Electro-conductive poly(vinyl alcohol)/multi-walled carbon nanotube (PVOH/MWNT) and poly(ethylene-co-vinyl alcohol) (EVOH)/MWNT nanocomposites were prepared by precipitation saponification method. The MWNT was functionalised by electron beam irradiation in air at 1200 kGy doses. The electrical resistivity, thermal and mechanical properties, and positive temperature coefficient (PTC) behaviour of these nanocomposites were investigated. The melting and crystallisation peak temperatures of both nanocomposite systems were shifted at a higher temperature with the increase in saponification time. Their crystallinity and mechanical strength also increased with saponification time, indicating an increase in intermolecular hydrogen bond between vinyl alcohol groups. With the saponification time, PTC peak temperature of EVA28/MWNT and EVA40/MWNT nanocomposites was shifted at a higher temperature and followed by a negative temperature coefficient (NTC) of resistivity. However, the saponified PVAc/MWNT nanocomposites showed only NTC behaviour over a temperature range of 30–140°C.
LeeE. J., YoonY. S. and ParkE. S.: ‘Morphology, resistivity, and thermal behavior of EVOH/Carbon Black and EVOH/Graphite composites prepared by simple saponification method’, Polym. Compos., 2011, 32, 714–726. doi: 10.1002/pc.21090
2.
DineshabP., RenukappaaN. M., Siddaramaiaha, and RajancJ. S.: ‘Electrical resistivity and electromagnetic interference shielding effectiveness of multiwalled Carbon Nanotubes filled Carbon Black-High Density Polyethylene’, Nanocomposites. International Conference on Electronics, Biomedical Engineering and its Applications (ICEBEA'2012) Jan. 7–8, 2012.
3.
ParkE. S., JangL. W. and YoonJ. S.: ‘Resistivity and thermal reproducibility of Carbon Black and Metallic powder filled Silicone rubber heaters’, J. Appl. Polym. Sci., 2005, 95, 1122–1128. doi: 10.1002/app.21340
4.
KimG. T. and ParkE. S.: ‘Thermal reproducibility and voltage stability of carbon black/multiwalled carbon nanotube and carbon black/SnO2–Sb coated titanium dioxide filled silicone rubber heaters’, J. Appl. Polym. Sci., 2008, 109, 1381–1387. doi:10.1002/app.28200
5.
ParkE. S.: ‘Resistivity and thermal reproducibility of the carbon black and SnO2/Sb coated titanium dioxide filled silicone rubber heaters’, Macromol. Mater. Eng., 2005, 290, 1213–1219. doi: 10.1002/mame.200500214
6.
ParkE. S.: ‘Resistivity and thermal reproducibility of high-density polyethylene heaters filled with carbon black’, Macromol. Mater. Eng., 2006, 291, 690–696. doi: 10.1002/mame.200500425
7.
Park ESE. S., YunS. J., KimG. T., ParkI. J., ChoiW. H., JeongJ. W., HongS. Y., ParkH. W., JangL. W. and YoonJ. S.: ‘Preparation of positive-temperature coefficient heaters using platinum-catalyzed silicone rubber’, J. Appl. Polym. Sci., 2004, 94, 1611–1617. doi: 10.1002/app.20107
8.
NarkisM. and VaxmanA.: ‘Resistivity behavior of filled electrically conductive crosslinked polyethylene’, J. Appl. Polym. Sci., 1984, 29, (5), 1639–1652. doi:10.1002/app.1984.070290518
9.
LeeE. J. and ParkE. S.: ‘Morphology, resistivity, and PTC behavior of EVOH/CB composites prepared by solvent casting saponification and precipitation saponification’, Polym. Compos. (in press, published online: 22 Jul 2015,http://onlinelibrary.wiley.com/doi/10.1002/pc.23714/abstract ).
10.
XuH. P., WuY. H., YangD. D., WangJ. R. and XieH. Q.: ‘Study on theories and influence factors of PTC property in polymer-based conductive composites’, Rev. Adv. Mater. Sci., 2011, 27, 173–183.
11.
StevensE. S.: ‘Green plastics: an introduction to the new science of Biodegrad-able plastics’, 10–30; 2002, Princeton, NJ, Princeton University Press.
12.
KobayashiM., ToguchidaJ. and OkaM.: ‘Preliminary study of polyvinyl alcohol-hydrogel (PVA-H) artificial meniscus’, Biomaterials, 2003, 24, (4), 639–647. doi: 10.1016/S0142-9612(02)00378-2
13.
PérezE., LujanM. and SalazarJ. M.: ‘Preparation and properties of terpolymers of ethylene, vinyl acetate and vinyl alcohol’, Macromol. Chem. Phys., 2000, 201, (12), 1323–1328. doi: 10.1002/1521-3935(20000801)201:12<1323::AID-MACP1323>3.0.CO;2-7
14.
IwanamiT. and HiraiY.: ‘Ethylene vinyl alcohol resins for gas barrier material’, TAPPI J, 1983, 66, (10), 85–90.
15.
GeorgeJ. J. and BhowmickA. K.: ‘Influence of matrix polarity on the properties of ethylene vinyl acetate–carbon nanofiller nanocomposites’, Nanoscale Res. Lett., 2009, 4, 655–664. doi: 10.1007/s11671-009-9296-8
16.
LeeE. J., YoonJ. S., ParkE. S.: ‘Preparation and properties of the highly porous poly(ethylene-co-vinyl alcohol)/multiwalled carbon nanotube nanocomposites prepared by a simple Saponification method’, J. Appl. Polym. Sci., 2012, 125, E691–E704. doi: 10.1002/app.36537
17.
YiJ. Y. and ChoiG. M.: ‘Percolation behavior of conductor-insulator composites with varying aspect ratio of conductive fiber’, J. Electroceram, 1999, 3, (4), 361–369. doi: 10.1023/A:1009913913732
18.
ClingermanM. L., WeberE. H., KingJ. A. and SchulzK. H.: ‘Development of an additive equation for predicting the electrical conductivity of carbon-filled composites’, J. Appl. Polym. Sci., 2003, 88, (9), 2280–2299. doi: 10.1002/app.11938
19.
KalaitzidouK., FukushimaH. and DrzalL. T.: ‘A route for Polymer Nanocomposites with engineered electrical conductivity and percolation threshold’, Materials, 2010, 3, (2), 1089–1103. doi: 10.3390/ma3021089
20.
ClingermanM. L., WeberE. H., KingJ. A. and SchulzK. H.: ‘Development of an additive equation for predicting the electrical conductivity of carbon-filled composites’, J. Appl. Polym. Sci., 2003, 88, (9), 2280–2299. doi: 10.1002/app.11938
21.
GöktürkH. S., FiskeT. J. and KalyonD. M.: ‘Effects of particle shape and size distributions on the electrical and magnetic properties of nickel/polyethylene composites’, J. Appl. Polym. Sci., 1993, 50, (11), 1891–1901. doi: 10.1002/app.1993.070501105
22.
NatsukiT., EndoM. and TakahashiT.: ‘Percolation study of orientated short-fiber composites by a continuum model’, Physica. A., 2005, 352, (2–4), 498–508. doi: 10.1016/j.physa.2004.12.059
23.
LuW., ChouT. W. and ThostensonT. T.: ‘A three-dimensional model of electrical percolation thresholds in carbon nanotube-based composites’, Appl. Phys. Lett., 2010, 96, (22), Article no. 223106, 1–3.
24.
BehnamA., GuoJ. and UralA.: ‘Effects of nanotube alignment and measurement direction on percolation resistivity in single-walled carbon nanotube films’, J. Appl. Phys., 2007, 102, (4), Article no. 044313, 1–7. doi: 10.1063/1.2769953
25.
Varma-NairM. and WunderlichB.: ‘Heat capacity and other thermodynamic properties of linear macromolecules. X. Update of the ATHAS 1980 Data Bank’, J. Phys. Chem., 1991, 20, (2), 349–404.
26.
PeppasN. A. and MerrillE. W.: ‘Differential scanning calorimetry of crystallized PVA hydrogels’, J. Appl. Poly. Sci., 1976, 20, (6), 1457–1465. doi: 10.1002/app.1976.070200604
27.
ParkE. S., KimM. N. and YoonJ. S.: ‘Grafting of polycaprolactone onto poly(ethylene-co-vinyl alcohol) and application to polyethylene-based bioerodable blends’, J. Polym. Sci.: Part B: Polym. Phys., 2002, 40, 2561–2569. doi:10.1002/polb.10312
28.
HollandB. J. and HayJ. N.: ‘The thermal degradation of poly(vinyl alcohol)’, Polymer, 2001, 42, (16), 6775–6783. doi: 10.1016/S0032-3861(01)00166-5
29.
MehendruP. C., PathakN. L., JainK. and MehendruP.: ‘Electrical conduction in pure and iodine-doped polyvinyl acetate thick films’, Phys. Stat. Sol., 1977, 42, (1), 403–407. doi: 10.1002/pssa.2210420146
30.
LiZ. S., ZhangG., LiJ. X., WangX. L., LiuX. Q., LiH. D.: ‘Research on the conductivity of different CB filled PVC/EPDM NTC composites’, China Elastom., 2007, 17, (2), 66–70.
