This study investigated the microstructure variations in Ti17 linear friction welded joints and evaluated the effect of strain rate and post weld heat treatment on the strain hardening behaviour. The welded zone of the as-welded joints consists of equiaxed β grains, while the prior-β grains in the thermal mechanical affected zone are severely deformed. After heat treatment, fine needle-like αS precipitates dispersed in the β matrix strengthen the tensile properties. The fracture mechanism transforms from brittle to ductile. The strain hardening capacity and exponent are negatively correlated with strain rate. At higher strain rates, the strain rate sensitivity increases during the initial stage of deformation.
WilliamsJC, RodneyRR.Opportunities and issues in the application of titanium alloys for aerospace components. Metals (Basel). 2020;10(6):705. doi:10.3390/met10060705
2.
McAndrewAR, ColegrovePA, BührC, . A literature review of Ti-6Al-4 V linear friction welding. Prog Mater Sci. 2018;92:225–257. doi:10.1016/j.pmatsci.2017.10.003
3.
VairisA, FrostM.High frequency linear friction welding of a titanium alloy. Wear. 1998;217(1):117–131. doi:10.1016/S0043-1648(98)00145-8
4.
WanjaraP, JahaziM.Linear friction welding of Ti-6Al-4V: processing, microstructure, and mechanical-property inter-relationships. Metall Mater Trans A. 2005;36:2149–2164. doi:10.1007/s11661-005-0335-5
5.
LiW, MaT, YangS.Microstructure evolution and mechanical properties of linear friction welded Ti-5Al-2Sn-2Zr-4Mo-4Cr (Ti17) titanium alloy joints. Adv Eng Mater. 2010;12(1–2):35–43. doi:10.1002/adem.200900185
6.
Ballat-DurandD, BouvierS, RisbetM.Contributions of an innovative post-weld heat treatment to the micro-tensile behavior of two mono-material linear friction welded joints using: the β-metastable Ti-5Al-2Sn-2Zr-4Mo-4Cr (Ti17) and the near-α Ti-6Al-2Sn-4Zr-2Mo (Ti6242) Ti-alloys. Mater Sci Eng A. 2019;766:138334. doi:10.1016/j.msea.2019.138334
7.
GarcíaJM, GaslainF, MorgeneyerTF.On the effect of a thermal treatment on the tensile and fatigue properties of weak zones of similar Ti17 linear friction welded joints and parent material. Mater Charact. 2020;169:110570. doi:10.1016/j.matchar.2020.110570
8.
KhodaverdizadehH, MahmoudiA, HeidarzadehA, . Effect of friction stir welding (FSW) parameters on strain hardening behavior of pure copper joints. Mater Des. 2012;35:330–334. doi:10.1016/j.matdes.2011.09.058
9.
ZhaoP, FuL.Strain hardening behavior of linear friction welded joints between TC11 and TC17 dissimilar titanium alloys. Mater Sci Eng A. 2015;621:149–156. doi:10.1016/j.msea.2014.10.044
10.
SuY, LiW, ShenJ, . Comparing the local-global deformation mechanism in different friction stir welding sequences of Ti-4Al-0.005B titanium alloy T-joints. Mater Sci Eng A. 2021;823:141698. doi:10.1016/j.msea.2021.141698
11.
Anil KumarV, GuptaRK, ManwatkarSK, . Effect of prior and post-weld heat treatment on electron beam weldments of (α+β) titanium alloy Ti-5Al-3Mo-1.5 V. J Mater Eng Perform. 2016;25:2147–2156. doi:10.1007/s11665-016-2111-7
12.
SagarDBA, PardhuY, RaoMSK, . Strain hardening behavior of friction welded beta titanium alloy titan 1023 used for aeronautical applications. Mater Today Proc. 2022;57:687–692. doi:10.1016/j.matpr.2022.02.113
13.
Ballat-DurandD, BouvierS, RisbetM, . Multi-scale and multi-technic microstructure analysis of a linear friction weld of the metastable-β titanium alloy Ti-5Al-2Sn-2Zr-4Mo-4Cr (Ti17) towards a new post-weld heat treatment. Mater Charact. 2018;144:661–670. doi:10.1016/j.matchar.2018.08.013
14.
GarcíaJM, EsinVA, MorgeneyerTF.Strength, fatigue strength and toughness of dissimilar Ti17-Ti64 linear friction welded joints: effect of soft surface contamination and depletion of α precipitates. Mater Sci Eng A. 2021;799:139989. doi:10.1016/j.msea.2020.139989
15.
LiX, HeJ, JiY, . Study of the microstructure and fracture toughness of TC17 titanium alloy linear friction welding joint. Metals (Basel). 2019;9(4):430. doi:10.3390/met9040430
16.
ZhaoP, TaoY, ChenH, . Texture characteristics and fracture mechanism of linear friction welded joints of dissimilar titanium alloys after annealing. Mater Sci Eng A. 2023;866:144709. doi:10.1016/j.msea.2023.144709
17.
BruneseauxF, Aeby-GautierE, GeandierG, . In situ characterizations of phase transformations kinetics in the Ti17 titanium alloy by electrical resistivity and high temperature synchrotron X-ray diffraction. Mater Sci Eng A. 2008;476(1-2):60–68. doi:10.1016/j.msea.2007.04.072
18.
TaneM, OkudaY, TodakaY, . Elastic properties of single-crystalline ω phase in titanium. Acta Mater. 2013;61(20):7543–7554. doi:10.1016/j.actamat.2013.08.036
19.
ZhangR, ZhaoQ, ZhaoY, . Research progress on slip behavior of α-Ti under quasi-static loading: a review. Metals (Basel). 2022;12(10):1571. doi:10.3390/met12101571
20.
AhmedM, WexlerD, CasillasG, . Strain rate dependence of deformation-induced transformation and twinning in a metastable titanium alloy. Acta Mater. 2016;104:190–200. doi:10.1016/j.actamat.2015.11.026
21.
FengF, HuangS, MengZ, . Experimental study on tensile property of AZ31B magnesium alloy at different high strain rates and temperatures. Mater Des. 2014;57:10–20. doi:10.1016/j.matdes.2013.12.031
22.
AfrinN, ChenD, CaoX, . Strain hardening behavior of a friction stir welded magnesium alloy. Scr Mater. 2007;57(11):1004–1007. doi:10.1016/j.scriptamat.2007.08.001
23.
ZhuY, FanJ, LiZ, . Study of strain rate sensitivity exponent and strain hardening exponent of typical titanium alloys. Mater Today Commun. 2022;30:103060. doi:10.1016/j.mtcomm.2021.103060
24.
KocksUF, MeckingH.Physics and phenomenology of strain hardening: the FCC case. Prog Mater Sci. 2003;48(3):171–273. doi:10.1016/S0079-6425(02)00003-8
25.
WangW, DongZ, XuZ, . Local strain hardening behavior in a dissimilar metal welded joint with buttering layer of ultra-supercritical turbine rotor. Mater Sci Eng A. 2020;785:139379. doi:10.1016/j.msea.2020.139379
26.
ZhuM, XuanF.Effect of microstructure on strain hardening and strength distributions along a Cr-Ni-Mo-V steel welded joint. Mater Des. 2015;65:707–715. doi:10.1016/j.matdes.2014.09.076
27.
KocksUF, MeckingH.Physics and phenomenology of strain hardening: the FCC case. Prog Mater Sci. 2003;48(3):171–273. doi:10.1016/S0079-6425(02)00003-8
28.
TiamiyuAA, SzpunarJA, OdeshiAG.Strain rate sensitivity and activation volume of AISI 321 stainless steel under dynamic impact loading: grain size effect. Mater Charact. 2019;154:7–19. doi:10.1016/j.matchar.2019.05.027
29.
ZhuY, FanJ, LiZ, . Study of strain rate sensitivity exponent and strain hardening exponent of typical titanium alloys. Mater Today Commun. 2022;30:103060. doi:10.1016/j.mtcomm.2021.103060
30.
PilchakAL, WilliamsJC.Crystallography of fluted fracture in near-α titanium alloys. Metall Mater Trans A. 2010;41:22–25. doi:10.1007/s11661-009-0091-z
