Three hundred and four stainless steel and 6061 aluminium alloy samples were exposed to different concentrations of smoke generated by polyvinyl chloride in high humidity. The corrosion kinetics of 304 stainless steel and 6061 aluminium alloy under smoke were found to obey the power function and a linear rule, respectively. Pitting corrosion in smoke became increasingly obvious with exposure time. Surface morphology and chemical compositions of corrosion products were analysed by scanning electron microscope, energy dispersive spectroscopy and X-ray photoelectron spectroscopy. Possible corrosion mechanisms were proposed and compared. All the analysis helps to provide basic information for the determination of smoke damage and timely rescue after fire.
Commission CIR. Selected insurance claims settling cases for major disasters and accidents of 2013. China Financial Publishing House; 2015. Chinese.
2.
PeacockRDClearyTGRenekePAA literature review of the effects of smoke from a fire on electrical equipment. Gaithersburg (MD): National Institute of Standards and Technology; 2012. NUGEG/CR-7123.
3.
TewarsonA.Characterization of the fire environments in central offices of the telecommunications industry. Fire Mater. 2003 May–Jun; 27 (3): 131–149. DOI: 10.1002/Fam.821. PubMed PMID: WOS:000184444900003; English.
4.
TanakaTJ.Measurements of the effects of smoke on active circuits. Fire Mater. 1999 May–Jun; 23 (3): 103–108. DOI: 10.1002/(Sici)1099-1018(199905/06)23:3<103::Aid-Fam670>3.0.Co;2-P. PubMed PMID: WOS:000082873500001; English.
5.
HirschlerMMSmithGF.Corrosive effects of smoke on metal surfaces. Fire Saf J. 1989; 15 (1): 57–93. doi: 10.1016/0379-7112(89)90048-9
6.
ReagorBT.Smoke corrosivity: generation, impact, detection, and protection. J Fire Sci. 1992; 10 (2): 169–179. doi: 10.1177/073490419201000206
7.
NewmanJSSuPYeeGGDevelopment of smoke corrosion and leakage current damage functions. Fire Saf J. 2013 Oct; 61: 92–99. DOI: 10.1016/j.firesaf.2013.08.016. PubMed PMID: WOS:000327365700010; English.
8.
TewarsonA.Nonthermal fire damage. J Fire Sci. 1992; 10 (3): 188–242. doi: 10.1177/073490419201000302
9.
PowellEAZinnBT.Corrosion of metals exposed to combustion products generated by burning electrical power cables. J Fire Sci. 1989; 7 (3): 145–172. doi: 10.1177/073490418900700301
10.
TewarsonAKhanMSteciakJ.Combustibility of electrical wire and cable for rail rapid transit systems. Volume 1: flammability. DTIC Document; 1983.
11.
PattonJS.Fire and smoke corrosivity of metals. J Fire Sci. 1991 Mar–Apr; 9 (2): 149–161. DOI: 10.1177/073490419100900204. PubMed PMID: WOS:A1991GV59600004; English.
12.
JG Jr BKesselSLRogersCE.Corrosivity test methods for polymeric materials. Part 3 – modified DIN test method. J Fire Sci. 1992; 12 (2): 155–174.
13.
KesselSLRogersCEBennettJG.JrCorrosivity test methods for polymeric materials part 5 – A comparison of four test methods. J Fire Sci. 1993; 12 (2): 196–233. doi: 10.1177/073490419401200205
14.
MichalJ.Toxicity of pyrolysis and combustion products of poly-(vinyl chloride). Fire Mater. 1976; 1 (2): 57–62. doi: 10.1002/fam.810010205
15.
HuggettCLevinBC.Toxicity of the pyrolysis and combustion products of poly (vinyl chlorides): a literature assessment. Fire Mater. 1987; 11 (3): 131–142. doi: 10.1002/fam.810110303
16.
NewmanJSuPYeeG.Smoke deposition velocity in industrial fire environments. Fire Saf Sci. 2011; 10: 655–668. doi: 10.3801/iafss.fss.10-655
17.
ForslundMLeygrafC.A quartz crystal microbalance probe developed for outdoor in situ atmospheric corrosivity monitoring. J Electrochem Soc. 1996; 143 (3): 839–844. doi: 10.1149/1.1836546
LuCSLewisO.Investigation of film-thickness determination by oscillating quartz resonators with large mass load. J Appl Phys. 1972; 43 (11): 4385–4390. doi: 10.1063/1.1660931
20.
LuoHLiXGDongCFDegradation of austenite stainless steel by atmospheric exposure in tropical marine environment. Corros Eng Sci Technol. 2013; 48 (3): 221–229. doi: 10.1179/1743278212Y.0000000070
21.
WangYWangWLiuYStudy of localized corrosion of 304 stainless steel under chloride solution droplets using the wire beam electrode. Corros Sci. 2011; 53 (9): 2963–2968. doi: 10.1016/j.corsci.2011.05.051
22.
TanBJKlabundeKJSherwoodPM.X-ray photoelectron spectroscopy studies of solvated metal atom dispersed catalysts. Monometallic iron and bimetallic iron-cobalt particles on alumina. Chem Mater. 1990; 2 (2): 186–191. doi: 10.1021/cm00008a021
23.
GrosvenorAPKobeBABiesingerMCInvestigation of multiplet splitting of Fe 2p XPS spectra and bonding in iron compounds. Surf Interface Anal. 2004; 36 (12): 1564–1574. doi: 10.1002/sia.1984
24.
MarcusPGrimalJ.The anodic dissolution and passivation of NiCrFe alloys studied by ESCA. Corros Sci. 1992; 33 (5): 805–814. doi: 10.1016/0010-938X(92)90113-H
25.
SleighCPijpersAPJaspersAOn the determination of atomic charge via ESCA including application to organometallics. J Electron Spectrosc Relat Phenom. 1996; 77 (1): 41–57. doi: 10.1016/0368-2048(95)02392-5
26.
KishiKIkedaS.X-ray photoelectron spectroscopic study of the reaction of evaporated metal films with chlorine gas. J Phys Chem. 1974; 78 (2): 107–112. doi: 10.1021/j100595a005
27.
HasegawaMOsawaM.Anomalous corrosion of hydrogen-containing ferritic steels in aqueous acid solution. Corrosion. 1983; 39 (4): 115–120. doi: 10.5006/1.3580826
28.
YangQLuoJ.Effects of hydrogen and tensile stress on the breakdown of passive films on type 304 stainless steel. Electrochim Acta. 2001; 46 (6): 851–859. doi: 10.1016/S0013-4686(00)00661-7
29.
Abd El MeguidEAMahmoudNAAbd El RehimSA.The effect of some sulphur compounds on the pitting corrosion of type 304 stainless steel. Mater Chem Phys. 2000; 63 (1): 67–74. doi: 10.1016/S0254-0584(99)00206-0
30.
El-EgamySBadawayW.Passivity and passivity breakdown of 304 stainless steel in alkaline sodium sulphate solutions. J Appl Electrochem. 2004; 34 (11): 1153–1158. doi: 10.1007/s10800-004-1709-x
WangZMaTHanWCorrosion behavior on aluminum alloy LY12 in simulated atmospheric corrosion process. Trans Nonferrous Met Soc China. 2007; 17 (2): 326–334. doi: 10.1016/s1003-6326(07)60093-4
33.
De la FuenteDOtero-HuertaEMorcilloM.Studies of long-term weathering of aluminium in the atmosphere. Corros Sci. 2007; 49 (7): 3134–3148. doi: 10.1016/j.corsci.2007.01.006
34.
KloproggeJTDuongLVWoodBJXPS study of the major minerals in bauxite: gibbsite, bayerite and (pseudo-) boehmite. J Colloid Interface Sci. 2006; 296 (2): 572–576. doi: 10.1016/j.jcis.2005.09.054
35.
NatishanPO'GradyW.Chloride ion interactions with oxide-covered aluminum leading to pitting corrosion: a review. J Electrochem Soc. 2014; 161 (9): C421–C432. doi: 10.1149/2.1011409jes
36.
ForoulisZThubrikarM.On the kinetics of the breakdown of passivity of preanodized aluminum by chloride ions. J Electrochem Soc. 1975; 122 (10): 1296–1301. doi: 10.1149/1.2134003
37.
TurnerRRossG.Conditions in solution during the formation of gibbsite in dilute Al salt solutions. 4. Effect of Cl concentration and temperature and a proposed mechanism for gibbsite formation. Can J Chem. 1970; 48 (5): 723–729. doi: 10.1139/v70-119
38.
MorcilloMFeliuS.Mapas de España de corrosividad atmosférica. Madrid: CYTED; 1993. p. 3–6.
FoleyRNguyenT.The chemical nature of aluminum corrosion v. energy transfer in aluminum dissolution. J Electrochem Soc. 1982; 129 (3): 464–467. doi: 10.1149/1.2123881
