Stray current control by a new approach based on current monitoring on a potential probe

Abstract

To control stray current interference due to DC transit systems, cathodic protection at the so-called constant potential condition is used. Pipeline potential is continuously measured by means of a fixed reference electrode, and the measured value is used to control dynamically the feeder in order to match the protection condition. An accurate analysis of this technique reveals that during interference what is maintained constant is the IR drop in soil rather than the true potential of the structure. A new approach was investigated: the innovation consists of the use of the current, rather than the potential, to control the feeder on the basis of an effective range of the current the probe should receive. Laboratory tests confirmed the feasibility of such an approach. Modelling and test results are presented and discussed.

Keywords

Cathodic protection ohmic drop monitoring potential probe stray current

Get full access to this article

View all access options for this article.

References

EN12954. Cathodic protection of buried or immersed metallic structures – General principles and application for pipelines. Brussels: European Committee for Standardization (CEN); 2001

NACE RP0169. Control of external corrosion on underground or submerged metallic piping systems. Houston (TX): NACE International; 2013.

Peabody

. Control of pipeline corrosion. Houston (TX): NACE International; 1967.

Szeliga

editor. Stray current corrosion, the past, present, and future of rail transit systems. Houston (TX): NACE International; 1994

Lazzari

Pedeferri

. Cathodic protection. Milan, Italy: Polipress; 2006.

Wallén

Linder

. Ohmic potential drop in cathodic protection of buried structures: evaluation of some measuring methods. Brit Corrosion J. 1973; 8: 7–14. doi: 10.1179/000705973798322558

Huo

Tan

MYJ

Forsyth

. Investigating effects of potential excursions and pH variations on cathodic protection using new electrochemical testing cells. Corros Eng Sci Technol. 2016; 51: 171–178. doi: 10.1179/1743278215Y.0000000044

Ojeda

Lázaro

Benito

. Assessment of cathodic protection by close interval survey incorporating the instant off potential method. Corros Eng Sci Technol. 2016; 51: 241–247. doi: 10.1179/1743278215Y.0000000041

Brenna

Lazzari

Ormellese

. Laboratory tests on a potential probe with zinc reference electrode for remote monitoring system of cathodic protection. La Metall Ital. 2010; 102: 13–19.

10.

Brenna

Lazzari

Ormellese

. Potential probe with Zn embedded reference elctrode for monitoring cathodic protection. La Metall Ital. 2012; 104: 5–11.

11.

NACE SP0104. The use of coupons for cathodic protection monitoring applications. Houston (TX): Nace International; 2014.

12.

EN 13509. Cathodic protection measurement techniques. Brussels: European Committee for Standardization (CEN); 2003.

13.

von Baeckmann

Prinz

. Electrochemical measuring techniques of stray current influenced pipelines, Dechema – monographs, vol. 101, p. 65-177. VCH Verlagsgesellschaft; 1986.

14.

Bazzoni

Lazzari

. The lateral gradient technique for potential measurements in presence of stray current. Proc. Int. Conf. Corrosion/96, Paper no. 96202. Houston (TX): NACE International; 1996.

15.

Lazzari

Bazzoni

. Test field results of a new probe for IR drop free potential measurement. CeoCor Int. Conf. Giardini Naxos, Italy, May 13-16, 2003.

16.

Lazzari

Ormellese

Bazzoni

. Field test results of CP coupons for remote CP monitoring. Proc. Int. Conf. CORROSION/05, Paper 05041. Houston (TX): NACE International; 2005.

17.

Probe for measurement of the true potential of buried structures. Italian Patent application no. MI2001A 001260, Milano. Inventor: M. Ormellese, L. Lazzari, P. Pedeferri; 2001.