Graphene-based elastomer composites with a segregated structure were prepared by electrostatic self-assembly. The morphology and microstructures of the composites were characterised by scanning electron microscope (SEM) and transmission electrical microscope (TEM). The segregated network leads to a low gas permeability coefficient for BIIR composites. With the incorporation as low as 0.4 wt-% GTA-GO, the helium permeability coefficient decreased about 63% when compared with that of neat BIIR. The tensile strength and percentage elongation increased with an increase in the GTA-GO content. This is attributed to the complete exfoliation, uniform dispersion and the segregated structure of GTA-GO in the BIIR matrix. These results demonstrate that such electrostatic self-assembly method between latex and sheet-fillers is an effective strategy to design and produce polymeric nanocomposites with good gas barrier properties. The results will effectively promote the application of barrier polymer in the production of protective clothing, gas storage devices and coatings.
LiuX, WangLY, ZhaoLF, Research progress of graphene-based rubber nanocomposites. Polym Compos. 2016; 4 ( 39 ): 1006–1022.
5.
ParkWB, BandyopadhyayP, NguyenTT, Effect of high molecular weight polyethyleneimine functionalized graphene oxide coated polyethylene terephthalate film on the hydrogen gas barrier properties. Compos B Eng. 2016; 106: 316–323.
6.
SainsburyT, GnaniahS, SpencerSJ, Extreme mechanical reinforcement in graphene oxide based thin-film nanocomposites via covalently tailored nanofiller matrix compatibilization. Carbon. 2017; 114: 367–376.
7.
ZhanY, LavorgnaM, BuonocoreG, Enhancing electrical conductivity of rubber composites by constructing interconnected network of self-assembled graphene with latex mixing. J Mater Chem. 2012; 22 ( 21 ): 10464–10468.
8.
WuXD, LuCH, XuHY, Biotemplate synthesis of polyaniline@cellulose nanowhiskers/natural rubber nanocomposites with 3D hierarchical multiscale structure and improved electrical conductivity. ACS Appl Mater Interfaces. 2014; 6 ( 23 ): 21078–21085.
9.
GuanY, MeyersKP, MendonSK, Ecofriendly fabrication of modified graphene oxide latex nanocomposites with high oxygen barrier performance. ACS Appl Mater Interfaces. 2016; 8 ( 48 ): 33210–33220.
10.
LinY, DongX, LiuS, Graphene-elastomer composites with segregated nanostructured network for liquid and strain sensing application. ACS Appl Mater Interfaces. 2016; 8 ( 36 ): 24143–24151.
11.
LinY, LiuS, PengJ, Constructing a segregated graphene network in rubber composites towards improved electrically conductive and barrier properties. Compos Sci Technol. 2016; 131: 40–47.
12.
LinY, LiuS, LiuL.A new approach to construct three dimensional segregated graphene structures in rubber composites for enhanced conductive, mechanical and barrier properties. J Mater Chem C. 2016; 4 ( 12 ): 2353–2358.
13.
HeF, MensitieriG, LavorgnaM, Tailoring gas permeation and dielectric properties of bromobutyl rubber – graphene oxide nanocomposites by inducing an ordered nanofiller microstructure. Compos B Eng. 2016, 11:361–368.
YunS-W, GongM-S.Preparation of flexible resistive micro-humidity sensors using quaternary ammonium salt-modified graphene oxide and their humidity-sensing properties. Macromol Res. 2014; 22 ( 10 ): 1043–1049.
16.
ChenH, LiY, WangS, Highly ordered structured montmorillonite/brominated butyl rubber nanocomposites: Dramatic enhancement of the gas barrier properties by an external magnetic field. J Membr. Sci. 2018, 546: 22–30.
17.
StankovichS, DikinDA, PinerRD, Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide. Carbon. 2007; 45 ( 7 ): 1558–1565.
18.
KonnolaR, JojiJ, ParameswaranpillaiJ, Structure and thermo-mechanical properties of CTBN-grafted-GO modified epoxy/DDS composites. RSC Adv. 2015; 5 ( 76 ): 61775–61786.
19.
GuoHL, WangXF, QianQY, A Green approach to the synthesis of graphene nanosheets. Acs Nano. 2009; 3 ( 9 ): 2653.
20.
YeX, QinX, YanX, Π–π conjugations improve the long-term antibacterial properties of graphene oxide/quaternary ammonium salt nanocomposites. Chem Eng J. 2016, 304: 873–881.
21.
YeX, FengJ, ZhangJ, Controlled release and long-term antibacterial activity of reduced graphene oxide/quaternary ammonium salt nanocomposites prepared by non-covalent modification. Colloids Surf. B. 2017, 149: 322–329.
22.
MalitestaC, LositoI, SabbatiniL, New findings on polypyrrole chemical structure by XPS coupled to chemical derivatization labelling. J. Electron Spectros Relat Phenomena. 1995; 76 ( 95 ): 629–634.
23.
WangYS, ShaoY, MatsonDW, Nitrogen-doped graphene and its application in electrochemical biosensing. Acs Nano. 2010; 4 ( 4 ): 1790–1798.
24.
MinB, YooHJS, YoonHW, Graphene and graphene oxide and their uses in barrier polymers. J Appl Polym Sci2014; 131 ( 1 ): 1–23.
25.
HouY, WangD, ZhangX-M, Positive piezoresistive behavior of electrically conductive alkyl-functionalized graphene/polydimethylsilicone nanocomposites. J Mater Chem C. 2013; 1 ( 3 ): 515–521.
26.
RoyXTS, DasT, ZhangL, Enhanced molecular level dispersion and interface bonding at low loading of modified graphene oxide to fabricate super Nylon12 composites. ACS Appl Mater Interfaces. 2015; 7 ( 5 ): 3142–3151.
27.
KangH, ZuoK, WangZ, Using a green method to develop graphene oxide/elastomers nanocomposites with combination of high barrier and mechanical performance. Compos Sci Technol. 2014; 92: 1–8.
