Nucleating agents cause an increase in crystallization temperature, making the production of highly oriented films much more difficult. In this study, a nucleating system composed of 1,3:2,4-bis(3,4-dimethylbenzylidene) sorbitol (DMDBS) and tetrasilanolphenyl silsesquioxane (phPOSS) was used to modify isotactic polypropylene (iPP). Oriented films characterised by different draw drown ratios (4.8, 9.7, 14.5) were prepared and analysed. Their mechanical properties, coefficient of friction, thermal properties, and structure as well as optical properties such as gloss, haze, and transparency, were also determined. The macromolecular orientation of films was tested by polarised light Fourier transform infrared spectroscopy. The proposed nucleating system provides films with superior mechanical and optical properties, which are accompanied by high orientation ability. The application of DMDBS and phPOSS allowed a 26% increase in penetration load at break and Young modulus by 70% compared to iPP. It can be assumed that DMDBS/phPOSS system is an efficient modifier for polypropylene film production.
LiuJ, PanY.Nucleation and crystallization behavior of isotactic polypropylene induced by zinc tetrahydrophthalate. Polym Bull. 2021; 79: 4563–4580. DOI: 10.1007/s00289-021-03717-7
3.
BalkaevD, NeklyudovV, StarshinovaV, Novel nucleating agents for polypropylene and modifier of its physical-mechanical properties. Mater Today Commun. 2021; 26: 101783. DOI: 10.1016/j.mtcomm.2020.101783
4.
IvanovAN, KaluginaEV.The problem of nucleation of polypropylene (review). Int Polym Sci Technol. 2008; 35: 11–17. DOI: 10.1177/0307174X0803500203
5.
PauksztaD, SzostakM, BednarekWH, The structure of isotactic polypropylene in composites filled with lignocellulosic material. J Nat Fibers. 2019; 16: 471–483. DOI: 10.1080/15440478.2018.1425650
6.
Al-SamhanM, Al-AttarF, Al-FadhliJ, The influence of nano CaCO3 on nucleation and interface of PP nano composite: matrix processability and impact resistance. Polymers (Basel). 2021; 13: 1389. DOI: 10.3390/polym13091389
7.
PapageorgiouGZ, AchiliasDS, BikiarisDN, Crystallization kinetics and nucleation activity of filler in polypropylene/surface-treated SiO2 nanocomposites. Thermochim Acta. 2005; 427: 117–128. DOI: 10.1016/j.tca.2004.09.001
8.
BednarekWH, CiesielczykF, OdalanowskaM, Effect of lanthanum-modified magnesium silicate on isotactic polypropylene crystallization in composite materials during shear flow. Polym Eng Sci. 2020; 60: 1856–1865. DOI: 10.1002/pen.25422
9.
MenyhárdA, GahleitnerM, VargaJ, The influence of nucleus density on optical properties in nucleated isotactic polypropylene. Eur Polym J. 2009; 45: 3138–3148. DOI: 10.1016/j.eurpolymj.2009.08.006
10.
KobayashiT, HashimotoT.Development of self-assembling nucleators for highly transparent semi-crystalline polypropylene. Bull Chem Soc Jpn. 2005; 78: 218–235. DOI: 10.1246/bcsj.78.218
11.
SimankeAG, de AzeredoAP, de LemosC, Influence of nucleating agent on the crystallization kinetics and morphology of polypropylene. Polímeros. 2016; 26: 152–160. DOI: 10.1590/0104-1428.2053
12.
NiuL, BaiG, SongJ.1,3:2,4-di-(3,4-dimethyl)benzylidene sorbitol organogels used as phase change materials: solvent effects on structure, leakage and thermal performance. RSC Adv. 2015; 5: 21733–21739. DOI: 10.1039/C4RA15420G
NiemczykA, DziubekK, Sacher-MajewskaB, Study of thermal properties of polyethylene and polypropylene nanocomposites with long alkyl chain-substituted POSS fillers. J Therm Anal Calorim. 2016; 125: 1287–1299. DOI: 10.1007/s10973-016-5497-4
16.
Czarnecka-KomorowskaD, SterzynskiT, DutkiewiczM.Polyoxymethylene/polyhedral oligomeric silsesquioxane composites: processing, crystallization, morphology and thermo-mechanical behavior. Int Polym Process. 2016; 31: 598–606. DOI: 10.3139/217.3243
GralaM, BartczakZ, PracellaM.Morphology and mechanical properties of polypropylene-POSS hybrid nanocomposites obtained by reactive blending. Polym Compos. 2013; 34: 929–941. DOI: 10.1002/pc.22499
19.
ZhangW, CaminoG, YangR.Polymer/polyhedral oligomeric silsesquioxane (POSS) nanocomposites: an overview of fire retardance. Prog Polym Sci. 2017; 67: 77–125. DOI: 10.1016/j.progpolymsci.2016.09.011
20.
BrząkalskiD, PrzekopRE, SztorchB, Why POSS-type compounds should be considered nanomodifiers, not nanofillers—a polypropylene blends case study. Polymers (Basel). 2021; 13: 2124. DOI: 10.3390/polym13132124
21.
ChenJ-H, YaoB-X, SuW-B, Isothermal crystallization behavior of isotactic polypropylene blended with small loading of polyhedral oligomeric silsesquioxane. Polymer (Guildf). 2007; 48: 1756–1769. DOI: 10.1016/j.polymer.2007.01.010
22.
BarczewskiM, Czarnecka-KomorowskaD, AndrzejewskiJ, Processing properties of thermoplastic polymers modified by polyhedral oligomeric silsesquioxanes (POSS). Polimery. 2013; 58: 805–815. DOI: 10.14314/polimery.2013.805
RoyS, LeeBJ, KakishZM, Exploiting POSS–sorbitol interactions: issues of reinforcement of isotactic polypropylene spun fibers. Macromolecules. 2012; 45: 2420–2433. DOI: 10.1021/ma202783p
25.
RoyS, SciontiV, JanaSC, Sorbitol–POSS interactions on development of isotactic polypropylene composites. Macromolecules. 2011; 44: 8064–8079. DOI: 10.1021/ma201595j
26.
ChenG, FengB, ZhuK, Effect of polyhedral oligomeric silsesquioxane and sorbitol on properties of isotactic polypropylene. Chem Res Chinese Univ. 2015; 31: 303–307. DOI: 10.1007/s40242-015-4394-x
27.
OleksyM, Szwarc-RzepkaK, HeneczkowskiM, Epoxy resin composite based on functional hybrid fillers. Materials (Basel). 2014; 7: 6064–6091. DOI: 10.3390/ma7086064
28.
BarczewskiM, Dobrzyńska-MizeraM, DudziecB, Influence of a sorbitol-based nucleating agent modified with silsesquioxanes on the non-isothermal crystallization of isotactic polypropylene. J Appl Polym Sci. 2014; 131. DOI: 10.1002/app.40131
29.
BarczewskiM, DudziecB, Dobrzyńska-MizeraM, Synthesis and influence of sodium benzoate silsesquioxane based nucleating agent on thermal and mechanical properties of isotactic polypropylene. J Macromol Sci A. 2014; 51: 907–913. DOI: 10.1080/10601325.2014.953375
ZhangX, ZhaoS, MengX, The mechanical properties, crystallization and rheological behavior of isotactic polypropylene with nucleating agent supported on polyhedral oligomeric silsesquioxanes (POSS). J Polym Res. 2020; 27: 303. DOI: 10.1007/s10965-020-02260-9
32.
Dobrzyńska-MizeraM, BarczewskiM, DudziecB, Influence of the cooling rate on the non-isothermal crystallization of isotactic polypropylene modified with sorbitol derivative and silsesquioxane. Polimery. 2013; 58: 920–923. DOI: 10.14314/polimery.2013.920
33.
BarczewskiM, MysiukiewiczO, AndrzejewskiJ, The inhibiting effect of basalt powder on crystallization behavior and the structure-property relationship of α-nucleated polypropylene composites. Polym Test. 2021; 103: 107372. DOI: 10.1016/j.polymertesting.2021.107372
34.
BalzanoL, RastogiS, PetersGWM.Flow induced crystallization in isotactic polypropylene–1,3:2,4-Bis(3,4-dimethylbenzylidene)sorbitol blends: implications on morphology of shear and phase separation. Macromolecules. 2008; 41: 399–408. DOI: 10.1021/ma071460g
35.
HorváthZ, GyarmatiB, MenyhárdA, The role of solubility and critical temperatures for the efficiency of sorbitol clarifiers in polypropylene. RSC Adv. 2014; 4: 19737–19745. DOI: 10.1039/C4RA01917B
36.
JakubowskaP, SterzyńskiT, KrólikowskiB.The properties of polyolefins modified with PET powder. J Appl Polym Sci. 2008; 109: 1993–1999. DOI: 10.1002/app.27704
37.
Dobrzyńska-MizeraM, DutkiewiczM, SterzyńskiT, Isotactic polypropylene modified with sorbitol-based derivative and siloxane-silsesquioxane resin. Eur Polym J. 2016; 85: 62–71. DOI: 10.1016/j.eurpolymj.2016.09.049
38.
TabatabaeiSH, CarreauPJ, AjjiA.Effect of processing on the crystalline orientation, morphology, and mechanical properties of polypropylene cast films and microporous membrane formation. Polymer (Guildf). 2009; 50: 4228–4240. DOI: 10.1016/j.polymer.2009.06.071
39.
KościuszkoA, SterzyńskiT, PiszczekK.Calorimetric investigations of oriented polypropylene tapes and self-reinforced composites. Macromol Symp. 2016; 365: 151–156. DOI: 10.1002/masy.201650021
40.
TabatabaeiSH, CarreauPJ, AjjiA.Structure and properties of MDO stretched polypropylene. Polymer (Guildf). 2009; 50: 3981–3989. DOI: 10.1016/j.polymer.2009.06.059
41.
BaiH, WangY, LiuL, Nonisothermal crystallization behaviors of polypropylene with α/β nucleating agents. J Polym Sci B Polym Phys. 2008; 46: 1853–1867. DOI: 10.1002/polb.21520
AniunohKK, HarrisonyGM.Experimental investigation of film formation: film casting. J Plast Film Sheeting. 2006; 22: 177–192. DOI: 10.1177/8756087906067323
44.
GuadagnoL, NaddeoC, MeilleVSV.Temperature and orientation induced polymorphic behavior of syndiotactic polypropylene. Macromolecules. 2005; 38: 8755–8764. DOI: 10.1021/ma050397x
45.
LambertiG, BrucatoV.Real-time orientation and crystallinity measurements during the isotactic polypropylene film-casting process. J Polym Sci B Polym Phys. 2003; 41: 998–1008. DOI: 10.1002/polb.10411
ZhangX, XieF, PenZ, Effect of nucleating agent on the structure and properties of polypropylene/poly(ethylene–octene) blends. Eur Polym J. 2002; 38: 1–6. DOI: 10.1016/S0014-3057(01)00182-3
48.
ShepardTA, DelsorboCR, LouthRM, Self-organization and polyolefin nucleation efficacy of 1,3:2,4-di-p-methylbenzylidene sorbitol. J Polym Sci B Polym Phys. 1997; 35: 2617–2628. DOI: 10.1002/(SICI)1099-0488(19971130)35:16<2617::AID-POLB5>3.0.CO;2-M
49.
BaiH, WangY, SongB, Synergistic toughening effects of nucleating agent and ethylene–octene copolymer on polypropylene. J Appl Polym Sci. 2008; 108: 3270–3280. DOI: 10.1002/app.27980
50.
AboulfarajM, G'SellC, UlrichB, In situ observation of the plastic deformation of polypropylene spherulites under uniaxial tension and simple shear in the scanning electron microscope. Polymer (Guildf). 1995; 36: 731–742. DOI: 10.1016/0032-3861(95)93102-R
ShankarS, RhimJ-W, WonK.Preparation of poly(lactide)/lignin/silver nanoparticles composite films with UV light barrier and antibacterial properties. Int J Biol Macromol. 2018; 107: 1724–1731. DOI: 10.1016/j.ijbiomac.2017.10.038
53.
HorváthZ, MenyhárdA, DoshevP, Effect of the molecular structure of the polymer and nucleation on the optical properties of polypropylene homo- and copolymers. ACS Appl Mater Interfaces. 2014; 6: 7456–7463. DOI: 10.1021/am5008535
LjevakI, ZjakićI, BanicD.The variability of dynamic coefficient of friction material in flexible packaging. Acta Graph. 2018; 29: 31–38.
56.
SikoraJW, MajewskiŁ, PuszkaA.Modern biodegradable plastics—processing and properties part II. Materials (Basel). 2021; 14: 2523. DOI: 10.3390/ma14102523
57.
JakubowskaP, KlozińskiA.Wpływ technik homogenizacji na właściwości folii papieropodobnych. Przetwórstwo Tworzyw. 2013; 153: 182–186.
58.
FarrisS, IntrozziL, PiergiovanniL.Evaluation of a bio-coating as a solution to improve barrier, friction and optical properties of plastic films. Packag Technol Sci. 2009; 22: 69–83. DOI: 10.1002/pts.826
