The aim of this study was to investigate influences of three different ethylene copolymers on the toughness and other properties of very brittle biopolymer PLA (polylactide). For this aim, PLA was melt blended by twin-screw extruder with various amounts of ethylene vinyl acetate (EVA), ethylene-methyl-acrylate (EMA) and ethylene-n-butyl acrylate-glycidyl-methacrylate (EBA-GMA). SEM and DSC analyses indicated that these ethylene copolymers were thermodynamically immiscible with phase separation in the form of 1–5 µm sized round domains in the PLA matrix. Rubber toughening mechanisms of EVA, EMA and EBA-GMA were very effective to improve ductility and toughness of PLA significantly. Depending on the type and content of the ethylene copolymers, the highest increases in % elongation at break, Charpy impact toughness and GIC fracture toughness values of PLA were as much as 160, 320 and 158%, respectively. Although there were no detrimental effects of using EVA, EMA and EBA-GMA on the thermal properties of PLA, they resulted in certain level of reductions in stiffness, strength and hardness values.
JiangJ., SuL., ZhangK. and WuG.: ‘Rubber-toughened PLA blends with low thermal expansion’, J. Appl. Polym. Sci., 2012, 128, 3993–4000. doi: 10.1002/app.38642
3.
OdentJ., RaquezJ., DuquesneE. and DuboisP.: ‘Random aliphatic copolyesters as new biodegradable impact modifiers for polylactide materials’, Eur. Polym. J., 2012, 48, 331–340. doi: 10.1016/j.eurpolymj.2011.11.002
4.
YokoharaT. and YamaguchiM.: ‘Structure and properties for biomass-based polyester blends of PLA and PBS’, Eur. Polym. J., 2008, 44, 677–685. doi: 10.1016/j.eurpolymj.2008.01.008
5.
HeY., MasudaT., CaoA., YoshieN., DoiY. and InoueY.: ‘Thermal, crystallization and biodegradation behavior of Poly(3-hydroxybutyrate) blends with Poly(butylene succinate-co-butylene adipate) and Poly(butylene succinate-co-Ɛ-caprolactone)’, Polym. J., 1999, 31, 184–192. doi: 10.1295/polymj.31.184
6.
LiY. and ShimizuH.: ‘Improvement in toughness of poly(L-lactide) (PLLA) through reactive blending with acrylonitrile-butadiene-styrene copolymer (ABS): morphology and properties’, Eur. Polym. J., 2009, 45, 738–746. doi: 10.1016/j.eurpolymj.2008.12.010
7.
JiangL., WolcottM. P. and ZhangJ.: ‘“Study of biodegradable polylactide/poly(butylene adipate-co-terephthlate) Blends’, Biomacromolecules, 2006, 7, 199–207. doi: 10.1021/bm050581q
8.
NodaI., SatkowskiM. M., DowreyA. E. and MarcottC.: ‘Polymer alloys of nodax copolymers and poly(lactic acid)’, Macromol. Biosci., 2004, 4, 269–275. doi: 10.1002/mabi.200300093
9.
ZhangW., ChenL. and ZhangY.: ‘Surprising shape-memory effect of polylactide resulted from toughening by polyamide elastomer’, Polymer, 2009, 50, 1311–1315. doi: 10.1016/j.polymer.2009.01.032
10.
HoC.-H., WangC.-H., LinC.-I. and LeeY.-D.: ‘Synthesis and characterization of TPO-PLA copolymer and its behavior as compatibilizer for PLA/TPO blends’, Polymer, 2008, 49, 3902–3910. doi: 10.1016/j.polymer.2008.06.054
11.
LiY., LiuL., ShiY., XiangF., HuangT., WangY. and ZhouZ.: ‘Morphology, Rheological, crystallization behavior, and mechanical properties of poly(L-lactide)/ethylene-co-Vinyl acetate blends with different VA contents’, J. Appl. Polym. Sci., 2011, 121, 2688–2698. doi: 10.1002/app.33581
12.
MaP., HristovaD. G., GoossensJ. G. P., SpoelstraA. B., ZhangY. and LemstraP. J.: ‘Toughening of poly(lactic acid) by ethylene-co-vinyl acetate copolymer with different vinyl acetate contents’, Eur. Polym. J., 2012, 48, 146–154. doi: 10.1016/j.eurpolymj.2011.10.015
13.
CongD. V., HoangT., GiangN. V., HaN. T., LamT. D. and SumitaM.: ‘A novel enzymatic biodegradable route for PLA/EVA blends under agricultural soil of Vietnam’, Mater. Sci. Eng. C, 2012, 32, 558–563. doi: 10.1016/j.msec.2011.12.012
14.
YoonJ.-S., OhS.-H., KimM.-N., ChinI.-J. and KimY.-H.: ‘Thermal and mechanical properties of poly(L-lactic acid)-poly(ethylene-co-vinyl acetate)’, Polymer, 1999, 40, 2303–2312. doi: 10.1016/S0032-3861(98)00463-7
15.
PlutoM., MurariuM., DechiefA., BonnaudL., GaleskiA. and DuboisP.: ‘Impact-Modified polylactide-calcium sulfate composites: structure and properties’, J. Appl. Polym. Sci., 2012, 125, 4302–4315. doi: 10.1002/app.36562
16.
LiuH., SongW., ChenF., GuoL. and ZhangJ.: ‘Interaction of microstructure and interfacial adhesion on impact performance of polylactide (PLA) ternary blends’, Macromolecules, 2011, 44, 1513–1522. doi: 10.1021/ma1026934
17.
YehJ., TsouC., LiY., XiaoH., WuC., ChaiW., LaiY. and WangC.: ‘The compatible and mechanical properties of biodegradable poly(Lactic Acid)/ethylene glycdyl methacrylate copolymer blends’, J. Polym. Res., 2012, 19, 9766–9970. doi: 10.1007/s10965-011-9766-4
18.
OyamaH. T.: ‘Super-tough poly(lactic acid) materials: reactive blending with ethylene copolymer’, Polymer, 2009, 50, 747–751. doi: 10.1016/j.polymer.2008.12.025
19.
BaouzT., RezguiF. and YilmazerU.: ‘Ethylene-methyl acrylate-glycidyl methacrylate toughened poly(lactic acid) nanocomposites’, J. Appl. Polym. Sci., 2012, 128, 3193–3204. doi: 10.1002/app.38529
20.
ZhangX., LiY., HanL., HanC., XuK., ZhouC., ZhangM. and DongL.: ‘Improvement in toughness and crystallization of poly(L-lactic acid) by melt blending with ethylene/methyl acrylate/glycidyl methacrylate terpolymer’, Polym. Eng. Sci., 2013, 53, 2498–2508. doi: 10.1002/pen.23507
21.
FischerE. W., SterzelH. J. and WegnerG.: ‘Investigation of structure of solution grown crystals of lactide copolymers by means of chemical reactions’, Colloid Polym. Sci., 1973, 251, 11.
