Graphite/Mo joining has been carried out using Ti/Cu or Ti/Cu/Nb/Ti/Cu foils. The joining region in the joint using Ti/Cu foils is mainly composed of Ti3Cu4 and TiCu. The joining region using Ti/Cu/Nb/Ti/Cu foils contains a joining zone I, an Nb interlayer and a joining zone II. Both the joining zones I and II are made up of Ti3Cu4 and TiCu. The Nb foil diffuses and dissolves into the liquid fillers during the bonding. The joint using Ti/Cu/Nb/Ti/Cu foils shows higher shear strength than that using Ti/Cu foils, implying the contribution of Nb foil to the joint stress relief and to the joint strength promotion.
DongLL, ChenW, HouLT, . Metallurgical and mechanical examinations of molybdenum/graphite joints by vacuum arc pressure brazing using Ti-Zr filler materials. J Mater Process Technol. 2017;249:39–45. doi:10.1016/j.jmatprotec.2017.06.007
2.
WenYH, ChenWG, DingBJ.Diffusion welding interface reaction analysis of molybdenum and graphite. Xiyou Jinshu. 2011;35:227–231. Chinese.
3.
FedotovI, SuchkovA, SlivaA, . Study of the microstructure and thermomechanical properties of Mo/graphite joint brazed with Ti–Zr–Nb–Be powder filler metal. J Mater Sci. 2021;56(19):11557–11568. doi:10.1007/s10853-021-06015-9
4.
LuQB, LongWM, ZhongSJ, . TZM/graphite interface behavior in high-temperature brazing by Ti-based brazing filler materials. Weld World. 2020;64(11):1877–1885. doi:10.1007/s40194-020-00967-3
CaiYQ, XuB, MaXJ, . Bonding of graphite to Cu with metal multi-foils. Arch Civ Mech Eng. 2023;23(1):58. doi:10.1007/s43452-023-00603-z
7.
JiangQY, WangYJ, XuHM, . Transient liquid phase bonding of graphite to Ti6Al4V alloy. Sci Technol Weld Joining. 2022;27(8):615–620. doi:10.1080/13621718.2022.2095195
8.
MaXJ, MaoYW, DuanY, . Effect of Nb or Ta interlayer on microstructure and mechanical properties of graphite/Ti6Al4V alloy joints. Adv Eng Mater. 2021;23(4):2001237. doi:10.1002/adem.202001237
9.
ZhongZH, ZhouZJ, GeCC.Brazing of doped graphite to Cu using stress relief interlayers. J Mater Process Technol. 2009;209(5):2662–2670. doi:10.1016/j.jmatprotec.2008.06.021
VidyukTM, DudinaDV, EsikovMA, . Pulsed current-assisted joining of copper to graphite using Ti-Cu brazing layers. Mater Today Proc. 2020;25:377–380. doi:10.1016/j.matpr.2019.12.095
12.
LiuK, LiYJ, XiaCZ, . Microstructural evolution and properties of TLP diffusion bonding super-Ni/NiCr laminated composite to Ti-6Al-4 V alloy with Cu interlayer. Mater Des. 2017;135:184–196. doi:10.1016/j.matdes.2017.09.028
13.
YangJH, ZhangLX, SunZ, . A novel composite interlayer assembled for C/SiC-GH99 brazed joints. J Manuf Processes. 2019;38:543–548. doi:10.1016/j.jmapro.2019.01.030
14.
ChuangHW, LiawDW, DuYC, . Brazing of Mo and Nb using two active braze alloys. Mater Sci Eng A. 2005;390(1-2):350–361. doi:10.1016/j.msea.2004.08.027
15.
JinCK, WangY, YangZW, . C/C composite surface modified by electrophoretic depositing SiC nanowires and its brazing to Nb. Ceram Int. 2020;46(1):204–211. doi:10.1016/j.ceramint.2019.08.249
16.
ChuQL, ZhangM, LiJH, . Joining of CP-Ti/Q345 sheets by Cu-based filler metal and effect on interface. J Mater Process Technol. 2015;225:67–76. doi:10.1016/j.jmatprotec.2015.05.017
17.
ElrefaeyA, TillmannW.Evaluation of transient liquid phase bonding between titanium and steel. Adv Eng Mater. 2009;11(7):556–560. doi:10.1002/adem.200900021
18.
ChangXT, SunSB.Effect of Mo on phase composition, microstructure and tribological property of TiC reinforced plasma sprayed coatings. Surf Eng. 2011;27(4):300–305.
19.
DuanY, MaoYW, XuZM, . Joining of graphite to Ti6Al4V alloy using Cu-based fillers. Adv Eng Mater. 2019;21(11):1900719. doi:10.1002/adem.201900719
20.
KangYH, FengKM, ZhangWT, . Microstructural and mechanical properties of CFC composite/Ti6Al4V joints brazed with Ag-Cu-Ti and refractory metal foils. Arch Civ Mech Eng. 2021;21(3):113. doi:10.1007/s43452-021-00268-6
21.
ZhouXW, HuangYD, ChenYH, . Laser joining of Mo and Ta sheets with Ti6Al4V or Ni filler. Opt Laser Technol. 2018;106:487–494. doi:10.1016/j.optlastec.2018.05.004
22.
ApblettC, FicaloraPJ.Stress generation in thin Cu-Ti films in vacuum and hydrogen. J Appl Phys. 1991;69(8):4431–4432. doi:10.1063/1.348370
23.
WangG, WangZT, WangW, . Microstructure and shear strength of ZrB2-SiC/Ti-6Al-4 V joint by TiCuZrNi with Cu foam. Ceram Int. 2019;45(8):10223–10229. doi:10.1016/j.ceramint.2019.02.074
24.
CardarelliF.Less common nonferrous metals, materials handbook. Cham: Springer; 2018.
25.
XingLL, LinJC, HuangM, . Joining of graphite to copper with Nb interlayer: microstructure and mechanical properties. Adv Eng Mater. 2019;21(2):1800810. doi:10.1002/adem.201800810
26.
OngFS, HirobumiT, EiichiS.Intermetallics evolution and fracture behavior of Nb interlayer inserted Si3N4/Ti joints brazed with AgCuTi filler. Mater Sci Eng A. 2019;762:138096. doi:10.1016/j.msea.2019.138096
