This work describes the influence of standoff distance (SoD), and gas temperature on the morphology and corrosion resistance of Al-10%Al2O3 coatings deposited by cold gas spray (CGS) on carbon steel. The results showed that the standoff distance had little effect on the thickness and microstructure of the coating. However, a 100 °C decrease of the spraying temperature reduced the coating thickness by 300 µm. The use of electrochemical analyses and SEM images showed that all the coatings studied were able to protect the substrate during at least 1300 h of immersion, due to the dense microstructure obtained by CGS.
LiWYangKYinSSolid-state additive manufacturing and repairing by cold spraying: a review. J Mater Sci Technol. 2018; 34 (3): 440–457. doi: 10.1016/j.jmst.2017.09.015
3.
TaoYXiongTSunCEffect of α-Al2O3 on the properties of cold sprayed Al/α-Al2O3 composite coatings on AZ91D magnesium alloy. Appl Surf Sci. 2009; 256 (1): 261–266. doi: 10.1016/j.apsusc.2009.08.012
4.
SpencerKFabijanicDMZhangMX.The use of Al-Al2O3 cold spray coatings to improve the surface properties of magnesium alloys. Surf Coatings Technol. 2009; 204 (3): 336–344. doi: 10.1016/j.surfcoat.2009.07.032
CongDLiZHeQWear behavior of corroded Al-Al2O3 composite coatings prepared by cold spray. Surf Coatings Technol. 2017; 326: 247–254. doi: 10.1016/j.surfcoat.2017.07.063
7.
QiuXulNTariqHMicrostructure, microhardness and tribological behavior of Al2O3 reinforced A380 aluminum alloy composite coatings prepared by cold spray technique. Surf Coatings Technol. 2018; 350: 391–400. doi: 10.1016/j.surfcoat.2018.07.039
8.
ChampagneVK.The cold spray materials deposition process: fundamentals and applications, 2007.
9.
ZhaoCZhangHShaoTMicrostructure and corrosion behaviour of Al coating deposited by cold spraying onto FSW AA2219-T87 joint. Corros Eng Sci Techn. 2019; 54 (1): 86–92. doi: 10.1080/1478422X.2018.1540143
10.
SilvaFS D.BedoyaJDostaSCorrosion characteristics of cold gas spray coatings of reinforced aluminum deposited onto carbon steel. Corros Sci. 2017; 114: 57–71. doi: 10.1016/j.corsci.2016.10.019
11.
TaitWS.An introduction to electrochemical corrosion testing for practicing engineers and scientists, Wisconsin Pair Odocs, 1994.
12.
OrazemMTribolletB.Electrochemical impedance spectroscopy. 1st ed.NJ: John Wiley; 2008.
13.
ZhouXMohantyP.Electrochemical behavior of cold sprayed Hydroxyapatite/titanium composite in Hanks’ solution. Electrochim Acta. 2012; 65: 134–140. doi: 10.1016/j.electacta.2012.01.018
14.
HeimannRBKleimanJIMarxSHigh-pressure cold gas dynamic (CGD) – sprayed alumina-reinforced aluminum coatings for potential application as space construction material. Surf Coat Technol. 2014; 252: 113–119. doi: 10.1016/j.surfcoat.2014.04.053
15.
TaoYXiongTSunCEffect of α-Al2O3 on the properties of cold sprayed Al/α-Al2O3 composite coatings on AZ91D magnesium alloy. Appl Surf Sci. 2009; 256 (1): 261–266. doi: 10.1016/j.apsusc.2009.08.012
16.
YinSCavalierePAldwellBCold spray additive manufacturing and repair: fundamentals and applications. Addit Manuf. 2018; 21: 628–650. doi: 10.1016/j.addma.2018.04.017
17.
PattisonJCelottoSKhanAStandoff distance and Bow Shock phenomena in the cold spray process. Surf Coat Technol. 2008; 202 (8): 1443–1454. doi: 10.1016/j.surfcoat.2007.06.065
18.
StoltenhoffTKreyeHRichterHJ.An analysis of the cold spray process and its coatings. J Therm Spray Technol. 2002; 11 (4): 542–550. doi: 10.1361/105996302770348682
19.
MengXZhangJZhaoJInfluence of Gas temperature on microstructure and properties of cold spray 304SS coating. J Mater Sci Technol. 2011; 27 (9): 809–815. doi: 10.1016/S1005-0302(11)60147-3
20.
Hassani-GangarajSMMoridiAGuaglianoM.Critical review of corrosion protection by cold spray coatings. Surf Eng. 2015; 31 (11): 803–815. doi: 10.1179/1743294415Y.0000000018
21.
IrissouELegouxJGArsenaultBInvestigation of Al-Al2O3 cold spray coating formation and properties. J. Therm. Spray Technol. 2007; 16 (5-6): 661–668. doi: 10.1007/s11666-007-9086-8
22.
McCaffertyE.Sequence of Steps in the pitting of aluminum by chloride ions. Corros Sci. 2003; 45 (7): 1421–1438. doi: 10.1016/S0010-938X(02)00231-7
23.
BirbilisNBuchheitRG.Electrochemical characteristics of intermetallic phases in aluminum alloys. J Electrochem Soc. 2005; 152 (4): B140–B151. doi: 10.1149/1.1869984
24.
FrersSEStefenelMMMayerCAC-Impedance measurements on aluminium in chloride containing solutions and below the pitting potential. J Appl Electrochem. 1990; 20 (6): 996–999. doi: 10.1007/BF01019578
