In order to achieve excellent heat resistance and corrosion resistance, high melting-point and rare earth elements were added to ferritic stainless steel. The effect of W and Ce addition in ferritic stainless steel on the corrosion resistance in 0.1 M NaOH solution was studied. Potentiodynamic polarisation curves indicated that W- and Ce-containing samples had lower corrosion rate and lower passive current density. The electrochemical impedance spectroscopy measurements revealed that W–Ce-containing samples had higher polarisation resistance values and thicker passive films. Capacitance analysis indicated that the semiconducting behaviour and the properties of passive film remain unchanged. The addition of W and Ce led to a decrease in donor and acceptor density, which improved the passive film stability.
MaLHuSShenJEffects of annealing temperature on microstructure, mechanical properties and corrosion resistance of 30% Cr super ferritic stainless steel. Mater Lett. 2016; 184: 204–207. doi: 10.1016/j.matlet.2016.08.062
2.
HanJLiHZhuZEffects of processing optimisation on microstructure, texture, grain boundary and mechanical properties of Fe–17Cr ferritic stainless steel thick plates. Mater Sci Eng A. 2014; 616: 20–28. doi: 10.1016/j.msea.2014.07.107
3.
KhorramiMSMostafaeiMAPouraliakbarHStudy on microstructure and mechanical characteristics of low-carbon steel and ferritic stainless steel joints. Mater Sci Eng A. 2014; 608: 35–45. doi: 10.1016/j.msea.2014.04.065
4.
LuoHSuHDongCElectrochemical and passivation behavior investigation of ferritic stainless steel in alkaline environment. Constr Build Mater. 2015; 96: 502–507. doi: 10.1016/j.conbuildmat.2015.08.052
5.
HongTNagumoMJepsonWP.Influence of HNO3 treatments on the early stages of pitting of type 430 stainless steel. Corros Sci. 2000; 42: 289–298. doi: 10.1016/S0010-938X(99)00067-0
6.
BitondoCBossioAMonttaTThe effect of annealing on the corrosion behavior of 444 stainless steel for drinking water applications. Corros Sci. 2014; 87: 6–10. doi: 10.1016/j.corsci.2014.06.025
7.
SilvaCCMachadoJPSESobral-SangtigoAVC.High-temperature hydrogen sulfide corrosion on the heat-affected zone of the AISI 444 stainless steel caused by Venezuelan heavy petroleum. J Petrol Sci Eng. 2007; 59: 219–225. doi: 10.1016/j.petrol.2007.04.003
8.
SilvaCCFariasJPMirandaHCMicrostructural characterization of the HAZ in AISI 444 ferritic stainless steel welds. Mater Charact. 2008; 59: 528–533. doi: 10.1016/j.matchar.2007.03.011
9.
TavaresSSMde SouzaJAHerculanoLFGMicrostructural, magnetic and mechanical property changes in an AISI 444 stainless steel aged in the 560°C to 800°C range. Mater Charact. 2008; 59: 112–116. doi: 10.1016/j.matchar.2006.11.002
10.
OlssonCOALandoltD.Passive films on stainless steels-chemistry, structure and growth. Electrochim Acta. 2003; 48: 1093–1104. doi: 10.1016/S0013-4686(02)00841-1
11.
LiuXYangJYangLEffect of Ce on inclusions and impact property of 2Cr13 stainless steel. J Iron Steel Res Int. 2010; 17: 59–64. doi: 10.1016/S1006-706X(10)60198-7
12.
HaHYParkCJKwonHS.Effects of misch metal on the formation of non-metallic inclusions and the associated resistance to pitting corrosion in 25% Cr duplex stainless steels. Scripta Mater. 2006; 55: 991–994. doi: 10.1016/j.scriptamat.2006.08.014
13.
YangHYangKZhangB.Pitting corrosion resistance of La added 316L stainless steel in simulated body fluids. Mater Lett. 2007; 61: 1154–1157. doi: 10.1016/j.matlet.2006.06.071
14.
JeonSHKimSTChoiMSEffects of cerium on the compositional variations in and around inclusions and the initiation and propagation of pitting corrosion in hyper duplex stainless steels. Corros Sci. 2013; 75: 367–375. doi: 10.1016/j.corsci.2013.06.020
15.
FujikawaHNewcombSB.High temperature oxidation behavior of high Al content ferritic and austenitic stainless steels with and without rare-earth element addition. Oxid Met. 2012; 77: 85–92. doi: 10.1007/s11085-011-9274-2
16.
SriramSBalasubramaniamRMungoleMNEffect of cerium addition on the corrosion behavior of carbon-alloyed iron aluminides. Corros Sci. 2006; 48: 1059–1074. doi: 10.1016/j.corsci.2005.06.008
17.
ParkCJKwonHS.Effects of aging at 475°C on corrosion properties of tungsten-containing duplex stainless steels. Corros Sci. 2002; 44: 2817–2830. doi: 10.1016/S0010-938X(02)00079-3
18.
OguzieEELiJLiuYThe effect of Cu addition on the electrochemical corrosion and passivation behavior of stainless steels. Electrochim Acta. 2010; 55: 5028–5035. doi: 10.1016/j.electacta.2010.04.015
19.
Igual MunozAGarcar AntonJGuinonJLThe effect of chromate in the corrosion behavior of duplex stainless steel in LiBr solutions. Corros Sci. 2006; 48: 4127–4151. doi: 10.1016/j.corsci.2006.03.009
20.
Vautrin-UICTalebAAtafiejJMesoscopic modelling of corrosion phenomena: coupling between electrochemical and mechanical processes, analysis of the deviation from the Faraday law. Electrochim Acta. 2007; 52: 5368–5376. doi: 10.1016/j.electacta.2007.02.051
21.
ZanbaAMeierAGreggBA.Electric potential distribution and short-range screening in nano porous TiO2 electrodes. J Phys Chem B. 1997; 101: 7985–7990. doi: 10.1021/jp971857u
22.
CabotPLGarridoJAPerezEEis study of heat-treated Al-Zn-Mg alloys in the passive and transpassive potential regions. Electrochim Acta. 1995; 40: 447–454. doi: 10.1016/0013-4686(94)00299-G
23.
MunozAIGarcia AntonJGuinonJLInhibition effect of chromate on the passivation and pitting corrosion of a duplex stainless steel in LiBr solutions using electrochemical techniques. Corros Sci. 2007; 49: 3200–3225. doi: 10.1016/j.corsci.2007.03.002
24.
LuoHDongCFLiXGThe electrochemical behavior of 2205 duplex stainless steel in alkaline solutions with different pH in the presence of chloride. Electrochim Acta. 2012; 64: 211–220. doi: 10.1016/j.electacta.2012.01.025
25.
BrugGJvan den EedenALGSluyters-RehhbachM.The analysis of electrode impedances complicated by the presence of a constant phase element. J Electroanal Chem. 1984; 176: 275–295. doi: 10.1016/S0022-0728(84)80324-1
26.
NicicIMacdonaldDD.The passivity of type 316L stainless steel in borate buffer solution. J Nucl Mater. 2008; 379: 54–58. doi: 10.1016/j.jnucmat.2008.06.014
27.
SikoraESikoraJMacdonaldDD.A new method for estimating the diffusivities of vacancies in passive films. Electrochim Acta. 1996; 41: 783–789. doi: 10.1016/0013-4686(95)00312-6
28.
SimoesAMPFerriraMGSRondotBStudy of passive film formed on AISI 304 stainless steel by impedance measurements and photo electro chemistry. J Electrochim Soc. 1990; 137: 82–87. doi: 10.1149/1.2086444
29.
Fernandez-DomeneRMBlasco-TamaritEGarcia-GarciaDMEffect of alloying elements on the electronic properties of thin passive films formed on carbon steel, ferritic and austenitic stainless steels in a highly concentrated LiBr solution. Thin Solid Films. 2014; 558: 252–258. doi: 10.1016/j.tsf.2014.03.042
30.
Fattah-alhosseuniASaatchiAGolozarMAThe passivity of AISI 316L stainless steel in 0.05 M H2SO4. J Appl Electrochim. 2010; 40: 457–461. doi: 10.1007/s10800-009-0016-y
31.
YangSMacdonaldDD.Theoretical and experimental studies of the pitting of type 316L stainless steel in borate buffer solution containing nitrate ion. Electrochim Acta. 2007; 52: 1871–1879. doi: 10.1016/j.electacta.2006.07.052
32.
ZhangYUrquidi-MacdonaldMGeorge EngelhardtRDevelopment of localized corrosion damage on low pressure turbine disks and blades: I. passivity. Electrochim Acta. 2012; 69: 1–11. doi: 10.1016/j.electacta.2012.01.022
33.
LuoHDongCFXiaoKCharacterization of passive film on 2205 duplex stainless steel in sodium thiosulphate solution. Appl Surf Sci.2011; 258: 631–639. doi: 10.1016/j.apsusc.2011.06.077
34.
AmeriJSouierTMalkiBEffect of the final annealing of cold rolled stainless steels sheets on the electronic properties and pit nucleation resistance of passive films. Corros Sci. 2008; 50: 431–435. doi: 10.1016/j.corsci.2007.08.013
35.
HamadouLKadriABenbrahimN.Impedance investigation of thermally formed oxide films on AISI 304L stainless steel. Corros Sci. 2010; 52: 859–864. doi: 10.1016/j.corsci.2009.11.004
36.
Fattah-alhosseuniAVafaeinS.Influence of grain refinement on the electrochemical behavior of AISI 430 ferritic stainless steel in an alkaline solution. Appl Surf Sci. 2016; 360: 921–928. doi: 10.1016/j.apsusc.2015.11.085
37.
Fattah-alhosseuniAVafaeinS.Comparison of electrochemical behavior between coarse-grained and fine-grained AISI 430 ferritic stainless steel by Mott–Schottky analysis and EIS measurements. J Alloy Compd. 2015; 639: 301–307. doi: 10.1016/j.jallcom.2015.03.142
38.
LiLDongCFXiaoKEffect of pH on pitting corrosion of stainless steel welds in alkaline salt water. Constr Build Mater. 2014; 68: 709–715. doi: 10.1016/j.conbuildmat.2014.06.090
39.
Fattah-alhosseuniAGolozarMASaatchiAEffect of solution concentration on semiconducting properties of passive films formed on austenitic stainless steels. Corros Sci. 2010; 52: 205–209. doi: 10.1016/j.corsci.2009.09.003
40.
ChoEAhnSKwonH.Effects of EDTA on the electronic properties of passive film on Fe–20Cr in pH 8.5 buffer solution. Electrochim Acta. 2005; 50: 3383–3389. doi: 10.1016/j.electacta.2004.12.012
41.
GoodletGFatySCardosoSThe electronic properties of sputtered chromium and iron oxide films. Corros Sci. 2004; 46: 1479–1499. doi: 10.1016/j.corsci.2003.09.022
