Polyolefin thermoplastic elastomers (POEs) are a class of thermoplastic elastomer (TPE) that can be easily processed. POEs have broad applications from automobiles to footwear and it is desirable to be able to alter the microstructure and properties. In this work, a systematic study of how blending and thermal processing of POEs affects mechanical and thermal properties is undertaken. Ethylene-octene copolymer POEs with different degrees of crystallinity are blended, compounded, and moulded and then slow cooled, quenched, or annealed. Differential scanning calorimetry (DSC) results show that the blends are immiscible and that quenching suppresses crystallinity while annealing thickens crystals. More crystals of the same thickness or thicker crystals of the same amount in the blends result in a higher modulus, lower elastic recovery, and more residual strain or permanent deformation after tensile testing. Microstructural control will allow for the optimal design of elastomeric materials with anticipated properties.
HottaA, CochranE, RuokolainenJ, Semicrystalline thermoplastic elastomeric polyolefins: advances through catalyst development and macromolecular design. Proc Natl Acad Sci U S A. 2006 October 17; 103(42):15327–15332. doi: 10.1073/pnas.0602894103
8.
ParkHE, DealyJM, MarchandGR, Rheology and structure of molten, olefin multiblock copolymers. Macromolecules. 2010/08/24;43(16):6789–6799. doi: 10.1021/ma1012122
9.
LiT, PuJ-H, MaL-F, An extremely uniform dispersion of MWCNTs in olefin block copolymers significantly enhances electrical and mechanical performances [10.1039/C5PY01236H]. Polym Chem. 2015;6(40):7160–7170. doi: 10.1039/C5PY01236H
BatistiniA.New polyolefin plastomers and elastomers made with insite™ technology: structure - property relationship and benefits in flexible thermoplastic applications. Macromol Symp. 1995;100(1):137–142. doi: 10.1002/masy.19951000122
12.
BensasonS, MinickJ, MoetA, Classification of homogeneous ethylene-octene copolymers based on comonomer content. J Polym Sci, Part B: Polym Phys. 1996;34(7):1301–1315. doi: 10.1002/(SICI)1099-0488(199605)34:7<1301::AID-POLB12>3.0.CO;2-E
13.
SunY, FuL, WuZ, Structural evolution of ethylene–octene copolymers upon stretching and unloading. Macromolecules. 2013/02/12;46(3):971–976. doi: 10.1021/ma3020933
14.
PatelRM, HahnSF, EsneaultC, Processing and properties of polyolefin elastomers and fully hydrogenated styrenic block copolymer elastomers. Adv Mater. 2000;12(23):1813–1817. doi: 10.1002/1521-4095(200012)12:23<1813::AID-ADMA1813>3.0.CO;2-8
15.
MandelkernL.Crystallization of polymers. Vol. 2. Cambridge: Cambridge University Press; 2004.
16.
RobesonLM.Polymer blends: a comprehensive review. Munich: Hanser; 2007.
17.
HuSR, KyuT, SteinRS.Characterization and properties of polyethylene blends I. linear low-density polyethylene with high-density polyethylene. J Polym Sci, Part B: Polym Phys. 1987;25(1):71–87. doi: 10.1002/polb.1987.090250106
18.
KyuT, HuSR, SteinRS.Characterization and properties of polyethylene blends II. linear low-density with conventional low-density polyethylene. J Polym Sci, Part B: Polym Phys. 1987;25(1):89–103. doi: 10.1002/polb.1987.090250107
19.
MattiussiA, ForcucciF.Polyolefinic blends: recent applications and developments. In: MartuscelliE, PalumboR, KryszewskiM, editor. Polymer blends. New York: Plenum Press; 1980. p. 469–484.
NwabunmaD, KyuT.Polyolefin blends. Hoboken, NJ: John Wiley and Sons, Inc.; 2008.
24.
JoseS, ThomasS, BijuPK, Mechanical and dynamic mechanical properties of polyolefin blends: effect of blend ratio and copolymer monomer fraction on the compatibilisation efficiency of random copolymers. J Polym Res. 2013;20:303. doi: 10.1007/s10965-013-0303-5
MartuscelliE, PracellaM, AvellaM, Properties of polyethylene-polypropylene blends: crystallization behaviour. In: MartuscelliE, PalumboR, KryszewskiM, editor. Polymer blends. New York: Plenum Press; 1980. p. 49–69.
27.
JordanAM, KimK, SoetrisnoD, Role of crystallization on polyolefin interfaces: an improved outlook for polyolefin blends. Macromolecules. 2018/04/10;51(7):2506–2516. doi: 10.1021/acs.macromol.8b00206
28.
KrishnamoortiR, GraessleyWW, DeeGT, Pure component properties and mixing behavior in polyolefin blends. Macromolecules. 1996/01/01;29(1):367–376. doi: 10.1021/ma950754b
29.
DudowiczJ, FreedKF.Influence of monomer structure and interaction asymmetries on the miscibility and interfacial properties of polyolefin blends. Macromolecules. 1996/01/01;29(27):8960–8972. doi: 10.1021/ma961205o
30.
JeonHS, LeeJH, BalsaraNP, An experimental study of the thermodynamic properties of multicomponent polyolefin blends with ordered and disordered phases. Macromolecules. 1998/05/01;31(10):3340–3352. doi: 10.1021/ma9709720
31.
Luettmer-StrathmannJ, LipsonJEG.Miscibility of polyolefin blends. Macromolecules. 1999/02/01;32(4):1093–1102. doi: 10.1021/ma981478e
32.
ZhaoL, ChoiP.A Review of the miscibility of polyethylene blends. Mater Manuf Processes. 2006/04/01;21(2):135–142. doi: 10.1081/AMP-200068644
33.
TehJW, RudinA, KeungJC.A review of polyethylene–polypropylene blends and their compatibilization. Adv Polym Tech. 1994;13(1):1–23. doi: 10.1002/adv.1994.060130101
34.
BonnerJG, HopePS.Compatibilisation and reactive blending. In: FolkesMJ, HopePS, editor. Polymer blends and Alloys. New Delhi: Springer Science + Business Media Dordecht; 1993. p. 46–74.
35.
PlochockiAP.Development of industrial polyolefin blends using melt rheology data. Polymer Engineering & Science. 1982;22(17):1153–1165. doi: 10.1002/pen.760221716
TesarikovaA, MerinskaD, KalousJ, Ethylene-Octene copolymers/organoclay nanocomposites: preparation and properties. 2016;2016(6014064):1–13.
38.
SvobodaP.Influence of branching density in ethylene-octene copolymers on electron beam crosslinkability. Polymers (Basel). 2015;7:2522–2534. doi: 10.3390/polym7121530
39.
WunderlichB.Thermal analysis. San Diego: Academic Press; 1990.
40.
AndroschR.Melting and crystallization of poly(ethylene-co-octene) measured by modulated d.s.c. and temperature-resolved X-ray diffraction. Polymer (Guildf). 1999;40:2805–2812. doi: 10.1016/S0032-3861(98)00470-4
41.
MinickJ, MoetA, HiltnerA, Crystallization of very low density copolymers of ethylene with α-olefins. J Appl Polym Sci. 1995;58(8):1371–1384. doi: 10.1002/app.1995.070580819
42.
MinickJ, SehanobishK.Structural model of crosslinked thermoplsatic elastomers produced via INSITE* technology. SPE 54th ANTEC; 1996 May 5–9; Indianapolis, IN: Society of Plastics Engineers.
43.
TortorellaN, BeattyCL.Morphology and crystalline properties of impact-modified polypropylene blends. Polymer Engineering & Science. 2008;48:1476–1486. doi: 10.1002/pen.21102
44.
HaMH, KimBK.Thermal properties and crystallization behvior of polyolefin ternary blends. Polymer Engineering & Science. 2004;44(10):1858–1865. doi: 10.1002/pen.20187
