In this study, the electrochemical behaviour of CrMnFeNi and CrMnFeNiLa0.1 high-entropy alloys (HEAs) in 0.5 M H2SO4 solutions was investigated. Potentiodynamic polarisation curves and electrochemical impedance spectroscopy (EIS) measurements showed that the addition of rare earth element lanthanum has a positive impact in enhancement of corrosion resistance capacity for CrMnFeNi HEAs. The potentiodynamic polarisation curves of the CrMnFeNi and CrMnFeNiLa0.1 alloys exhibit an extensive passive region ((ΔE>1000 mV). Mott–Schottky analysis showed that the donor densities decreased with the addition of La. The possible mechanism regarding the effect of inclusion of La on the dynamic of passivation process was discussed.
YehCSKLinJW.Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes.Adv Eng Mater. 2004; 6:299-303.
2.
HuangY-SChenLLuiH-W. Microstructure, hardness, resistivity and thermal stability of sputtered oxide films of AlCoCrCu0.5NiFe high-entropy alloy. Materials Science and Engineering: A. 2007; 457 (1): 77–83. doi: 10.1016/j.msea.2006.12.001
3.
HsiehK-CYuC-FHsiehW-T. The microstructure and phase equilibrium of new high performance high-entropy alloys. J Alloys Compd. 2009; 483 (1-2): 209–212. doi: 10.1016/j.jallcom.2008.08.118
4.
LiQZhangTWQiaoJW. Superior tensile properties of Al0.3CoCrFeNi high entropy alloys with B2 precipitated phases at room and cryogenic temperatures.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 2019: 767.
5.
HouJZhangMYangH. Surface strengthening in Al0.25CoCrFeNi high-entropy alloy by boronizing. Mater Lett. 2019; 238: 258–260. doi: 10.1016/j.matlet.2018.12.029
6.
GludovatzBHohenwarterACatoorD. A fracture-resistant high-entropy alloy for cryogenic applications. Science. 2014; 345 (6201): 1153–1158. doi: 10.1126/science.1254581
7.
SenkovONIsheimDSeidmanDN. Development of a Refractory high entropy Superalloy. Entropy. 2016; 18 (3):13. doi: 10.3390/e18030102
8.
TangZHuangLHeW. Alloying and Processing effects on the aqueous corrosion behavior of high-entropy alloys. Entropy. 2014; 16 (2): 895–911. doi: 10.3390/e16020895
9.
QiuYThomasSGibsonMA. Corrosion of high entropy alloys.npj Materials Degradation. 2017; 1 (1):18.
10.
MaXChenJWangX. Microstructure and mechanical properties of cold drawing CoCrFeMnNi high entropy alloy. J Alloys Compd. 2019; 795: 45–53. doi: 10.1016/j.jallcom.2019.04.296
11.
MeliaMACarrollJDWhettenSR. Mechanical and Corrosion Properties of Additively Manufactured CoCrFeMnNi High Entropy Alloy. Additive Manufacturing. 2019: 29:13.
12.
LuoHLiZMingersAM. Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution. Corros Sci. 2018; 134: 131–139. doi: 10.1016/j.corsci.2018.02.031
13.
TakenakaTOnoTNarazakiY. Improvement of corrosion resistance of magnesium metal by rare earth elements. Electrochim Acta. 2007; 53 (1): 117–121. doi: 10.1016/j.electacta.2007.03.027
14.
YanGWenlinCZhenG. Effect of rare earth metals on mechanical and corrosion properties of Al-Zn-Mg-Cu-Zr alloy. Rare Met Mater Eng. 2017; 46 (8): 2070–2075. doi: 10.1016/S1875-5372(17)30181-9
15.
YueLWangLHanJ.Effects of rare earth on inclusions and corrosion resistance of 10PCuRE weathering steel. J Rare Earths. 2010; 28 (6): 952–956. doi: 10.1016/S1002-0721(09)60219-2
16.
WuZBeiH.Microstructures and mechanical properties of compositionally complex Co-free FeNiMnCr18 FCC solid solution alloy. Materials Science and Engineering: A. 2015; 640: 217–224. doi: 10.1016/j.msea.2015.05.097
17.
BianBBGuoNYangHJ. A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature. J Alloys Compd. 2020; 827:7.
18.
LiuCRevillaRILiuZ. Effect of inclusions modified by rare earth elements (Ce, La) on localized marine corrosion in Q460NH weathering steel. Corros Sci. 2017; 129: 82–90. doi: 10.1016/j.corsci.2017.10.001
19.
GuoSNgCLuJ. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys. J Appl Phys. 2011; 109 (10): 103505:6. doi: 10.1063/1.3587228
20.
JiangRChenCZhengS.The non-linear fitting method to analyze the measured M–S plots of bipolar passive films. Electrochim Acta. 2010; 55 (7): 2498–2504. doi: 10.1016/j.electacta.2009.11.093
21.
TaveiraLVMontemorMFDa Cunha BeloM. Influence of incorporated Mo and Nb on the Mott–Schottky behaviour of anodic films formed on AISI 304L. Corros Sci. 2010; 52 (9): 2813–2818. doi: 10.1016/j.corsci.2010.04.021
22.
OttoF.DlouhýA.PradeepK. G.KuběnováM.RaabeD.EggelerG.GeorgeE. P.Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures.Acta Mater. 2016; 112: 40–52. doi: 10.1016/j.actamat.2016.04.005
23.
HermasAAMoradMS.A comparative study on the corrosion behaviour of 304 austenitic stainless steel in sulfamic and sulfuric acid solutions. Corros Sci. 2008; 50 (9): 2710–2717. doi: 10.1016/j.corsci.2008.06.029
24.
ChengXQDongCFLiXG. Novel surface treatment for 316L stainless steel using magnetisation technology. Mater Res Innovations. 2013; 17 (7): 557–560. doi: 10.1179/1433075X13Y.0000000101
25.
DongZLiMBehnamianY. Effects of Si, Mn on the corrosion behavior of ferritic–martensitic steels in supercritical water (SCW) environments. Corros Sci. 2020;166: 108432. doi: 10.1016/j.corsci.2020.108432
26.
MessaoudiBJoiretSKeddamM. Anodic behaviour of manganese in alkaline medium. Electrochim Acta. 2001; 46 (16): 2487–2498. doi: 10.1016/S0013-4686(01)00449-2
27.
LeeCPChangCCChenYY. Effect of the aluminium content of AlxCrFe1.5MnNi0.5 high-entropy alloys on the corrosion behaviour in aqueous environments. Corros Sci. 2008; 50 (7): 2053–2060. doi: 10.1016/j.corsci.2008.04.011
28.
CarmezimMJSimoesAMMontemorMF. Capacitance behaviour of passive films on ferritic and austenitic stainless steel. Corros Sci. 2005; 47 (3): 581–591. doi: 10.1016/j.corsci.2004.07.002
29.
AmriJSouierTMalkiB. Effect of the final annealing of cold rolled stainless steels sheets on the electronic properties and pit nucleation resistance of passive films. Corros Sci. 2008; 50 (2): 431–435. doi: 10.1016/j.corsci.2007.08.013
30.
WeiLLiuYLiQ. Effect of roughness on general corrosion and pitting of (FeCoCrNi)0.89(WC)0.11 high-entropy alloy composite in 3.5 wt.% NaCl solution. Corros Sci. 2019; 146: 44–57. doi: 10.1016/j.corsci.2018.10.025
31.
Fattah-alhosseiniASoltaniFShirsalimiF. The semiconducting properties of passive films formed on AISI 316 L and AISI 321 stainless steels: A test of the point defect model (PDM). Corros Sci. 2011; 53 (10): 3186–3192. doi: 10.1016/j.corsci.2011.05.063
32.
NingshenSKamachi MudaliUMittalVK. Semiconducting and passive film properties of nitrogen-containing type 316LN stainless steels. Corros Sci. 2007; 49 (2): 481–496. doi: 10.1016/j.corsci.2006.05.041
33.
FengZChengXDongC. Passivity of 316L stainless steel in borate buffer solution studied by Mott–Schottky analysis, atomic absorption spectrometry and X-ray photoelectron spectroscopy. Corros Sci. 2010; 52 (11): 3646–3653. doi: 10.1016/j.corsci.2010.07.013
34.
Fattah-alhosseiniAVafaeianS.Comparison of electrochemical behavior between coarse-grained and fine-grained AISI 430 ferritic stainless steel by Mott–Schottky analysis and EIS measurements. J Alloys Compd. 2015; 639: 301–307. doi: 10.1016/j.jallcom.2015.03.142
35.
GabenBVROF.Influence of the Chemical Composition and Electronic Structure of Passive Films Grown on 316L SS on Their Transient Electrochemical Behavior. J Electrochem Soc. 2004.151(11):B595-B604
36.
DaiCLuoHLiJ. X-ray photoelectron spectroscopy and electrochemical investigation of the passive behavior of high-entropy FeCoCrNiMox alloys in sulfuric acid. Appl Surf Sci. 2020; 499:10:143903. doi: 10.1016/j.apsusc.2019.143903
37.
De-Sheng KongS-HCWangCYangW.A study of the passive films on chromium by capacitance measurement. Corros Sci. 2003;45:747-758.
38.
ToshevYMandovaVBoshkovN.Protective coating of zinc and zinc alloys for industrial applications. In: MenzW, editor. 4M 2006 - second International Conference on Multi-Material Micro Manufacture. Oxford: Elsevier; 2006. p. 323–326.
39.
Della RovereCAAlanoJHSilvaR. Characterization of passive films on shape memory stainless steels. Corros Sci. 2012; 57: 154–161. doi: 10.1016/j.corsci.2011.12.022
40.
AntunesRAde OliveiraMCLCostaI.Study of the correlation between corrosion resistance and semi-conducting properties of the passive film of AISI 316L stainless steel in physiological solution. Mater Corros. 2011;63:586-592.
41.
Torbati-SarrafMSHJablonskiPDPatakyGJ. The influence of incorporation of Mn on the pitting corrosion performance of CrFeCoNi High Entropy Alloy at different temperatures. Mater Des. 2019;184:12.
42.
BekaertEBuannicLLassiU.Chapter One - Electrolytes for Li- and Na-ion batteries: concepts, candidates, and the role of nanotechnology. In: Rodriguez-MartinezLM, editor. Emerging Nanotechnologies in Rechargeable energy Storage systems. Boston: Elsevier; 2017. p. 1–43.
43.
CattarinSMusianiMTribolletB. Impedance of passive oxide films with graded thickness: influence of the electrode and cell geometry. Electrochim Acta. 2009; 54 (27): 6963–6970. doi: 10.1016/j.electacta.2009.07.004
44.
ZhangTZengCL.Corrosion protection of 1Cr18Ni9Ti stainless steel by polypyrrole coatings in HCl aqueous solution. Electrochim Acta. 2005; 50 (24): 4721–4727. doi: 10.1016/j.electacta.2005.01.049
45.
ShiYYangBXieX. Corrosion of Al CoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior. Corros Sci. 2017; 119: 33–45. doi: 10.1016/j.corsci.2017.02.019
46.
QiaoYXZhengYGKeW. Electrochemical behaviour of high nitrogen stainless steel in acidic solutions. Corros Sci. 2009; 51 (5): 979–986. doi: 10.1016/j.corsci.2009.02.026
47.
QuHPChenHTLangYP.Influence of Mn-Ni alloying elements on surface film and pitting resistance of Cr-Mn austenitic stainless steels. Constr Build Mater. 2016; 125: 427–437. doi: 10.1016/j.conbuildmat.2016.08.059
48.
ZhangBWeiXXWuB. Chloride attack on the passive film of duplex alloy. Corros Sci. 2019; 154: 123–128. doi: 10.1016/j.corsci.2019.04.012
49.
YangJWuJZhangCY. Effects of Mn on the electrochemical corrosion and passivation behavior of CoFeNiMnCr high-entropy alloy system in H2SO4 solution. J Alloys Compd. 2020; 819: 152943. doi: 10.1016/j.jallcom.2019.152943:10
50.
PardoAMerinoMCCoyAE. Effect of Mo and Mn additions on the corrosion behaviour of AISI 304 and 316 stainless steels in H2SO4. Corros Sci. 2008; 50 (3): 780–794. doi: 10.1016/j.corsci.2007.11.004
51.
LvJLuoH.Iushi zhongguo effect of nano/ultrafine grain on passive film properties of metastable austenitic stainless steels with and without loading. Mater Chem Phys. 2013; 139 (2-3): 674–680. doi: 10.1016/j.matchemphys.2013.02.015
52.
JinlongLHongyunL.Comparison of corrosion properties of passive films formed on phase reversion induced nano/ultrafine-grained 321 stainless steel. Appl Surf Sci. 2013; 280: 124–131. doi: 10.1016/j.apsusc.2013.04.108
