Corrosion behaviour of 304LN activated tungsten inert gas and flux-cored arc weld metals

Abstract

Activated tungsten inert gas (A-TIG) and flux-cored arc (FCA) weld metals were prepared using 304LN stainless steel plate. The weld metals were thermally aged at 923, 973 and 1023 K for 100 h to study the decomposition of initial δ-ferrite in A-TIG (∼10 ferrite number (FN)) and FCA (∼5 FN) weld metals into secondary phases like M₂₃C₆ carbides, χ and σ. Ferrite number is the measurement of δ-ferrite based on the principle of magnetic property using ferritescope. Preliminary microstructural studies revealed the formation of carbides in FCA weld metals aged at 923 K for 100 h, which was correlated with higher carbon content (0.04 wt-%), and also ageing at higher temperature transformed δ-ferrite into χ/σ phases. However, A-TIG weld metals showed the transformation of δ-ferrite mainly into χ/σ phases. The δ-ferrite transformation kinetics was found to be sluggish in A-TIG weld metals compared to FCA weld metals. This difference was attributed to the difference in the carbon contents of A-TIG and FCA welds. Activated tungsten inert gas weld metals showed better uniform and pitting corrosion resistance compared to FCA weld metals in as-deposited and thermally aged conditions. Presence of higher amount of initial δ-ferrite content in A-TIG weld metal helped diffusion of minor alloying elements like sulphur and phosphorous into it, thereby reducing their microsegregation at the δ/γ interface boundaries and subsequent pitting corrosion attack. Thus, A-TIG welding process was found to be superior compared to FCA welding process.