Natural fibre-reinforced polymer matrix composites are gaining increased attention among the researchers due to their low density, biodegradability, abundance, good mechanical properties, etc. Significant amount of research works can be found on the material characterisation of natural fibres like hemp, flax, sisal, kenaf, coir and jute and their composites based on the polymer matrices. Natural fibres are hydrophilic in nature and exhibit poor interfacial adhesion between fibre and matrix. Modification of the fibre surface by chemical methods, such as alkalisation, benzoylation and acetylation, has been used by researchers to improve the above-mentioned shortcomings. This review paper focuses on the effect of alkali treatment on the material properties of various natural fibres and their composites along with their water absorption behaviour.
ZhuJ, ZhuH, NjugunaJ, Recent development of flax fibres and their reinforced composites based on different polymeric matrices. Materials. 2013;6:5171–5198.
2.
CristaldiG, LatteriA, ReccaG, Composites based on natural fibre fabrics. Woven Fab Eng. 2010;17:317–342.
3.
KabirMM, WangH, AravinthanT, Effects of natural fibre surface on composite properties: A review. Proceedings of the 1st international postgraduate conference on engineering, designing and developing the built environment for sustainable wellbeing (eddBE2011); 2011. p. 94–99.
4.
KumarR, ObraiS, SharmaA. Chemical modifications of natural fiber for composite material. Pelagia Res Lib Der Chem Sin. 2011;2:219–228.
5.
YanL, ChouwN, HuangL, Effect of alkali treatment on microstructure and mechanical properties of coir fibres, coir fibre reinforced-polymer composites and reinforced-cementitious composites. Constr Build Mater.2016;112:168–182.
6.
PunyamurthyR, SampathkumarD, SrinivasaCV, Effect of alkali treatment on water absorption of single cellulosic abaca fiber. BioResources. 2012;7:3515–3524.
7.
VasquezJZ, PataludCRS, TarnatePMO, Effect of alkali treatment on the mechanical, physical, and thermal properties of sweet sorghum [Sorghum bicolor (L.) Moench] fibers. Philipp E-J Appl Res Dev. 2016;6::1–9.
8.
GuduriBR, SemosaH, MengYZ. Green composites from woven flax fiber and bio-copolyester. Proceedings of 17th ICCM International conferences on composite materials. Edinburgh (UK); 2009. 27–31.
9.
KarthikeyanA, BalamuruganK. Effect of alkali treatment and fiber length on impact behavior of coir fiber reinforced epoxy composites. J Sci Ind Res. 2012;71:627–631.
10.
KommulaVP, KanchireddyOR, ShuklaM, Study on Impact strength of untreated and alkali treated Napier grass fiber strands reinforced Epoxy composites. Int J Res Eng Technol. 2013;2(3):101–106.
11.
AcharyaSK, MishraP, MeharSK. Effect of surface treatment on the mechanical properties of bagasse fiber reinforced polymer composite. BioResources. 2011;6:3155–3165.
12.
WangB, TabilL, PanigrahiS. Effects of chemical treatments on mechanical and physical properties of flax fiber-reinforced composites. Sci Eng Compos Mater. 2008;15:43–58.
13.
LiuW, MohantyAK, DrzalL, Effects of alkali treatment on the structure, morphology and thermal properties of native grass fibers as reinforcements for polymer matrix composites. J Mater Sci. 2004;39:1051–1054.
14.
HosurM, MarojuH, JeelaniS. Comparison of effects of alkali treatment on flax fibre reinforced polyester and polyester-biopolymer blend resins. Polym Polym Compos. 2015;23:229–241.
15.
BachtiarD, SapuanSM, HamdanMM. Flexural properties of alkaline treated sugar palm fibre reinforced epoxy composites. Int J Auto Mech Eng. 2010;1:79–90.
16.
BisandaETN. The effect of alkali treatment on the adhesion characteristics of sisal fibres. Appl Compos Mater. 2000;7:331–339.
17.
AydınM, TozluH, KemalogluS, Effects of alkali treatment on the properties of short flax fiber–poly (lactic acid) eco-composites. J Polym Environ. 2011;19:11–17.
18.
LiuH, YouL, JinH, Influence of alkali treatment on the structure and properties of hemp fibers. Fibers Polym. 2013;14:389–395.
19.
SinhaE, RoutSK. Influence of fibre-surface treatment on structural, thermal and mechanical properties of jute fibre and its composite. Bull Mater Sci. 2009;32:65–76.
20.
SymingtonMC, David-WestOS, BanksWM, The effect of alkalisation on the mechanical properties of natural fibres. 13th European Conference on Composite Materials (EECM 13); 2008.
21.
KaushikVK, KumarA, KaliaS. Effect of mercerization and benzoyl peroxide treatment on morphology, thermal stability and crystallinity of sisal fibers. Int J Text Sci. 2012;1:101–105.
22.
FioreV, Di BellaG, ValenzaA. 2015. The effect of alkaline treatment on mechanical properties of kenaf fibers and their epoxy composites. Compos Part B: Eng. 68:14–21.
23.
ChalidM, PrabowoI. The effects of alkalization to the mechanical properties of the ijuk fiber reinforced PLA biocomposites. Int J Chem, Nucl, Mater Metall Eng. 2015;9:342–346.
24.
El-ShekeilY, SapuanS, KhalinaA, Effect of alkali treatment on mechanical and thermal properties of Kenaf fiber-reinforced thermoplastic polyurethane composite. J Therm Anal Calorim. 2012;109:1435–1443.
25.
PugliaD, MontiM, SantulliC, Effect of alkali and silane treatments on mechanical and thermal behavior of Phormium tenax fibers. Fibers Polym. 2013;14:423–427.
26.
ZhuJ, BrightonJ, ZhuH, Effect of alkali, esterification and silane surface treatments on properties of flax fibres. J Sci Res Rep. 2014;4:1–11.
27.
BorchaniKE, CarrotC, JaziriM. Untreated and alkali treated fibers from Alfa stem: effect of alkali treatment on structural, morphological and thermal features. Cellulose. 2015;22:1577–1589.
28.
RayD, SarkarBK, RanaA, Effect of alkali treated jute fibres on composite properties. Bull Mater Sci. 2001;24:129–135.
29.
FookLT, YatimJM. An experimental study on the effect of alkali treatment on properties of kenaf fiber for reinforced concrete elements. Int J Res Eng Technol. 2015;4:37–40.
30.
KarsliNG, AytacA. Properties of alkali treated short flax fiber reinforced poly (lactic acid)/polycarbonate composites. Fibers Polym. 2014;15:2607–2612.
HudaMS, DrzalLT, MohantyAK, Effect of chemical modifications of the pineapple leaf fiber surfaces on the interfacial and mechanical properties of laminated biocomposites. Compos Interface. 2008;15:169–191.
35.
RodríguezES, VázquezA. Alkali treatment of jute fabrics: influence on the processing conditions and the mechanical properties of their composites. The 8th international conference on flow processes in composite materials (FPCM8). Douai, France; 2006. p. 11–13.
36.
GarsideP, WyethP. Identification of cellulosic fibres by FTIR spectroscopy-thread and single fibre analysis by attenuated total reflectance. Stud Conserv. 2013;48:269–275.
37.
BenyahiaA, MerroucheA, RokbiM, KouadriZ.Study the effect of alkali treatment of natural fibers on the mechanical behavior of the composite unsaturated Polyester-fiber Alfa. 21ème Congrès Français de Mécanique Bordeaux, 26 au 30 août. 2013:1–6.
38.
FrenchAD, CintrónMS. Cellulose polymorphy, crystallite size, and the Segal crystallinity index. Cellulose. 2013;20:583–588.
39.
MwaikamboLY, AnsellMP. Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization. J Appl Polym Sci. 2002;84:2222–2234.
40.
CélinoA, FréourS, JacqueminF, The hygroscopic behavior of plant fibers: a review. Front Chem. 2013;1:1–12.
41.
MusanifIS, ThomasA. Effect of alkali treatments of physical and mechanical properties of coir fiber. Chem Mater Eng. 2015;3:23–28.
42.
MeheddeneM, HishamB, HadiA, Alkali Treatment of fan palm natural fibres for use in fibre reinforced concrete. Eur Sci J. 2014;10:186–194.
43.
KanchireddyOR, MuzendaE. 2014. Effect of fiber surface treatments on the tensile properties of polycarbonate-coated Napier grass fibers. 2nd International Conference on Research in Science, Engineering and Technology (ICRSET’2014); March 21–22, Dubai (UAE). p. 194–197.
44.
WongK, YousifB, LowK. The effects of alkali treatment on the interfacial adhesion of bamboo fibres. Proc Inst Mech Eng Part L: J Mater Des Appl. 2010;224:139–148.
45.
HashimMY, RoslanMN, OmarM, 2014. The impact of alkali treatment conditions on tensile strength of kenaf fiber. International Integrated Engineering Summit (IIES 2014); 1–4 December, Universiti Tun Hussein Onn Malaysia, Johor.
46.
Abdal-hayA, SuardanaNPG, ChoiK-S, Effect of diameters and alkali treatment on the tensile properties of date palm fiber reinforced epoxy composites. Int J Precis Eng Manuf. 2012;13:1199–1206.
47.
HaameemJA, MajidA, HaslanM, Effects of alkaline treatments on the tensile strength of Napier grass fibres. Appl Mech Mater. 2014;695:340–343.
48.
MohammedMH, DaudaB. Unsaturated polyester resin reinforced with chemically modified natural fibre. IOSR J Polym Text Eng. 2014;1:31–38.
49.
ShibataM, TakachiyoKI, OzawaK, Biodegradable polyester composites reinforced with short abaca fiber. J Appl Polym Sci. 2002;85:129–138.
50.
ArrakhizFZ, ElachabyM, BouhfidR, Mechanical and thermal properties of polypropylene reinforced with Alfa fiber under different chemical treatment. Mater Des. 2012;35:318–322.
51.
RokbiM, OsmaniH, ImadA, Effect of chemical treatment on flexure properties of natural fiber-reinforced polyester composite. Proc Eng. 2011;10:2092–2097.
52.
VilayV, MariattiM, TaibRM, Effect of fiber surface treatment and fiber loading on the properties of bagasse fiber–reinforced unsaturated polyester composites. Compos Sci Technol. 2008;68:631–638.
53.
LuT, JiangM, JiangZ, Effect of surface modification of bamboo cellulose fibers on mechanical properties of cellulose/epoxy composites. Compos Part B: Eng. 2013;51:28–34.
54.
VenkateshwaranN, PerumalAE, ArunsundaranayagamD. Fiber surface treatment and its effect on mechanical and visco-elastic behaviour of banana/epoxy composite. Mater Des. 2013;47:151–159.
55.
GomesA, MatsuoT, GodaK, Development and effect of alkali treatment on tensile properties of curaua fiber green composites. Compos Part A: Appl Sci Manuf. 2007;38:1811–1820.
56.
GuH. Tensile behaviours of the coir fibre and related composites after NaOH treatment. Mater Des. 2009;30:3931–3934.
57.
ArrakhizFZ, El AchabyM, KakouA, VaudreuilS, BenmoussaK, BouhfidR, Mechanical properties of high density polyethylene reinforced with chemically modified coir fibers: impact of chemical treatments. Mater Des. 2012;37:379–383.
58.
Van de WeyenbergI, TruongTC, VangrimdeB, Improving the properties of UD flax fibre reinforced composites by applying an alkaline fibre treatment. Compos Part A: Appl Sci Manuf. 2006;37:1368–1376.
59.
IslamMS, PickeringKL, ForemanNJ. Influence of alkali treatment on the interfacial and physico-mechanical properties of industrial hemp fibre reinforced polylactic acid composites. Compos Part A: Appl Sci Manuf. 2010;41:596–603.
60.
SawpanMA, PickeringKL, FernyhoughA. Improvement of mechanical performance of industrial hemp fibre reinforced polylactide biocomposites. Compos Part A: Appl Sci Manuf. 2011;42:310–319.
61.
SuardanaNPG, PiaoY, LimJK. Mechanical properties of hemp fibers and hemp/pp composites: effects of chemical surface treatment. Mater Phys Mech. 2011;11:1–8.
62.
OwenMM. The effects of alkali treatment on the mechanical properties of jute fabric reinforced epoxy composites. Int J Fiber Text Res. 2014;4:32–40.
63.
PrasadGLSR, KumarMS, RajeshG. Effect of fibre loading and successive alkali treatments on Tensile properties of short jute fibre reinforced polypropylene composites. Int J Eng Sci Invent. 2014;3:30–34.
64.
YousifB, ShalwanA, ChinC, Flexural properties of treated and untreated kenaf/epoxy composites. Mater Des. 2012;40:378–385.
65.
DedeepyaM, RajuTD, KumarTJ. Effect of alkaline treatment on mechanical and thermal properties Oftypha Angustifolia fiber reinforced composites. Int J Mech Ind Eng. 2012;1:12–14.
66.
AnikeDC, OnuegbuTU, OgbuIM, The effect of alkali treatment on the tensile behaviour and hardness of raffia palm fibre reinforced composites. Am J Polym Sci. 2014;4:117–121.
67.
ObasiH, IheaturuN, OnuohaF, Influence of alkali treatment and fibre content on the properties of oil palm press fibre reinforced epoxy biocomposites. Am J Eng Res. 2014;3:117–123.
68.
SiregarJP, SalitMS, Ab RahmanMZ, Effects of alkali treatments on the tensile properties of pineapple leaf fibre reinforced high impact polystyrene composites. Pertanika J SciTechnol. 2012;20:409–414.
69.
SiregarJP, SapuanSM, RahmanMZA, The effect of alkali treatment on the mechanical properties of short pineapple leaf fibre (PALF) reinforced high impact polystyrene (HIPS) composites. J Food, Agric Environ. 2010;8:1103–1108.
70.
LopattananonN, PanawarangkulK, SahakaroK, Performance of pineapple leaf fiber–natural rubber composites: the effect of fiber surface treatments. J Appl Polym Sci. 2006;102:1974–1984.
71.
LopattananonN, PayaeY, SeadanM. Influence of fiber modification on interfacial adhesion and mechanical properties of pineapple leaf fiber-epoxy composites. J Appl Polym Sci. 2008;110:433–443.
72.
SomashekarS, ShanthakumarG. Effect of alkali treatment on mechanical properties of sisal-reinforced epoxy polymer matrix composite. Int J Mech Eng Robot Res. 2014;3:441–450.
73.
SreekumarP, ThomasSP, Marc SaiterJ, Effect of fiber surface modification on the mechanical and water absorption characteristics of sisal/polyester composites fabricated by resin transfer molding. Compos Part A: Appl Sci Manuf. 2009;40:1777–1784.
74.
Kim JTAN. Netravali. Mercerization of sisal fibers: Effect of tension on mechanical properties of sisal fiber and fiber-reinforced composites. Compos Part A: Appl Sci Manuf. 2010;41:1245–1252.
75.
BachtiarD, SapuanS, HamdanM. The influence of alkaline surface fibre treatment on the impact properties of sugar palm fibre-reinforced epoxy composites. Polym-Plast Technol Eng. 2009;48:379–383.
76.
AbralH, GafarMF, AndriyantoH, Alkali treatment of screw pine (Pandanus Odoratissimus) fibers and its effect on unsaturated polyester composites. Polym-Plast Technol Eng. 2012;51:12–18.
77.
MylsamyK, RajendranI. The mechanical properties, deformation and thermomechanical properties of alkali treated and untreated Agave continuous fibre reinforced epoxy composites. Mater Des. 2011;32:3076–3084.
78.
MasoodiR, PillaiKM. A study on moisture absorption and swelling in bio-based jute-epoxy composites. J Reinf Plast Compos. 2012;31:285–294.
79.
MuñozE, García-ManriqueJ. Water absorption behaviour and its effect on the mechanical properties of flax fibre reinforced bioepoxy composites. Composites. 2015;2:1–10.
80.
ZhuJ, AbhyankarH, NjugunaJ.2013. Effect of fibre treatment on water absorption and tensile properties of flax/tannin composites. Proceedings of the ICMR.
81.
NaveenJ, Satheesh KumarTP. Effect of water absorption on the tensile behaviour of the woven hybrid natural fibre reinforced polymer composites. Int J Innov Res Sci Eng Technol. 2014;3:1091–1095.
82.
HaameemMJA, MajidMA, AfendiM, Effects of water absorption on Napier grass fibre/polyester composites. Compos Struct. 2016;144:138–146.
83.
HunerU. Effect of water absorption on the mechanical properties of flax fiber reinforced epoxy composites. Adv Sci Technol Res J. 2015;9:1–6.
84.
DhakalH, ZhangZ, RichardsonM. Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites. Compos Sci Technol. 2007;67:1674–1683.
85.
GirishaC, SanjeevamurthyG, SrinivasG. Sisal/coconut coir natural fibers-epoxy composites: water absorption and mechanical properties. Int J Eng Innov Technol. 2012;2:166–170.
86.
RomanziniD, LavorattiA, OrnaghiHL, Influence of fiber content on the mechanical and dynamic mechanical properties of glass/ramie polymer composites. Mater Des. 2013;47:9–15.
87.
ScidaD, AssararM, PoilâneC, Influence of hygrothermal ageing on the damage mechanisms of flax-fibre reinforced epoxy composite. Compos Part B: Eng. 2013;48:51–58.
88.
ParweenAK, OmerS, ZaroogBA, Fracture toughness of sugar palm fiber reinforced epoxy composites. Int J Sci Res. 2013;2:273–279.
89.
Le DuigouA, BourmaudA, DaviesP, Long term immersion in natural seawater of Flax/PLA biocomposite. Ocean Eng. 2014;90:140–148.
90.
NjokuR, ObikweluD. Swelling characteristics and tensile properties of natural fiber reinforced plastic in selected solvents. Niger J Technol. 2008;27:58–63.
91.
NosbiN, AkilHMZ, IshakAM, Behavior of kenaf fibers after immersion in several water conditions. BioResources. 2011;6:950–960.
92.
LemanZ, SapuanSM, AzwanM, The effect of environmental treatments on fiber surface properties and tensile strength of sugar palm fiber-reinforced epoxy composites. Polym-Plast Technol Eng. 2008;47:606–612.
93.
IshakM, LemanZ, SapuanS, The effect of sea water treatment on the impact and flexural strength of sugar palm fibre reinforced epoxy composites. Int J Mech Mater Eng. 2009;4:316–320.
94.
AkilHM, ChengLW, IshakZM, Water absorption study on pultruded jute fibre reinforced unsaturated polyester composites. Compos Sci Technol. 2009;69:1942–1948.
95.
SekiY, SeverK, SarıkanatM, 2011. Jute/polyester composites: The effect of water aging on the interlaminar shear strength (ILSS). 6th International Advanced Technologies Symposium (IATS’11), Elazığ, Turkey.
96.
SanjayM, YogeshaB. Study on water absorption behaviour of jute and kenaf fabric reinforced epoxy composites: hybridization effect of e-glass fabric. Int J Compos Mater. 2016;6:55–62.
97.
SuleU, IsaM, AmehA, Studies on the properties of short okra/glass fibre reinforced epoxy hybrid composite. Int J Sci Technol. 2014;2:260–265.
98.
KhalilHA, JawaidM, BakarAA. Woven hybrid composites: water absorption and thickness swelling behaviours. BioResources. 2011;6:1043–1052.
99.
YahayaR, SapuanS, JawaidM, 2016. Effect of moisture absorption on mechanical properties of natural fibre hybrid composite. Proceedings of the 13th International Conference on Environment, Ecosystems and Development (EED'15), ISBN. 2015:978–1.
100.
SezginH, BerkalpOB. The effect of hybridization on significant characteristics of jute/glass and jute/carbon-reinforced composites. J Ind Text. 2016:1–14. http://dx.doi.org/10.1177%2F1528083716644290.
101.
PanthapulakkalS, SainM. Injection-molded short hemp fiber/glass fiber-reinforced polypropylene hybrid composites – mechanical, water absorption and thermal properties. J Appl Polym Sci. 2007;103:2432–2441.
102.
MishraS, MohantyAK, DrzalLT, Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites. Compos Sci Technol. 2003;63:1377–1385.
103.
VenkateshRP. Study on physical and mechanical properties of NFRP hybrid composites. Indian J Pure Appl Phys. 2015;53:175–180.
104.
AjiIS, ZainudinES, AbdanK, Mechanical properties and water absorption behavior of hybridized kenaf/pineapple leaf fibre-reinforced high-density polyethylene composite. J Compos Mater. 2012;47:979–990.
105.
VenkateshwaranN, ElayaPerumalA, AlavudeenA, Mechanical and water absorption behaviour of banana/sisal reinforced hybrid composites. Mater Des. 2011;32:4017–4021.
106.
RoutJ, MisraM, TripathySS, The influence of fibre treatment on the performance of coir-polyester composites. Compos Sci Technol. 2001;61:1303–1310.
