been studied, but data on the specific degradation of such metals when welded and for the welds themselves are scarce. The present paper reports marine immersion corrosion pit depth data for several ABS steel grade weld permutations and exposed to different sites for up to 2.5 years. The implications of the presented results are discussed as well as the possible influence of alloying elements and microstructural differences on the underlying corrosion kinetics.
Ship Structure Committee. Corrosion Experience Data Requirements (SSC-348), US Coast Guard (G-MTH) Washington, American Bureau of Shipping, 102 pages; 1991.
5.
MorrisP. Ships of shame: inquiry into ship safety. Canberra: Parliament of the Commonwealth of Australia, Australian Government Publishing Service; 1992.
6.
PaikJKBrennanFCarlsenCA. Condition assessment of aged ships. Report of the ISSC Specialist Committee, V.6, Int. Ship and Offshore Structures Congress. Southampton (UK): Southampton University Press; 2006.
7.
HareCH.Corrosion control of steel by organic coatings, chapter in Uhlig's Corrosion Handbook,. In: RevieRWNew York: John Wiley & Sons, Inc; 2011. p. 971–983. doi: 10.1002/9780470872864.ch67.
8.
Corrosion Control Engineering. Ship hull corrosion [Online]; 2018. Available at: http://www.cceng.com.au/wp-content/uploads/2016/04/Ship-hull-corrosion-CP-9-1.pdf.
9.
MainierFBPerassolliV.Ship hull corrosion caused by default and lack of maintenance on the impressed current cathodic protection. IOSR J Eng. 2014; 4 (2): 34–39.
10.
VettersA. Corrosion in welds, Proc. International Corrosion Conference, Melbourne, 13-17 November. Paper No 13; 1978.
11.
EidNMA.Localized corrosion at welds in structural steels under desalination plant conditions – part 1: effect of surface roughness and type of welding electrode. Desalination. 1989; 78 (1): 397–406.
12.
MatsushimaI.Localized corrosion of iron and steel. In: Uhlig's corrosion handbook. 3rd ed. NJ: John Wiley and Sons; Hoboken, New Jersey, 2011; p. 616.
13.
TSCF. Condition evaluation and maintenance of tanker structures, Tanker Structures Cooperative Forum, Witherby & Co. London, 182 pp.; 1992.
14.
GardinerCPMelchersRE.Enclosed atmospheric corrosion within ship structures. Br Corros J. 2001; 36 (4): 272–276.
15.
MelchersRE.Progression of pitting corrosion and structural reliability of welded steel pipelines. In: RevieRW, editor. Oil and gas pipelines: integrity and safety handbook.1st ed. John Wiley & Sons; Hoboken, New Jersey, 2015. p. 327–341.
16.
BursteinGTPistoriusPCMattinSP.The nucleation and growth of corrosion pits on stainless steels. Corros Sci. 1993; 35 (1): 57–62.
17.
MorETraversoEVenturaG.Inter-crystalline corrosion of welded stainless steel pipelines in marine environment. Prakt Metallogr. 1974; 11 (1): 477–488.
IACS. Bulk carriers: guidelines for surveys, assessments & repair of hull structures. 2nd ed. London: The International Association of Classification Societies. Witherby. 1856092232, 9781856092234; 2002.
20.
RajputAAkMKimSJNohSHParkJH and PaikJK.Effects of the surface preparation on the life of epoxy coating in steel ship plates: an experimental study, International Conference on Ships and Offshore Structures (ICSOS 2018) 17-19 Sept. Gothenburg, Sweden ; 2018
21.
MelchersRE.A review of trends for corrosion loss and pit depth in longer-term exposures. Corros Mater Degrad. 2018; 1: 4. doi: 10.3390/cmd1010004.
22.
ASM Metals Handbook. Volume 9: metallography and microstructure. OH: American Society for Metals International; Materials Park, Ohio, USA, 1985.
23.
ChavesIAKrismerS. Effect of microstructure in relation to HAZ corrosion of mild steel welds in marine environment. In Proceedings of the ACA Conference: Corrosion and Prevention. 2016; 2016, p. 44-59. Auckland (New Zealand): Australasian Corrosion Association.
24.
ChavesIAMelchersRE.Long-term localised corrosion of marine steel piling welds. Corr Eng Sci Technol. 2013; 48 (1): 469–474.
25.
ChavesIAMelchersRE.Extreme value analysis for assessing structural reliability of welded offshore steel structures. Struct Saf. 2014; 50 (1): 9–15.
26.
LeeCBondS, WoollinP. Preferential weld corrosion: effects of weldment microstructure and composition. Proc. of NACE International Corrosion Congress, April, Seoul, South Korea; 2005.
27.
WangLWLiuZYCuiZY. In situ corrosion characterisation of simulated heat affected zone on API X80 pipeline steel. Corros Sci. 2014; 85 (1): 401–410.
28.
MelchersRE.Long-term immersion corrosion of steels in seawaters with elevated nutrient concentration. Corros Sci. 2014; 81: 110–116.
29.
DavisJR.Corrosion of weldments. OH: American Society for Metals International; Materials Park, Ohio, USA, 2006.
30.
ChavesIJeffreyRMelchersRE.Rust removal from steel coupons after short-term marine immersion. Corrosion. 2015; 71: 811–818.
31.
MelchersREJeffreyR.Corrosion of long vertical strips in the marine tidal zone and implications for ALWC. Corros Sci. 2012; 65 (1): 26–36.
32.
NT Government Department of Lands and Planning. Marine water and sediment quality assessment, 49 pages; 2011.
33.
ASTM G1-03. Standard practice for preparing, cleaning and evaluating corrosion test specimens. PA: ASTM International; 2011.
34.
SmialowskaZS. Proc. of ICLC: pitting and sulphide inclusions in steel, Copenhagen; 1974.
