A 3-D finite element model of rotary friction welding was developed using a viscoelastic Maxwell model. The thermal softening of the material was accounted for in the viscous part of the material model as well as in an additional friction model. The thermal and mechanical material data were adapted from existing data of tempering steel AISI 4140. The final model was used to predict rotary friction welding of shafts using three different parameter settings. The simulation results showed that the melt temperature was never exceeded at the faying surfaces, which is seen as a main characteristic of friction welding. Subsequent validation also demonstrated that the shortening of the specimen as well as the resulting flash geometry could be predicted successfully.
MidlingOT, GrongO.A process model for friction welding of Al–Mg–Si alloys and Al-SiC metal matrix composites–I. HAZ temperature and strain rate distribution. Acta Metall Mater. 1994; 42(5):1595–1609. doi: 10.1016/0956-7151(94)90369-7
2.
KesslerM, SuengerS, HauboldM, et al. Modeling of upset and torsional moment during inertia friction welding. J Mater Process Technol. 2016; 227:34–40. doi: 10.1016/j.jmatprotec.2015.07.024
3.
DonohueJJ.The friction welding advantage. Weld J. 2001; 80(5):30–34.
WangKK, LinW.Flywheel friction welding research. Weld J. 1974; 53(6):233–241.
6.
ISO Standard 15620. Welding – friction welding of metallic materials. 2019.
7.
SahinM, AkataHE.Joining with friction welding of plastically deformed steel. J Mater Process Technol. 2003; 142(1):239–246. doi: 10.1016/S0924-0136(03)00589-2
8.
Vill'VI.Friction welding of metals. Translated from Russian. New York (NY): Reinhold Publishing; 1962.
9.
EllisCR.Continuous drive friction welding of mild steel. Weld J. 1972; 51(4):183–197.
10.
BennettCJ, HydeTH, ShipwayPH.A transient finite element analysis of thermoelastic effects during inertia friction welding. Comput Mater Sci. 2011; 50(9):2592–2598.
11.
MoalA, MassoniE.Finite element simulation of the inertia welding of two similar parts. Eng Comput. 1995; 12(6):497–512.
12.
D'AlviseL.Development of a finite element model for the simulation of the inertia friction welding process between dissimilar materials [dissertation]. Paris: Ecole Nationale Superieure des Mines de Paris; 2002
13.
YangL.Modelling of the inertia welding of Inconel 718 [dissertation]. Birmingham: University of Birmingham; 2010
14.
BlackwellPL, BrooksJW, BatePS.Development of microstructure in isothermally forged nimonic alloy AP1. Mat Sci Techn. 1998; 14(11):1181–1188.
15.
SchmickerD, NaumenkoK, StrackeljanJ.A robust simulation of direct drive friction welding with a modified carreau fluid constitutive model. Comput Methods Appl Mech Eng. 2013; 265:186–194.
16.
SchmickerD, PaczullaS, NitzschkeS, et al. Experimental identification of flow properties of a s 355 structural steel for hot deformation processes. J Strain Anal Eng. 2015; 50(2):75–83.
17.
LoeheJ, LotzM, CannonM, et al. Application of optimal control algorithm to inertia friction welding process. IEEE Trans Control Syst Technol. 2012; 21(3):891–898.
18.
BergstromJ.Mechanics of solid polymers. Amsterdam: William Andrew; 2015.
19.
SchmidtH.Modelling the thermomechanical conditions in friction stir welding [dissertation]. Lyngby: Technical University of Denmark; 2004
CvernaF.ASM ready reference. Thermal properties of metals. Materials Park (OH): ASM International; 2002.
22.
SchmidtH, HattelJ, WertJ.An analytical model for the heat generation in friction stir welding. Model Simul Mater Sci. 2004; 12(1):143–157.
23.
MaalekianM, KozeschnikE, BrantnerHP, et al. Comparative analysis of heat generation in friction welding of steel bars. Acta Mater. 2008; 56(12):2843–2855.
24.
DoegeE, BehrensBA.Handbuch umformtechnik [Handbook metal forming]. Heidelberg: Springer; 2010.
