Solidification cracking can occur when neighbouring columnar grains are separated by tensile strain perpendicular to the grain boundary. In this study, a method to determine the tensile strain causing solidification cracking in welding was developed. A two-dimensional model was built to calculate the tensile strain perpendicular to the grain boundary during solidification, considering heat transfer, stress and strain evolution. The grain boundary direction was determined by calculating the temperature gradient and then the tensile strain causing solidification cracking was obtained by calculating the strain in the direction perpendicular to the grain boundary using strain transformation rule. This method to determine tensile strain causing solidification cracking can provide reference for future numerical and experimental studies on solidification cracking.
KouS.A criterion for cracking during solidification. Acta Mater. 2015; 88:366–374. doi: 10.1016/j.actamat.2015.01.034
4.
RappazM, DrezetJM, GremaudM.A new hot-tearing criterion. Metall Mater Trans A. 1999; 30(2):449–455. doi: 10.1007/s11661-999-0334-z
5.
GoodwinGM.Test methods for evaluation hot cracking: review and perspective. Proc United States–Japan Symp Adv Weld Metal. 1990; 1:59–78.
6.
KouS.Solidification and liquation cracking issues in welding. Jom. 2003; 55(6):37–42. doi: 10.1007/s11837-003-0137-4
7.
HouldcroftPT.A simple cracking test for use with argon-arc welding. Br Weld J. 1955; 2(10):471–475.
8.
SavageWF.The varestraint test. Weld J. 1965; 44:433s–442s.
9.
OsukiT, YonemuraM, OgawaK, Verification of numerical model to predict microstructure of austenitic stainless steel weld metal using synchrotron radiation and trans varestraint testing. Sci Technol Weld Joi. 2006; 11(1):33–42. doi: 10.1179/174329306X77074
10.
AucottL, HuangD, DongHB, Initiation and growth kinetics of solidification cracking during welding of steel. Sci Rep. 2017; 7:40255. doi: 10.1038/srep40255
11.
S AA, EB AM, Hanafy M. Effect of welding parameters on hot cracking susceptibility of alloy 800. Quart J Jpn Weld Soc. 1994; 12(3):335–341. doi: 10.2207/qjjws.12.335
12.
WangX, LuF, WangHP, Mechanical constraint intensity effects on solidification cracking during laser welding of aluminum alloys. J Mater Process Tech. 2015; 218:62–70. doi: 10.1016/j.jmatprotec.2014.11.037
WangX, LuF, WangHP, Mechanical constraint intensity effects on solidification cracking during laser welding of aluminum alloys. J Mater Process Tech. 2015; 218:62–70. doi: 10.1016/j.jmatprotec.2014.11.037
15.
YangPY, DongP, ZhangJ, A hot-cracking mitigation technique for welding high-strength aluminum alloy. Weld J New York. 2000; 79(1):9-s.
16.
SendaT, MatsudaF, TakanoG, Fundamental investigations on solidification crack susceptibility for weld metals with Trans-Varestraint test. Trans Jpn Weld Soc. 1971; 2(2):141–162.
17.
ArataY, MatsudaF, NakagawaH, Solidification crack susceptibility in weld metals of fully austenitic stainless steels (Report III): effect of strain rate on cracking threshold in weld metal during solidification. Trans JWRI. 1977; 6(2):197–206.
18.
SoysalT, KouS.A simple test for assessing solidification cracking susceptibility and checking validity of susceptibility prediction. Acta Mater. 2018; 143:181–197. doi: 10.1016/j.actamat.2017.09.065
19.
FengZ.A computational analysis of thermal and mechanical conditions for weld metal solidification cracking. Weld World. 1994; 33:340–340.
20.
MatsudaF, NakagawaH, NakataK, Quantitative evaluation of solidification brittleness of weld metal during solidification by means of in-situ observation and measurement (report I): development of the MISO technique (materials, metallurgy & weldability). Trans JWRI. 1983; 12(1):65–72.
21.
YadaiahN, BagS.Development of egg-configuration heat source model in numerical simulation of autogenous fusion welding process. Int J Therm Sci. 2014; 86:125–138. doi: 10.1016/j.ijthermalsci.2014.06.032
22.
EjærHG, MoA.ALSPEN-A mathematical model for thermal stresses in direct chill casting of aluminum billets. Metall Mater Trans B. 1990; 21(6):1049–1061. doi: 10.1007/BF02670275
23.
M'HamdiM, MoA, FjærHG.Tearsim: a two-phase model addressing hot tearing formation during aluminum direct chill casting. Metall Mater Trans A. 2006; 37(10):3069–3083. doi: 10.1007/s11661-006-0188-6
24.
NicolliLC, MoA, M'HamdiM.Modeling of macrosegregation caused by volumetric deformation in a coherent mushy zone. Metall Mater Trans A. 2005; 36(2):433–442. doi: 10.1007/s11661-005-0314-x
25.
FarupI, MoA.Two-phase modeling of mushy zone parameters associated with hot tearing. Metall Mater Trans A. 2000; 31(5):1461–1472. doi: 10.1007/s11661-000-0264-2
26.
KurzW, FisherDJ.Fundamentals of solidification. 4th ed.Aedermannsdorf: Trans Tech Publications; 1998, pp. 234–235.
27.
LiuJ, KouS.Crack susceptibility of binary aluminum alloys during solidification. Acta Mater. 2016; 110:84–94. doi: 10.1016/j.actamat.2016.03.030
28.
MatsudaF, NakagawaH, NakataK, The VDR cracking test for solidification crack susceptibility on weld metals and its application to aluminum alloys (materials, metallurgy, weldability). Trans JWRI. 1979; 8(1):85–95.
29.
ConiglioN, CrossCE.Mechanisms for solidification crack initiation and growth in aluminum welding. Metall Mater Trans A. 2009; 40(11):2718–2728. doi: 10.1007/s11661-009-9964-4
