This study aims to produce a long-term antistatic acrylic-based film by incorporating ionic liquid (IL), 1-ethyl-2,3-dimethylimidazolium ethyl sulphate (EIL) into acrylic resin. After loading, characterisations of samples were conducted by mechanically, thermally and morphologically. In order to determine antistatic properties, surface resistivity of samples was measured by using at different time intervals. The results indicated that IL loaded polymers showed a good antistatic property for a long time. The effect of incorporation on tensile strength, tensile modulus, flexural strength and flexural modulus of polymer were also obtained. After loading process, tensile strength, tensile modulus, flexural strength and flexural modulus values decreased considerably. The decrement in tensile strength of polymer is much less than that in flexural strength. The effect of EIL incorporation into acrylic resin on thermal conductivity and surface wettability was also investigated. From scanning electron microscopy images, EIL particles in nano-size range were observed in polymer structure.
XanthosM.: ‘Functional fillers for plastics’, 2010, Weinheim, Wiley.
2.
RoesslerA. and SchottenbergerH.: ‘Antistatic coatings for wood-floorings by imidazolium salt-based ionic liquids’, Progr. Org. Coat., 2014, 77, (3), 579–582. doi: 10.1016/j.porgcoat.2013.11.022
3.
CostaJ. C., OliveiraM., MachadoA. V., Lanceros-MéndezS. and BotelhoG.: ‘Effect of antistatic additives on mechanical and electrical properties of polyethylene foams’, J. Appl. Polym. Sci., 2009, 112, (3), 1595–1600. doi: 10.1002/app.29503
4.
DrakeN.: ‘Polymeric materials for electrostatic applications: a report from Rapra's Industry Analysis and Publishing Group’; 1996, Shawbury, Rapra Technology Limited.
5.
ZweifelH., AmosS. E., MaierR. D. and SchillerM.: ‘Plastics additives handbook’; 2009, Boulevard, Hanser.
6.
MarkarianJ.: ‘New developments in antistatic and conductive additives’, Plast. Addit. Compound., 2008, 10, (5), 22–25. doi: 10.1016/S1464-391X(08)70172-7
7.
GrobM. C. and MinderE.: ‘Permanent antistatic additives: new developments’, Plast. Addit. Compound., 1999, 1, (3), 20–26. doi: 10.1016/S1464-391X(99)80074-9
8.
TsurumakiA., TajimaS., IwataT., ScrosatiB. and OhnoH.: ‘Antistatic effects of ionic liquids for polyether-based polyurethanes’, Electrochim. Acta, 2015, 175, 13–17. doi: 10.1016/j.electacta.2014.12.128
9.
LouF.-L., SuiZ.-J., SunJ.-T., LiP., ChenD. and ZhouX.-G.: ‘Synthesis of carbon nanofibers/mica hybrids for antistatic coatings’, Mater. Lett., 2010, 64, (6), 711–714. doi: 10.1016/j.matlet.2009.12.046
10.
PangH., ChenT., ZhangG., ZengB. and LiZ.-M.: ‘An electrically conducting polymer/graphene composite with a very low percolation threshold’, Mater. Lett., 2010, 64, (20), 2226–2229. doi: 10.1016/j.matlet.2010.07.001
IwataT., TsurumakiA., TajimaS. and OhnoH.: ‘Fixation of ionic liquids into polyether-based polyurethane films to maintain long-term antistatic properties’, Polymer, 2014, 55, (10), 2501–2504. doi: 10.1016/j.polymer.2014.03.028
13.
AtesM., KarazehirT. and Sezai SaracA.: ‘Conducting polymers and their applications’, Curr. Phys. Chem., 2012, 2, (3), 224–240. doi: 10.2174/1877946811202030224
14.
PernakJ., CzepukowiczA. and PoźniakR.: ‘New ionic liquids and their antielectrostatic properties’, Indust. Eng. Chem. Res., 2001, 40, (11), 2379–2383. doi: 10.1021/ie000689g
15.
ArmandM., EndresF., MacFarlaneD. R., OhnoH. and ScrosatiB.: ‘Ionic-liquid materials for the electrochemical challenges of the future’, Nat. Mater., 2009, 8, (8), 621–629. doi: 10.1038/nmat2448
16.
TsurumakiA., KagimotoJ. and OhnoH.: ‘Properties of polymer electrolytes composed of poly(ethylene oxide) and ionic liquids according to hard and soft acids and bases theory’, Polym. Adv. Technol., 2011, 22, (8), 1223–1228. doi: 10.1002/pat.1931
17.
WuB., HuZ., ZhangY., XiaoY., LeiJ. and ZhouC.: ‘Synthesis and characterization of permanently antistatic polyurethanes containing ionic liquids’, Polym. Eng. Sci., 2016, 56, (6), 629–635. doi: 10.1002/pen.24288
18.
DingY., TangH., ZhangX., WuS. and XiongR.: ‘Antistatic ability of 1-n-tetradecyl-3-methylimidazolium bromide and its effects on the structure and properties of polypropylene’, Eur. Polym. J., 2008, 44, (4), 1247–1251. doi: 10.1016/j.eurpolymj.2008.01.030
19.
LavallR. L., FerrariS., TomasiC., MarzantowiczM., QuartaroneE., MagistrisA., MustarelliP., LazzaroniS. and FagnoniM.: ‘Novel polymer electrolytes based on thermoplastic polyurethane and ionic liquid/lithium bis(trifluoromethanesulfonyl)imide/propylene carbonate salt system’, J. Power Sources, 2010, 195, (17), 5761–5767. doi: 10.1016/j.jpowsour.2010.03.085
20.
SmithD.: ‘Synthesis and characterization of poly(ionic liquids) derived from 1-ethyl-3-methyl-4-vinylimidazolium triflate’, Thesis, Rochester Institute of Technology, 2011. Available athttp://scholarworks.rit.edu/theses/6016.
21.
GabbottP.: ‘Principles and applications of thermal analysis‘; 2008, Oxford, Blackwell Pub.
22.
LimaG. M. and Lima e SilvaS. M. M. D.: ‘Thermal effusivity estimation of polymers in time domain’, J. Brazil. Soc. Mech. Sci. Eng., 2011, 33, 393–399. doi: 10.1590/S1678-58782011000400002
23.
LimH. and HoagS. W.: ‘Plasticizer effects on physical–mechanical properties of solvent cast soluplus® films’, AAPS PharmSciTech, 2013, 14, (3), 903–910. doi: 10.1208/s12249-013-9971-z
24.
Cichowska-KopczynskaI., JoskowskaM. and AranowskiR.: ‘Wetting processes in supported ionic liquid membranes technology’, Physicochem. Probl. Min. Process., 2014, 50, (1), 373–386.
25.
ZhangQ.-G., WangN.-N. and YuZ.-W.: ‘The hydrogen bonding interactions between the ionic liquid 1-ethyl-3-methylimidazolium ethyl sulfate and water’, J. Phys. Chem. B, 2010, 114, (14), 4747–4754. doi: 10.1021/jp1009498
