We present a study of the synthesis and an evaluation of the corrosion resistance of Ti-Zr-Si-N coatings deposited by means of the co-sputtering technique on 316L steel and Ti6Al4V alloy substrates. The thin films were obtained using Ti5Si2 and Zr targets with 99.9% purity for the deposition, and a power of 200 W was applied in the DC source and 170 W in the RF source. The corrosion resistance was evaluated via the cyclic oxidation test with consistent cycles of 1 hour of cooling, 1 hour of heating, and 16 minutes of stabilisation for 300 cycles at a temperature of 600°. The coatings were characterised by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), and confocal laser microscopy. The coating was effective up to 150 cycles for the case of 316L steel, and up to 50 cycles for the Ti6AlV alloy.
KirikGVKozakCOpielakM.Protective coatings based on Zr-Ti-Si-N their physical and mechanical properties and phase composition. Przeglad Elektrotechniczny. 2012; 88 (10A): 319–321.
KannanAReddyP.The effect of annealing on the structural, optical and electrical properties of titanium nitride (TiN) thin films prepared by DC magnetron sputtering with supported discharge. J Mater Sci: Mater Electron..2016; 27 (10): 10427–10434.
4.
LeclairPBereraGPMooderaJS.Titanium nitride thin films obtained by a modified physical vapor deposition process. Thin Solid Films. 2000; 376 (1-2): 9–15. doi: 10.1016/S0040-6090(00)01192-5
5.
IngasonASMagnusFAgustssonJSIn-situ electrical characterization of ultrathin TiN films grown by reactive dc magnetron sputtering on SiO2. Thin Solid Films. 2009; 517 (24): 6731–6736. doi: 10.1016/j.tsf.2009.05.028
6.
CuiXJinGHaoJThe influences of Si content on biocompatibility and corrosion resistance of Zr-Si-N films. Surf Coat Technol. 2013; 228: S524–S528. doi: 10.1016/j.surfcoat.2012.04.060
7.
KavithaAKannanRReddyPSThe effect of annealing on the structural, optical and electrical properties of titanium nitride (TiN) thin films prepared by DC magnetron sputtering with supported discharge. J Mater Sci: Mater Electron. 2016; 27 (10): 10427–10434.
8.
PaldeySDeeSC.Single layer and multilayer wear resistant coatings of (Ti, Al) N: a review. Mater Sci Eng A. 2003; 342 (1-2): 58–79. doi: 10.1016/S0921-5093(02)00259-9
9.
UglovVVAnishchikVMKhodasevichVVStructural characterization and mechanical properties of Ti–Zr–N coatings, deposited by vacuum arc. Surf Coat Technol. 2004; 180: 519–525. doi: 10.1016/j.surfcoat.2003.10.095
10.
ChinsakolthanakornSBuranawongAWitit-anunN.Characterization of nanostructured TiZrN thin films deposited by reactive DC magnetron co-sputtering. Procedia Eng. 2012; 32: 571–576. doi: 10.1016/j.proeng.2012.01.1310
11.
LinYHuangJYuG.Effect of nitrogen flow rate on properties of nanostructured TiZrN thin films produced by radio frequency magnetron sputtering. Thin Solid Films. 2010; 518 (24): 7308–7311. doi: 10.1016/j.tsf.2010.04.099
12.
JiangNShenYGMaiYNanocomposite Ti–Si–N films deposited by reactive unbalanced magnetron sputtering at room temperature. Mater Sci Eng B. 2004; 106 (2): 163–171. doi: 10.1016/j.mseb.2003.09.033
13.
HuXHanZLiGMicrostructure and properties of Ti–Si–N nanocomposite films. J Vac Sci Technol A. 2002; 20: 1921. doi: 10.1116/1.1508802
14.
SaladukhinIAAbadiasGMichelAStructure and hardness of quaternary TiZrSiN thin films deposited by reactive magnetron co-sputtering. Thin Solid Films. 2015; 581: 25–31. doi: 10.1016/j.tsf.2014.11.020
15.
Sobol’OVPogrebnyakADBeresnevVM.Effect of the preparation conditions on the phase composition, structure, and mechanical characteristics of vacuum-Arc Zr-Ti-Si-N coatings. Phys Met Metallogr. 2011; 112 (2): 188–195. doi: 10.1134/S0031918X11020268
16.
PogrebnyakADSobol’OVBeresnevVMFeatures of the structural state and mechanical properties of ZrN and Zr(Ti)-Si-N coatings obtained by ion-plasma deposition technique. Tech Phys Lett. 2009; 35 (10): 925–928. doi: 10.1134/S1063785009100150
17.
LinYWHuangJHYuGPInfluence of ion bombardment on structure and properties of TiZrN thin film. Appl Surf Sci. 2015; 354: 155–160. doi: 10.1016/j.apsusc.2015.02.190.
18.
YalamanchiliKForsénRJiménez-PiquéEStructure, deformation and fracture of arc evaporated Zr-Si-N hard films. Surf Coat Technol. 2014; 258: 1100–1107. doi: 10.1016/j.surfcoat.2014.07.024
19.
BraicMBraicVVladescuASolid solution or amorphous phase formation in TiZr-based ternary to quinternary multi-principal-element films. Prog Nat Sci. 2014; 24 (4): 305–312. doi: 10.1016/j.pnsc.2014.06.001
20.
BorjaENOlayaJJ.A microstructural and corrosion resistance study of (Zr, Si. Ti)N-Ni coatings produced through co-sputtering. Dyna. 2018; 85 (207): 192–187. doi: 10.15446/dyna.v85n207.73304
21.
Bolívar-OsorioFJ.Evaluation of the behavior at high temperatures of the coatings of aluminum, Si and aluminum modified with Si and Hf deposited through CVD-FBR on ferriform-martensitic steels (9-12% of Cr)[dissertation]. Madrid (Spain): Universidad Complutense de Madrid; 2009.Spanish.
22.
PogrebnjakADShpakAPBeresnevVMEffect of thermal annealing in vacuum and in air on nanograin sizes in hard and superhard coatings Zr–Ti–Si–N. J Nanosci Nanotechnol. 2012; 12 (12): 9213–9219. doi: 10.1166/jnn.2012.6777
23.
Marulanda-ArevaloJLRemolina-MillanABaronJA.Steam oxidation in stainless steel AISI 317 at 700 and 750° C. Dyna. 2013; 80 (179): 151–156.
24.
ReboutaLVazFAndritschkyMOxidation resistance of (Ti,Al,Zr,Si)N coatings in air. Surf Coat Technol. 1995; 76: 70–74. doi: 10.1016/0257-8972(95)02501-4
25.
BeresnevVMKlimenkoSAToryanikINSuperhard coatings of the (Zr-Ti-Si)N and (Ti-Hf-Si)N systems produced by vacuum-arc deposition from a separated flow. J Superhard Mater. 2014; 36 (1): 29–34. doi: 10.3103/S1063457614010055
26.
PogrebnjakABaidakVBeresnevVPhysical-mechanical properties of superhard nanocomposite coatings on base Zr-Ti-Si-N. Mater Sci. 2013; 19 (2): 140–143.
27.
KumarPAPandeySMishraRCharacterization of stainless steel 316 l coated by thermal spray coating. Int J Adv Res Ideas Innov Technol. 2016; 2 (3): 1–7.
28.
ZhangSSunDBuiXL.Nanocomposite thin films and coatings processing, properties and performance. London: Imperial College Press; 2002; Chapter 1, Magnetron sputtered hard and yet tough nanocomposite coatings with case studies: nanocrystalline TiN embedded in amorphous SiNx; p. 1-110.
