The diffusion bonding of conventional alloy Ti–6Al–4V (Ti-64) and composites of this alloy with 10% of TiC or TiB fabricated using blended elemental powder metallurgy was successfully carried out at 850–1000°C, with a holding time of 60 min under 0.7–1.5 MPa pressure. The metallographic and electron backscattered diffraction studies as well as the bending and microhardness tests across the bonds are presented as the evidence of joint integrity. The selected experimental parameters do not cause undesirable structural changes (degradation) in the base metals adjacent to the bond interface. Particle reinforcement at ∼10% did not appear to modify bonding parameters when compared to the unreinforced Ti-64 alloy.
IvasishinOM, MarkovskyPE, SavvakinDG, Multi-layered structures of Ti-6Al-4V alloy and TiC and TiB composites on its base fabricated using blended elemental powder metallurgy. J MaterProces Tech. 2019; 269:172–181. doi: 10.1016/j.jmatprotec.2019.02.006
3.
El-SoudaniSM, YuKO, CristEM, Optimization of blended-elemental powder based titanium alloy extrusions for aerospace applications. Metall Mater Trans. 2013; A44. doi: 10.1007/s11661-012-1437-5.
4.
PrikhodkoSV, MarkovskyPE, SavvakinDG, Thermo-mechanical treatment of titanium based layered structures fabricated by blended elemental powder metallurgy. Mater Sci Forum. 2018; 941:1384–1390. doi: 10.4028/www.scientific.net/MSF.941.1384
5.
BacheMR, TuppenSJ, VoiceWE, Novel low cost procedure for fabrication of diffusion bonds in Ti 6/4. Mater SciTech. 2009; 25(1):39–49.
6.
RajakumarS, BalasubramanianV.Diffusion bonding of titanium and AA 7075 aluminium alloy dissimilar joints—process modelling and optimization using desirability approach. Int J AdvManuffacturing Tech. 2016; 86:1095–1112. doi: 10.1007/s00170-015-8223-7
7.
GhoshSK, ChatterjeeS.On the direct diffusion bonding of titanium alloy to stainless steel. Mater Manufacturing Proc. 2010; 25:1317–1323. doi: 10.1080/10426914.2010.520793
8.
DunfordDV, WisbeyA.Diffusion bonding of advanced aerospace metallic. Mat Res SocSympProc. 1993; 314:39–50. doi: 10.1557/PROC-314-39
9.
TuppenSJ, BacheMR, VoiceWE.A fatigue assessment of dissimilar titanium alloy diffusion bonds. Int J Fatigue. 2005; 27:651–658. doi: 10.1016/j.ijfatigue.2004.11.004
10.
ElrefaeyA, TillmannW.Solid state diffusion bonding of titanium to steel using a copper base alloy as interlayer. J Mater Proc Tech. 2009; 209:2746–2752. doi: 10.1016/j.jmatprotec.2008.06.014
11.
MoDF, SongTF, FangYJ, A review on diffusion bonding between titanium alloys and Stainless Steels. Adv Mater Sci Eng. 2018; 15; DOI:10.1155/2018/8701890.
12.
NicholasMG.Joining processes – introduction to brazing and diffusion bonding. London: Kluwer Academic Publishers; 1998.
13.
AshworthMA, JacobsMH, DaviesS.Basic mechanisms and interface reactions in HIP diffusion bonding. Mater Design. 2000; 21:351–358. doi: 10.1016/S0261-3069(99)00088-6
14.
PedersonR.Microstructure and phase transformation of Ti–6Al–4 V. Licentiate Thesis, Lulea University of Technology; 2002.
DaviesP, JohalA, DaviesH, Powder interlayer bonding of titanium alloys: Ti-6Al-2Sn-4Zr-6Mo and Ti-6Al-4V. Int J Adv Manuf Tech. 2019; 103:441–452. doi: 10.1007/s00170-019-03445-3
17.
CarriónJG.A study of low temperature diffusion bonding processing of TI-6AL-4V alloy for reducing costs in SPF/DB structures. RTO-MP-069 (II), cost effective application of titanium alloys in military platforms, Loen, Norway, 7–11 May 2001.
18.
ShirzadiAA, WallachER.New approaches for the TLP diffusion bonding of aluminium metal matrix composites. Mater Sci Tech. 1997; 13(2):135–142. doi: 10.1179/mst.1997.13.2.135
