Wire arc additive manufacturing (WAAM) with better material utilisation efficiency and higher deposition rate was employed to fabricate bi-metallic structure (BMS) of non-stabilised austenitic stainless steel (SS904L), and solid solution strengthened Hastelloy C-276. The micrographs confirmed the existence of directionally elongated, columnar, and equi-axed dendrites in the BMS. Significant grain coarsening was observed in the re-melted layers. The tensile properties of Hastelloy C-276 and SS904L were comparable with wrought counterparts, while the bi-metallic interface sample fractured in the SS904L side. The presence of secondary phases and varying microstructure along the building direction is responsible for the anisotropy in mechanical properties. Microhardness results revealed the steep increase at the bi-metallic interface due to the dilution of elements between two materials.
TianY, ShenJ, HuS, Wire and arc additive manufactured Ti-6Al-4V/Al-6.25Cu dissimilar alloys by CMT-welding: effect of deposition order on reaction layer. Sci Technol Weld Join. 2019; 25(1):73–80. doi: 10.1080/13621718.2019.1629379
2.
WuB, QiuZ, PanZ, Enhanced interface strength in steel-nickel bimetallic component fabricated using wire arc additive manufacturing with interweaving deposition strategy. J Mater Sci Technol. 2020; 52:226–234. doi: 10.1016/j.jmst.2020.04.019
3.
ShakilM, AhmadM, TariqHN, Microstructure and hardness studies of electron beam welded Inconel 625 and stainless steel 304L. Vacuum. 2014; 110:121–126. doi: 10.1016/j.vacuum.2014.08.016
4.
ChangSW, RajeshRS, ChunKC, Microstructure and mechanical properties of hybrid laser-friction stir welding between AA6061-T6 Al alloy and AZ31 Mg alloy. J Mater Sci Technol. 2011; 27(3):199–204. doi: 10.1016/S1005-0302(11)60049-2
5.
MortensenA, SureshS.Functionally graded metals and metal-ceramic composites: Part 1 processing. Int Mater Rev. 1995; 40(6):239–265. doi: 10.1179/imr.1995.40.6.239
6.
AhsanMRU, TanvirANM, SeoGJ, Heat-treatment effects on a bimetallic additively-manufactured structure (BAMS) of the low-carbon steel and austenitic-stainless steel. Addit Manuf. 2020; 32:101036.
7.
RajanTPD, PillaiRM, PaiBC.Functionally graded Al–Al3Ni in situ intermetallic composites: fabrication and microstructural characterization. J Alloys Compd. 2008; 453(1-2):L4–L7. doi: 10.1016/j.jallcom.2006.11.181
8.
MahamoodRM, AkinlabiET, ShuklaM, Functionally graded material: an overview. Proceedings of the World Congress on Engineering, 2012; London.
9.
JunT.Development and application of functionally gradient materials, International Conference on Industrial Control and Electronics Engineering. IEEE. 2012: 1022–1025.
10.
ZhangB, JaiswalP, RaiR, Additive manufacturing of functionally graded material objects: a review. J Comput Inf. Sci Eng. 2018; 18(4):041002. doi: 10.1115/1.4039683
11.
KannanAR, ShanmugamNS, RajkumarV, Insight into the microstructural features and corrosion properties of wire arc additive manufactured super duplex stainless steel (ER2594). Mater Lett. 2020; 270:127680. doi: 10.1016/j.matlet.2020.127680
12.
DebRoyT, WeiHL, ZubackJS, Additive manufacturing of metallic components – process, structure and properties. Prog Mater Sci. 2018; 92:112–224. doi: 10.1016/j.pmatsci.2017.10.001
XiongJ, ZhangG, ZhangW.Forming appearance analysis in multi-layer single-pass GMAW-based additive manufacturing. Int J Adv Manuf Technol. 2015; 80(9-12):1767–1776. doi: 10.1007/s00170-015-7112-4
15.
DuraisamyR, KumarSM, KannanAR, Tribological performance of wire arc additive manufactured 347 austenitic stainless steel under unlubricated conditions at elevated temperatures. J Manuf Process. 2020; 56(A):306–321. doi: 10.1016/j.jmapro.2020.04.073
16.
CarrollBE, OtisRA, BorgoniaJP, Functionally graded material of 304L stainless steel and Inconel 625 fabricated by directed energy deposition: characterization and thermodynamic modeling. Acta Mater. 2016; 108:46–54. doi: 10.1016/j.actamat.2016.02.019
17.
WeiC, SunZ, ChenQ, Additive manufacturing of horizontal and 3D functionally graded 316L/Cu10Sn components via multiple material selective laser melting. J Manuf Sci Eng. 2019; 141(8):081014. doi: 10.1115/1.4043983
18.
SuY, ChenB, TanC, Influence of composition gradient variation on the microstructure and mechanical properties of 316L/inconel 718 functionally graded material fabricated by laser additive manufacturing. J Mater Process Technol. 2020; 283:116702. doi: 10.1016/j.jmatprotec.2020.116702
19.
TumerM, KarahanT, MertT.Evaluation of microstructural and mechanical properties of dissimilar Inconel 625 nickel alloy–UNS S32205 duplex stainless steel weldment using MIG welding. Weld World. 2020; 64:21–35. doi: 10.1007/s40194-019-00825-x
20.
KumarKG, RamkumarKD, ArivazhaganN.Characterization of metallurgical and mechanical properties on the multi-pass welding of Inconel 625 and AISI 316L. J Mech Sci Technol. 2015; 29:1039–1047. doi: 10.1007/s12206-014-1112-4
21.
DomashenkovA, PlotnikovaA, MovchanI, Microstructure and physical properties of a Ni/Fe-based superalloy processed by selective laser melting. Addit Manuf. 2017; 15:66–77.
22.
AbeT, SasaharaH.Dissimilar metal deposition with a stainless steel and nickel-based alloy using wire and arc-based additive manufacturing. Precis Eng. 2016; 45:387–395. doi: 10.1016/j.precisioneng.2016.03.016
23.
AhsanMRU, TanvirANM, RossT, Fabrication of bimetallic additively manufactured structure (BAMS) of low carbon steel and 316L austenitic stainless steel with wire + arc additive manufacturing. Rapid Prototyp J. 2019; 26(3):519–530. doi: 10.1108/RPJ-09-2018-0235
24.
ChandrasekaranS, HariS, AmirthalingamM.Wire arc additive manufacturing of functionally graded material for marine risers. Mater Sci Eng. A. 2020; 792:139530. doi: 10.1016/j.msea.2020.139530
25.
ZhangX, ChenY, LiouF.Fabrication of SS316L-IN625 functionally graded materials by powder-fed directed energy deposition. Sci Technol Weld Join. 2019; 24(5):504–516. doi: 10.1080/13621718.2019.1589086
26.
PrabuSS, RamkumarKD, ArivazhaganN.Investigation on the fusion zone microstructures and mechanical integrity of AISI 904L and Inconel 625 weld joints. Mater Res Express. 2019; 6(8):086540. doi: 10.1088/2053-1591/ab1883
27.
SharmaS, TaiwadeRV, VashishthaH.Effect of continuous and pulsed current gas tungsten arc welding on dissimilar weldments between Hastelloy C-276/AISI 321 austenitic stainless steel. J Mater Eng Perform. 2017; 26:1146–1157. doi: 10.1007/s11665-017-2570-5
28.
WuW, XueJ, ZhangZ, Comparative study of 316L depositions by two welding current processes. Mater Manuf Processes. 2019; 34(13):1502–1508. doi: 10.1080/10426914.2019.1643473
29.
GuoY, PanH, RenL, Microstructure and mechanical properties of wire arc additively manufactured AZ80M magnesium alloy. Mater Lett. 2019; 247:4–6. doi: 10.1016/j.matlet.2019.03.063
30.
ManikandanM, ArivazhaganN, RaoMN, Microstructure and mechanical properties of alloy C-276 weldments fabricated by continuous and pulsed current gas tungsten arc welding techniques. J Manuf Process. 2014; 16(4):563–572. doi: 10.1016/j.jmapro.2014.08.002
31.
QiuZ, WuB, ZhuH, Microstructure and mechanical properties of wire arc additively manufactured Hastelloy C276 alloy. Mater Des. 2020; 195:109007. doi: 10.1016/j.matdes.2020.109007
32.
DindaGP, DasguptaAK, MazumderJ.Texture control during laser deposition of nickel-based superalloy. Scr Mater. 2012; 67(5):503–506. doi: 10.1016/j.scriptamat.2012.06.014
33.
WangL, SuoY, LiangZ, Effect of titanium powder on microstructure and mechanical properties of wire + arc additively manufactured Al-Mg alloy. Mater Lett. 2019; 241:231–234. doi: 10.1016/j.matlet.2019.01.117
34.
KannanAR, ShanmugamNS, VendanSA.Effect of cold metal transfer process parameters on microstructural evolution and mechanical properties of AISI 316L tailor welded blanks. Int J Adv Manuf Technol. 2019; 103:4265–4282. doi: 10.1007/s00170-019-03856-2
35.
LiG, HuangJ, WuY.An investigation on microstructure and properties of dissimilar welded Inconel 625 and SUS 304 using high-power CO2 laser. Int J Adv Manuf Technol. 2015; 76:1203–1214. doi: 10.1007/s00170-014-6349-7
36.
SunY, LiX, YuX, Fracture Morphologies of advanced high strength steel during deformation. Acta Metall Sin (Engl Lett.)2014; 27:101–106. doi: 10.1007/s40195-014-0032-8
37.
RamkumarKD, NarenthiranA, KonjentiA, Effect of low energy laser shock peening on the mechanical integrity of Hastelloy C-276 welds. J Mater Process Technol. 2019; 274:116296. doi: 10.1016/j.jmatprotec.2019.116296
