This work is focused on the evaluation of the corrosion behaviour of an AA2024-T351/SiC surface composite produced by friction stir processing (FSP). The surfaces composite show a quite homogenous distribution of the SiC particles in the stir zone, together with a significant grain size reduction as Electron Backscatter Diffraction analysis confirms. The corrosion behaviour was evaluated in 3.5 wt-% NaCl solution using electrochemical techniques. The complete study shows that all processed samples have similar corrosion resistance at the stirred region and differ from the base material behaviour. The results indicate that the galvanic coupling metal matrix–SiC particles are less active than the galvanic coupling metal matrix–Cu-rich second phases. Although the initial corrosion resistance of the base aluminium alloy is the worst of all systems studied, for long immersion times the development of corrosion through grain boundaries was found to progressdeeper in the 2024Al/SiC surface produced by FSP.
MishraRSMaZY.Friction stir welding and processing. Mater Sci Eng R Reports. 2005; 50: 1–78. doi: 10.1016/j.mser.2005.07.001
2.
GandraJVigarinhoPPereiraD. Wear characterization of functionally graded Al–SiC composite coatings produced by friction Surfacing. Mater Des2013; 52: 373–383. doi: 10.1016/j.matdes.2013.05.059
3.
MahmoudERITakahashiMShibayanagiT. Wear characteristics of surface-hybrid-MMCs layer fabricated on aluminum plate by friction stir processing. Wear. 2010; 268: 1111–1121. doi: 10.1016/j.wear.2010.01.005
4.
MaYZhouXLiaoY. Localised corrosion in AA 2099-T83 aluminium-lithium alloy: The role of grain orientation. Corros Sci2016; 107: 41–48. doi: 10.1016/j.corsci.2016.02.018
5.
DeepakDSidhuRSGuptaVK.Preparation of 5083 Al-SiC surface composite by friction stir processing and its mechanical characterization. Int J Mech Eng2013; 3: 1–11.
6.
Sahandi ZangabadPKhodabakhshiFSimchiA. Fatigue fracture of friction-stir processed Al–Al3Ti–MgO hybrid nanocomposites. Int J Fatigue. 2016; 87: 266–278. doi: 10.1016/j.ijfatigue.2016.02.007
7.
Shafiei-ZarghaniAKashani-BozorgSFZarei-HanzakiA.Microstructures and mechanical properties of Al/Al2O3 surface nano-composite layer produced by friction stir processing. Mater Sci Eng A. 2009; 500: 84–91. doi: 10.1016/j.msea.2008.09.064
8.
DhayalanRKalaiselvanKSathiskumarR.Characterization of AA6063/SiC-Gr surface composites produced by FSP technique. Procedia Eng2014; 97: 625–631. doi: 10.1016/j.proeng.2014.12.291
9.
DuZTanMJGuoJF. Fabrication of a new Al-Al2O3-CNTs composite using friction stir processing (FSP). Mater Sci Eng A. 2016; 667: 125–131. doi: 10.1016/j.msea.2016.04.094
10.
PalanivelRDinaharanILaubscherRF. Influence of boron nitride nanoparticles on microstructure and wear behavior of AA6082/TiB2 hybrid aluminum composites synthesized by friction stir processing. JMADE. 2016; 106: 195–204.
11.
MishraRSMaZYCharitI.Friction stir processing: a novel technique for fabrication of surface composite. Mater Sci Eng A. 2003; 341: 307–310. doi: 10.1016/S0921-5093(02)00199-5
12.
WangWyu ShiQLiuP. A novel way to produce bulk SiCp reinforced aluminum metal matrix composites by friction stir processing. J Mater Process Technol2009; 209: 2099–2103. doi: 10.1016/j.jmatprotec.2008.05.001
13.
DevarajuAKumarAKumaraswamyA. Wear and mechanical properties of 6061-T6 aluminum alloy surface hybrid composites [(SiC+Gr) and (SiC+Al2O3)] fabricated by friction stir processing. J Mater Res Technol2013; 2: 362–369. doi: 10.1016/j.jmrt.2013.10.004
14.
GuillauminVMankowskiG.Localized corrosion of 2024 T351 aluminium alloy in chloride media. Corros Sci1998; 41: 421–438. doi: 10.1016/S0010-938X(98)00116-4
15.
DeRoseJASuterTBałkowiecA. Localised corrosion initiation and microstructural characterisation of an Al 2024 alloy with a higher Cu to Mg ratio. Corros Sci2012; 55: 313–325. doi: 10.1016/j.corsci.2011.10.035
16.
Zaki AhmadMAbdul AleemB. In: AhmadZ, editor. New trends in Casting, welding and environmental degradation of aluminium alloys. London: InTech; 2011. p. 385–406.
17.
TrowsdaleAJNobleBHarrisSJ. The influence of silicon carbide reinforcement on the pitting behaviour of aluminium. Corros Sci1996; 38: 177–191. doi: 10.1016/0010-938X(96)00098-4
18.
TiwariSBalasubramaniamRGuptaM.Corrosion behavior of SiC reinforced magnesium composites. Corros Sci2007; 49: 711–725. doi: 10.1016/j.corsci.2006.05.047
19.
Mosleh-ShizardiSAkhalaghiFLiDY.Effect of SiC content on dry sliding wear, corrosion and corrosive wear of Al/SiC nanocomposites. Trans Nonferrous Met Soc China (English Ed)2016; 26: 1801–1808. doi: 10.1016/S1003-6326(16)64294-2
20.
YueTMWuYXManHC.On the role of CuAl2 precipitates in pitting corrosion of aluminium 2009/SiCW metal matrix composite. J Mater Sci Lett2000; 19: 1003–1006. doi: 10.1023/A:1006745028307
21.
ZakariaHM.Microstructural and corrosion behavior of Al/SiC metal matrix composites. Ain Shams Eng J2014; 5: 831–838. doi: 10.1016/j.asej.2014.03.003
22.
CandanS.Effect of SiC particle size on corrosion behavior of pressure infiltrated Al matrix composites in a NaCl solution. Mater Lett2004; 58: 3601–3605. doi: 10.1016/j.matlet.2004.06.053
23.
FondaRWKniplingKEBingertJF.Microstructural evolution ahead of the tool in aluminum friction stir welds. Scr Mater2008; 58: 343–348. doi: 10.1016/j.scriptamat.2007.09.063
24.
AbreuCMAcuñaRCabezaM. Microstructure and mechanical properties of Al/SiC composite surface layer produced by friction stir processing. Cienc e Tecnol dos Mater. 2017; 29: 82–86.
25.
BoagAHughesAEWilsonNC. How complex is the microstructure of AA2024-T3?Corros Sci2009; 51: 1565–1568. doi: 10.1016/j.corsci.2009.05.001
26.
HughesAEGlennAMWilsonN. A consistent description of intermetallic particle composition: An analysis of ten batches of AA2024-T3. Surf Interface Anal2013; 45: 1558–1563. doi: 10.1002/sia.5207
27.
SeidelTUReynoldsAP.Visualization of the material flow in AA2195 friction-stir welds using a marker insert technique. Metall Mater Trans A. 2001; 32: 2879–2884. doi: 10.1007/s11661-001-1038-1
28.
JohannesLBCharitIMishraRS. Enhanced superplasticity through friction stir processing in continuous cast AA5083 aluminum. Mater Sci Eng A. 2007; 464: 351–357. doi: 10.1016/j.msea.2007.02.012
29.
SatoYSKokawaHEnomotoM. Microstructural evolution of 6063 aluminum during friction-stir welding. Metall Mater Trans A. 1999; 30: 2429–2437. doi: 10.1007/s11661-999-0251-1
30.
GenevoisCDeschampsADenquinA. Quantitative investigation of precipitation and mechanical behaviour for AA2024 friction stir welds. Acta Mater2005; 53: 2447–2458. doi: 10.1016/j.actamat.2005.02.007
31.
AugustinCAndrieuEBlanC. Intergranular corrosion of 2024 alloy in chloride solutions. J Electrochem Soc2007; 154: C637–C644. doi: 10.1149/1.2778224
32.
FerrellRTHimmelblauDM.Diffusion coefficients of nitrogen and oxygen in water. J Chem Eng Data. 1967; 12: 111–115. doi: 10.1021/je60032a036
33.
McCaffertyE.Introduction to corrosion science. New York (NY): Springer; 2010.
ZhouXLuoCHashimotoT. Study of localized corrosion in AA2024 aluminium alloy using electron tomography. Corros Sci2012; 58: 299–306. doi: 10.1016/j.corsci.2012.02.001
36.
ShaoMFuYHuR. A study on pitting corrosion of aluminum alloy 2024-T3 by scanning microreference electrode technique. Mater Sci Eng A. 2003; 344: 323–327. doi: 10.1016/S0921-5093(02)00445-8
37.
DimitrovNMannJAVukmirovicM. Dealloying of Al2CuMg in Alkaline media. J Electrochem Soc2000; 147: 3283–3285. doi: 10.1149/1.1393896
38.
KingPCColeISCorriganPA. FIB/SEM study of AA2024 corrosion under a seawater drop: Part I. Corros Sci2011; 53: 1086–1096. doi: 10.1016/j.corsci.2010.12.004
39.
KingPCColeISCorriganPA. FIB/SEM study of AA2024 corrosion under a seawater drop, part II. Corros Sci2012; 55: 116–125. doi: 10.1016/j.corsci.2011.10.012
40.
SchmutzPFrankelGS.Characterization of AA2024-T3 by scanning Kelvin probe Force microscopy. J Electrochem Soc1998; 145: 2285. doi: 10.1149/1.1838633
41.
LeblancPFrankelGS.A study of corrosion and pitting initiation of AA2024-T3 using Atomic Force microscopy. J Electrochem Soc2002; 149: B239. doi: 10.1149/1.1471546
42.
HashimotoTZhangXZhouX. Investigation of dealloying of S phase (Al2CuMg) in AA 2024-T3 aluminium alloy using high resolution 2D and 3D electron imaging. Corros Sci. 2016; 103: 157–164. doi: 10.1016/j.corsci.2015.11.013
43.
BoagATaylorRJMusterTH. Stable pit formation on AA2024-T3 in a NaCl environment. Corros Sci2010; 52: 90–103. doi: 10.1016/j.corsci.2009.08.043
44.
JorcinJ-BBlancCPébèreN. Galvanic coupling between pure copper and pure aluminum. J Electrochem Soc2008; 155: C46–C51. doi: 10.1149/1.2803506
45.
BuchheitRG.Local dissolution phenomena associated with S phase (Al2CuMg) particles in Aluminum alloy 2024-T3. J Electrochem Soc1997; 144: 2621. doi: 10.1149/1.1837874
46.
CollazoAHernándezMNóvoaXR. Effect of the addition of thermally activated hydrotalcite on the protective features of sol–gel coatings applied on AA2024 aluminium alloys. Electrochim Acta. 2011; 56: 7805–7814. doi: 10.1016/j.electacta.2011.03.067
47.
AbreuCMCristóbalMJFigueroaR. Wear and corrosion performance of two different tempers (T6 and T73) of AA7075 aluminium alloy after nitrogen implantation. Appl Surf Sci. 2015; 327: 51–61. doi: 10.1016/j.apsusc.2014.11.111
48.
GodinoNBorriseXMuñozFX. Mass transport to nanoelectrode arrays and limitations of the diffusion domain approach: Theory and experiment. J Phys Chem C. 2009; 113: 11119–11125. doi: 10.1021/jp9031354
49.
TesfayeATYücelYDBarrMKS. The electrochemical behavior of SnSb as an anode for Li-ion Batteries studied by electrochemical impedance spectroscopy and electron microscopy. Electrochim Acta. 2017; 256: 155–161. doi: 10.1016/j.electacta.2017.10.031
50.
CattarinSFlechterSPettenkoferC. Interfacial Reactivity and oscillating behavior of chalcopyrite cathodes during H2O2 reduction. J Electrochem Soc1990; 137: 3484–3493. doi: 10.1149/1.2086254
51.
GuitiánBNóvoaXRPugaB.Electrochemical impedance spectroscopy as a tool for materials selection: water for haemodialysis. Electrochim Acta. 2011; 56: 7772–7779. doi: 10.1016/j.electacta.2011.03.055
