This study showed that high-density nano-precipitates, which have not been observed before, formed in the carbon-enriched zone located 20 µm away from the fusion boundary of the dissimilar metal welds of Alloy 52M and A508 steel. The nano-precipitate, which was named as CrCx in this study, was in a rodlike shape and shorter than 30 nm. The atoms of CrCx were arranged as a face-centered cubic (FCC) crystal. The CrCx precipitates have a lattice parameter of 4.08 Å and a cube-on-cube orientation relationship with the austenitic matrix of Alloy 52M. The results will be of great benefit to the development of advanced dissimilar metal welds and new Ni-based alloys serviceable in a harsh environment.
DuPontJN.Microstructural evolution and high temperature failure of ferritic to austenitic dissimilar welds. Int Mater Rev. 2012 Jul 1; 57(4):208–234.
2.
WangHT, WangGZ, XuanFZ, . Local mechanical properties of a dissimilar metal welded joint in nuclear powersystems. Mater Sci Eng A. 2013 Apr 15; 568:108–117.
3.
KimJW, LeeK, KimJS, . Local mechanical properties of alloy 82/182 dissimilar weld joint between SA508 Gr.1a and F316 SS at RT and 320°C. J Nucl Mater. 2009; 384(3):212–221.
4.
HouJ, PengQJ, TakedaY, . Microstructure and mechanical property of the fusion boundary region in an alloy 182-low alloy steel dissimilar weld joint. J Mater Sci. 2010 Oct; 45(19):5332–5338.
5.
SubramanianM, GallerJ, DuPontJ, . Heterogeneous creep deformation in dissimilar metal welds (DMWs). Mater Sci Eng A. 2019 Mar 11; 749:1–13.
6.
LimaLI, SchvartzmanMM, FigueiredoCA, . Stress corrosion cracking behavior of alloy 182 weld in pressurized water reactor primary water environment at 325°C. Corrosion. 2011 Aug; 67(8):085004-1–085004-9.
7.
ChopraOK, SoppetWK, ShackWJ.Effects of alloy chemistry, cold work, and water chemistry on corrosion fatigue and stress corrosion cracking of nickel alloys and welds. Argonne (IL): Argonne National Lab (ANL); 2001 Apr 1.
8.
DongP, SongS, ZhangJ.Analysis of residual stress relief mechanisms in post-weld heat treatment. Int J Press Vessels Pip. 2014 Oct 1; 122:6–14.
9.
DongP, BrustFW.Welding residual stresses and effects on fracture in pressure vessel and piping components: a millennium review and beyond. J. Pressure Vessel Technol. 2000 Aug 1; 122(3):329–338.
10.
HelanderT, ÅgrenJ, NilssonJO.An experimental and theoretical investigation of diffusion across a joint of two multicomponent steels. ISIJ Int. 1997 Nov 15; 37(11):1139–1145.
11.
YouYY, ShiueRK, ShiueRH, . The study of carbon migration in dissimilar welding of the modified 9Cr-1Mo steel. J Mater Sci Lett. 2001 Aug; 20(15):1429–1432.
12.
NelsonTW, LippoldJC, MillsMJ.Investigation of boundaries and structures in dissimilar metal welds. Sci Technol Weld Joining. 1998 Oct 1; 3(5):249–255.
13.
HuangML, WangDL.Carbon migration in 5Cr-0.5Mo/21Cr-12Ni dissimilar metal welds. Metall Mater Trans A. 1998 Dec 1; 29(12):3037–3046.
14.
LiuFC, NelsonTW, McCrackenSL.Effect of post-weld heat treatment on microstructure and mechanical properties of dissimilar metal weld used in power plants. Metall Mater Trans A. 2019 Jun; 50(6):2826–2834.
15.
McCrackenSL, SmithRE.Behavior and hot cracking susceptibility of filler metal 52 M (ERNiCrFe-7A) overlays on cast austenitic stainless steel base materials. In: BöllinghausT, CrossCE, LippoldJC, editors. Inhot cracking phenomena in welds III. Berlin: Springer; 2011. p. 333–352.
16.
BeckittFR, ClarkBR.The shape and mechanism of formation of M23C6 carbide in austenite. Acta Metall. 1967 Jan 1; 15(1):113–129.
17.
TytkoD, ChoiPP, KlöwerJ, . Microstructural evolution of a Ni-based superalloy (617B) at 700°C studied by electron microscopy and atom probe tomography. Acta Mater. 2012 Feb 1; 60(4):1731–1740.
18.
SeguraIA, MurrLE, TerrazasCA, . Grain boundary and microstructure engineering of Inconel 690 cladding on stainless-steel 316L using electron-beam powder bed fusion additive manufacturing. J Mater Sci Technol. 2019 Feb 1; 35(2):351–367.
19.
LiS, LiK, CaiZ, . Behavior of M23C6 phase in Inconel 617B superalloy during welding. J Mater Process Technol. 2018 Aug 1; 258:38–46.
