The influence of the galvanic effects on the welded joints of A710 high-strength weathering steel with two different weld metals (80Ni1-H4 and WER70) under a simulated marine atmospheric environment was investigated by employing Scanning Kelvin Probe (SKP), galvanic current measurements, cyclic wet/dry accelerated corrosion testing, Field-Emission Scanning Electron Microscopy (FE-SEM) and other approaches. The results indicate that the average galvanic currents for the HAZ-BM and HAZ-WM couples of the two welded joints initially decreased and then gradually stabilised, which is related to the formation of a stable rust layer. In addition, the WER70 welded joints presented a higher average corrosion rate than for the 80Ni1-H4 welded joints. The significant galvanic effect of the WER70 welded joints and the formation of a compact rust layer are the dominant effects during the initial and later corrosion stages, respectively.
ZhouFChengRXingxiang WUResearch on welding process and microstructure and properties of welded joint of 09CuPCrNi-A and 316L dissimilar steel. J Jiangsu Univ Sci Technol. 2016; 30 (2): 131–135.
2.
WangSMaQLiY.Characterization of microstructure, mechanical properties and corrosion resistance of dissimilar welded joint between 2205 duplex stainless steel and 16MnR. Mater Des. 2011; 32 (2): 831–837.
3.
ChaoYLZhouYLWangQLCorrosion performance of welded joint and base steel of Cu–P–Cr weathering steel by cyclic immersion in Na HSO3 solution. Trans Mater Heat Treat. 2015; 36 (2): 84–90.
4.
XuXXiang-Yang WUZhi-YiZEffects of welding processes on corrosion behavior of SMA490BW weathering steel joints. Surf Technol. 2018; 47 (10): 256–261.
5.
GongLXingQWangH.Corrosion behaviors of weathering steel 09CuPCrNi welded joints in simulated marine atmospheric environment. Anti-Corros Methods Mater. 2016; 63 (4): 295–300.
6.
LiuPHanSYiY. Corrosion behavior of welded joint of Q690 with CMT twin. Int J Corros. 2018; 2018: 1–9.
7.
AhmadiMMirsalehiSE.Investigation on microstructure, mechanical properties and corrosion behavior of AISI 316L stainless steel to ASTM A335-P11 low alloy steel dissimilar welding joints. Mater High Temp. 2015; 32 (6): 627–635.
8.
WangSMaQLiY.Characterization of microstructure, mechanical properties and corrosion resistance of dissimilar welded joint between 2205 duplex stainless steel and 16MnR. Mater Des. 2011; 32 (2): 831–837.
9.
ZhuJXuLFengZGalvanic corrosion of a welded joint in 3Cr low alloy pipeline steel. Corros Sci. 2016; 111: 391–403.
10.
SrinivasanBDietzelWZettlerRStress corrosion cracking susceptibility of friction stir welded AA7075-AA6056 dissimilar joint. Mater Sci Eng A. 2005; 392 (1): 292–300.
11.
Blasco-TamaritEIgual-MuñozAAntón JG.Effect of temperature on the galvanic corrosion of a high alloyed austenitic stainless steel in its welded and non-welded condition in LiBr solutions. Corros Sci. 2007; 49 (12): 4472–4490.
12.
WanHDuCLiuZThe effect of hydrogen on stress corrosion behavior of X65 steel welded joint in simulated deep sea environment. Ocean Eng. 2016; 114: 216–223.
13.
BaboianR.Corrosion, Galvanic. Encyclopedia of Materials: Science and Technology. 2001: 1689–1690.
14.
FangNChenGZhuHStatistical analysis of leakage accidents of submarine pipeline. Oil Gas Storage Transp. 2014; 33 (1): 99–103.
15.
ZhangRChenliangRDapeng LIGalvanic corrosion behavior of dissimilar metal coupling in highly acidic environments. Corros Prot. 2017; 38 (9): 671–688.
16.
AryaCVassie PRW.Influence of cathode-to-anode area ratio and separation distance on galvanic corrosion currents of steel in concrete containing chlorides. Cem Concr Res. 1995; 25 (5): 989–998.
17.
VarelaFEKurataYSanadaN.The influence of temperature on the galvanic corrosion of a cast iron-stainless steel couple (prediction by boundary element method). Corros Sci. 1997; 39 (4): 775–788.
18.
JinD.Study on microstructure properties and corrosion resistance mechanism of weathering bridge steel. Northeastern University; 2014.
19.
AhmadiMMirsalehiSE.Investigation on microstructure, mechanical properties and corrosion behavior of AISI 316L stainless steel to ASTM A335-P11 low alloy steel dissimilar welding joints. Mater High Temp. 2015; 32 (6): 627–635.
20.
ZhangXYangSZhangWInfluence of outer rust layers on corrosion of carbon steel and weathering steel during wet–dry cycles. Corros Sci. 2014; 82 (5): 165–172.
21.
AsoTUtsumiT.The corrosion behavior of weathering steel under different corrosive environments. Australasia and South-East Asia Structural Engineering and Construction Conference; 2014.
22.
ZhangW-y.Progress in research on galvanic corrosion behavior and protection. Total Corros Control. 2018; 32 (12). 51-56+122.
23.
WeiJDongJKeW. Influence of inclusions on early corrosion development of ultra-low carbon Bainitic steel in NaCl solution. Corrosion. 2015; 71(12): 1467–1480.
24.
SunW.Numerical simulation of the influences of deposited corrosion products on localized corrosion behavior. Dalian Universal of Technology; 2013.
25.
WenSLiuGWangLA mathematical model for modeling the formation of calcareous deposits on cathodically protected steel in seawater. Electrochim Acta. 2012; 78 (9): 597–608.
26.
WangYPZuoXRLiJL.Corrosion resistance of the welded joint of submarine pipeline steel with ferrite plus bainite dual-phase microstructure. Steel Res Int. 2015; 86 (11): 1260–1270.
27.
GuilhermeLHRovereCADKuriSECorrosion behaviour of a dissimilar joint TIG weld between austenitic AISI 316L and ferritic AISI 444 stainless steels. Weld Int. 2016; 19 (1): 42–50.
