To study the corrosion behavior of galvanized steel wires under stress, the influence of stress level, pH value, Cl- concentration and the coupling effect on the corrosion rate of cable steel wire were discussed through stress corrosion test. The prediction formula of corrosion rate of steel wire was established based on response surface method. The constitutive model of steel wire was also put forward. The results showed that the effects of stress level, pH value and Cl- concentration on corrosion rate were pH > Cl- > σ. The stress corrosion increase the corrosion degree of steel wire by 4 times, the degradation ratio of yield and ultimate strength by 2 times, and the degradation rate of elongation and elastic modulus by 3 times. The relationship between the stress level, corrosion degree and the strength or elongation of steel wire was linear, but that of elastic modulus was nonlinear.
MiaoCLiRYuJ.Effects of characteristic parameters of corrosion pits on the fatigue life of the steel wires. J Constr Steel Res. 2019: 105879, doi:10.1016/j.jcsr.2019.105879.
2.
LiRMiaoCYuJ.Effect of characteristic parameters of pitting on strength and stress concentration factor of cable steel wire. Constr Build Mater. 2020; 240: 117915), doi:10.1016/j.conbuildmat.2019.117915.
3.
LiRMiaoCZhuangM.Experimental and numerical investigation of stress concentration factor of cable steel wire with corrosion pits. KSCE J Civil Eng. 2020; 24 (5): 1581–1592.
4.
GarbatovYSaad-EldeenSSoaresGC. Tensile test analysis of corroded cleaned aged steel specimens. Corrosion Eng Sci Technol. 2019; 54 (2): 1–9.
5.
XuSZhangHWangY.Estimation of the properties of corroded steel plates exposed to salt-spray atmosphere. Corrosion Eng Sci Technol. 2019; 54 (5): 431–443.
6.
NieBXuSYuJ.Experimental investigation on corroded cold-formed steel beam-columns under compression and major axis bending. J Constr Steel Res. 2020; 169: 106026), doi:10.1016/j.jcsr.2020.106026.
7.
Zhang Z Flexural performance evaluation of corroded steel beams based on 3D corrosion morphology Xu SNieB. Experimental and numerical investigation of corroded steel columns subjected to in-plane compression and bending. Thin-Walled Struct. 2020; 151: 106735), doi:10.1016/j.tws.2020.106735.
8.
WangYDXuSHLiH.Surface characteristics and stochastic model of corroded structural steel under general atmospheric environment. Acta Metall Sinica. 2020; 56 (2): 148–160.
9.
WatsonSStaffordD.Cables in trouble. Civil Eng. 1988; 58 (4): 38–41.
10.
FuruyaKKitagawaMNakamuraS. Corrosion mechanism and protection methods for suspension bridge cables. Struct Eng Int. 2000; 10 (3): 189–193.
BettiRYanevB.Conditions of suspension bridge cables: New York City case study. Transp Res Rec. 1999; 1654 (1): 105–112.
13.
HamiltonHRIIIBreenJEFrankKH.Investigation of corrosion protection systems for bridge stay cables, Centre for Transportation Research Bureau of Engineering Research, The University of Texas at Austin Research Report No. 1264-3F, November 1995.
14.
BartonSCVermaasGWDubyPF. Accelerated corrosion and embrittlement of high-strength bridge wire. J Mater Civ Eng. 2000; 12 (1): 33–38.
15.
DíazBFreireLNóvoaXR. Electrochemical behaviour of high strength steel wires in the presence of chlorides. Electrochim Acta. 2009; 54 (22): 5190–5198.
16.
SuzumuraKNakamuraSI.Environmental factors affecting corrosion of galvanized steel wires. J Mater Civ Eng. 2004; 16 (1): 1–7.
17.
ChenXYTangMLShenRL.Influencing factors of main cable wires corrosion rate of suspension bridge. J Chong-Qing Jiao-Tong Uni (Nat Sci. 2015; 34 (1): 25–29.
18.
Nakamura SISuzumuraK.Hydrogen embrittlement and corrosion fatigue of corroded bridge wires. J Constr Steel Res. 2009; 69: 269–277.
19.
BettiRWestACVermaasG. Corrosion and embrittlement in high-strength wires of suspension bridge cables. J Bridge Eng. 2005; 10 (2): 151–162.
20.
JBT 7901-2001. Metals materials-uniform corrosion-methods of laboratory immersion testing. Beijing: State Bureau of Machine-Building Industry; 2001.
21.
GB/T 228.1-2010. Tensile test method for metallic materials at room temperature. Beijing: Standards Press of China; 2010.
22.
WangYXuSLiA.Flexural performance evaluation of corroded steel beams based on 3D corrosion morphology. Struct Infrastruct E. 2020. doi:10.1080/15732479.2020.1713169.
23.
ZhangZXuSLiR.Comparative investigation of the effect of corrosion on the mechanical properties of different parts of thin-walled steel. Thin-Walled Struct. 2020; 146: (106450), doi: 10.1016/j.tws.2019.106450.
24.
NieBXuSYuJ.Experimental investigation of mechanical properties of corroded cold-formed steels. J Constr Steel Res. 2019; 162: (105706), doi: 10.1016/j.jcsr.2019.105706.
25.
ShiYJWangMWangYQ.Experimental study of structural steel constitutive relationship under cyclic loading. J Building Mater. 2012; 15 (3): 293–300.
