Cold spray (CS) is a new solid state coating technique that has attracted considerable attention as it is quite suitable for mass production of metallic materials or metal matrix composites. More recently, cold spray additive manufacturing (CSAM) has been proposed to fabricate/repair components or produce welding joint. However, inherently deficient in ductility/plasticity of CSAMed materials limits its application. Therefore, many hybrid processes have been proposed to further explore CS, which can be grouped together as ‘cold spray +’ hybrid processes (laser, shot peening and friction stir processing). This review will summarise the state-of-the-art of the ‘cold spray +’ processes to show their abilities and their effectiveness. Recommendations for further research and development have been incorporated to help widespread the process.
LechP.The science and engineering of thermal spray coatings. 2nd ed. Chichester: John Wiley and Sons Ltd.; 2008; ISBN: 978-0-471-49049-4.
2.
LiWY.Study on the effect of particle parameters on deposition behavior, microstructure evolution and properties in cold spraying. Xi'an: Xi'an Jiaotong University; 2005; 2–3.
3.
VilardellAM, CincaN, ConcustellA, Cold spray as an emerging technology for biocompatible and antibacterial coatings: state of art. J Mater Sci. 2015; 50(13):4441–4462.
LiWY, LiaoHL, LiCJ, On high velocity impact of micro-sized metallic particles in cold spraying. Appl Surf Sci. 2006; 253(5):2852–2862.
6.
YinS, CavaliereP, AldwellB, Cold spray additive manufacturing and repair: fundamentals and applications. Addit Manuf. 2018; 21:628–650.
7.
KreyeH, StoltenhoffT.Cold spraying-a study of process and coating characteristics. In: Proceed Int Therm Spray Conf. 2000; 2(6):614–615.
8.
StoltenhoffT, KreyeH, RichterHJ.An analysis of the cold spray process and its coatings. J Therm Spray Techn. 2002; 11(4):542–550.
9.
StoltenhoffT, BorchersC, GärtnerF, Microstructures and key properties of cold-sprayed and thermally sprayed copper coatings. Surf Coat Tech. 2006; 200(16):4947–4960.
10.
SunB.The development of PCS series cold spraying system and coating performance research. In: Conf cold spray Techn Res Appl. Xi'an; 2017; 17–19.
11.
HussainT.Cold spraying of titanium: a review of bonding mechanisms, microstructure and properties. Key Eng Mates. 2013; 533:53–90.
12.
PattisonJ, CelottoS, MorganR, Cold gas dynamic manufacturing: a non-thermal approach to freeform fabrication. Int J Mach Tools Manuf. 2007; 47:627–634.
13.
MorganRH, SutcliffeCJ, PattisonJ, Cold gas dynamic manufacturing-a new approach to near-net shape metal component fabrication. Mater Res Soci. 2003; 758:73–84.
14.
PathakS, SahaGC.Development of sustainable cold spray coatings and 3D additive manufacturing components for repair/manufacturing applications: a critical review. Coatings. 2017; 7(8):122–147.
15.
AjdelsztajnL, JodoinB, KimGE, Cold spray deposition of nanocrystalline aluminum alloys. Metall Mater Trans A. 2005; 36(3):657–666.
16.
LiCJ, LiWY, WangYY.Formation of metastable phases in cold sprayed soft metallic deposit. Surf Coat Tech. 2005; 198:469–473.
FlynnJM, ShokraniA, NewmanST, Hybrid additive and subtractive machine tools – research and industrial developments. Int J Mach Tool Manu. 2016; 101:79–101.
19.
GuoXP, ZhangG, LiWY, Investigation of the microstructure and tribological behavior of cold sprayed tin-bronze based composite coatings. Appl Surf Sci. 2009; 255(6):3822–3828.
20.
LiWY, ZhangCJ, LiaoHL, Characterizations of cold-sprayed nickel-alumina composite coating with relatively large nickel-coated alumina powder. Surf Coat Tech. 2008; 202(19):4855–4860.
21.
YinS, XieYC, CizekJ, Advanced diamond-reinforced metal matrix composites via cold spray: properties and deposition mechanism. Compos Part B-Eng. 2017; 113:44–54.
22.
GardonM, LatorreA, TorrellM, Cold gas spray titanium coatings onto a biocompatible polymer. Mater Lett. 2013; 106:97–99.
23.
PiercyB, AllenC, GulláAF.Ta and Ti anti-passivation interlayers for oxygen-evolving anodes produced by cold gas spray. J Therm Spray Tech. 2015; 24(4):702–710.
24.
YinS, LiWY, SongB, Deposition of FeCoNiCrMn high entropy alloy (HEA) coating via solid-state cold spraying. J Mater Sci Techn. 2019; 35(6):1003–1007.
25.
LiWY, AssadiH, GaertnerF, A review of advanced composite and nanostructured coatings by solid-state cold spraying process. Crit Rev Solid State. 2018; 42:1–48.
26.
MoridiA, Hassani-GangarajSM, GuaglianoM, Cold spray coating: review of material systems and future perspectives. Sur Eng. 2014; 30(6):369–395.
27.
MillerSA, DaryFC, GaydosM, Methods of manufacturing large-area sputtering targets by cold spray. USA Patent Application. No. 8703233 B2; 2014.
28.
EasonPD, FewkesJA, KennettSC, On the characterization of bulk copper produced by cold gas dynamic spray processing in as fabricated and annealed conditions. Mat Sci Eng A. 2011; 528:8174–8178.
29.
VillafuerteJ.Recent trends in cold spray technology: looking at the future. Surf Eng. 2010; 26:393–394.
30.
CadneyS, BrochuM, RicherP, Cold gas dynamic spraying as a method for freeforming and joining materials. Surf Coat Tech. 2008; 202(12):2801–2806.
LiWY, YangK, YinS, Solid-state additive manufacturing and repairing by cold spraying: A review. J Mater Sci Technol. 2018; 34:440–457.
33.
LiWY, LiCJ.Optimal design of a novel cold spray gun nozzle at a limited space. J Therm Spray Techn. 2005; 14(3):391–396.
34.
BuhlS, BreuningerP, AntonyukS.Optimization of a Laval nozzle for energy-efficient cold spraying of microparticles. Mater Manuf Process. 2018; 33(2):115–122.
35.
TangW.The effects of two gas flow streams with initial temperature and pressure differences in cold spraying nozzle. Surf Coat Tech. 2014; 240(7):86–95.
36.
BhattiproluVS, JohnsonKW, OzdemirOC, Influence of feedstock powder and cold spray processing parameters on microstructure and mechanical properties of Ti-6Al-4V cold spray depositions. Surf Coat Tech. 2018; 335:1–12.
37.
JodoinB, AjdelsztajnL, SansoucyE, Effect of particle size, morphology, and hardness on cold gas dynamic sprayed aluminum alloy coatings. Surf Coat Tech. 2006; 201(6):3422–3429.
38.
KhunNW, TanAWY, BiKJW, Effects of working gas on wear and corrosion resistances of cold sprayed Ti-6Al-4V coatings. Surf Coat Tech. 2016; 302:1–12.
39.
HenaoJ, ConcustellA, CanoIG, Influence of cold gas spray process conditions on the microstructure of Fe-based amorphous coatings. J Alloy Compd. 2015; 622:995–999.
40.
WongW, IrissouE, RyabininAN, Influence of helium and nitrogen gases on the properties of cold gas dynamic sprayed pure titanium coatings. J Therm Spray Techn. 2011; 20(1–2):213–226.
41.
SuoX, YinS, PlancheMP, Strong effect of carrier gas species on particle velocity during cold spray processes. Surf Coat Tech. 2015; 268:90–93.
42.
SunW, TanAWY, KhunNW, Effect of substrate surface condition on fatigue behavior of cold sprayed Ti6Al4V coatings. Surf Coat Tech. 2017; 320:452–457.
43.
YinS, MeyerM, LiW, Gas flow, particle acceleration, and heat transfer in cold spray: a review. J Therm Spray Techn. 2016; 25(5):1–23.
44.
LiWY, ZhangDD, HuangCJ, Modelling of impact behaviour of cold spray particles: review. Surf Eng. 2014; 30(5):299–308.
45.
LeeC, KimJ.Microstructure of kinetic spray coatings: a review. J Therm Spray Techn. 2015; 24(4):592–610.
46.
LuoXT, LiCX, ShangFL, High velocity impact induced microstructure evolution during deposition of cold spray coatings: a review. Surf Coat Tech. 2014; 254(10):11–20.
47.
KimJ, LeeC.Correlation of impact conditions, interface reactions, microstructural evolution, and mechanical properties in kinetic spraying of metals: a review. J Therm Spray Techn. 2016; 25(8):1461–1489.
48.
LiWY, ZhangC, GuoX, Ti and Ti-6Al-4V coatings by cold spraying and microstructure modification by heat treatment. Adv Eng Mater. 2007; 9(5):418–423.
49.
LiN, LiWY, YangXW, Corrosion characteristics and wear performance of cold sprayed coatings of reinforced Al deposited onto friction stir welded AA2024-T3 joints. Surf Coat Tech. 2018; 349:1069–1076.
50.
AttarH, PrashanthKG, ZhangLC, Effect of powder particle shape on the properties of in situ Ti-Tib composite materials produced by selective laser melting. J Mater Sci Technol. 2015; 31:1001–1005.
51.
CasatiR, LemkeJ, VedaniM.Microstructure and fracture behavior of 316L austenitic stainless steel produced by selective laser melting. J Mater Sci Technol. 2016; 32:738–744.
52.
MazumderJ, DuttaD, KikuchiN, Closed loop direct metal deposition: art to part. A Ghosh Opt Laser Eng. 2000; 34:397–414.
53.
RaoelisonRN, XieY, SapanathanT, Cold gas dynamic spray technology: a comprehensive review of processing conditions for various technological developments till to date. Additive Manuf. 2018; 19:134–159.
54.
JahediMZ, ZahiriS, GuliziaS, Direct manufacturing of titanium parts by cold spray. Mater Sci Forum. 2009; 618–619:505–508.
RaoelisonRN, VerdyC, LiaoH.Cold gas dynamic spray additive manufacturing today: deposit possibilities, technological solutions and viable applications. Mater Design. 2017; 133:266–287.
57.
CormierY, DupuisP, JodoinB, Pyramidal fin arrays performance using streamwise anisotropic materials by cold spray additive manufacturing. J Therm Spray Techn. 2016; 25(1–2):170–182.
58.
CormierY, DupuisP, FarjamA, Additive manufacturing of pyramidal pin fins: Height and fin density effects under forced convectio. Int J Heat Mass Transfer. 2014; 75:235–244.
59.
CormierY, DupuisP, JodoinB, Net shape fins for compact heat exchanger produced by cold spray. J Therm Spray Techn. 2013; 22(7):1210–1221.
ChampagneV, HelfritchD.The unique abilities of cold spray deposition. Int Mater Rev. 2016; 61(7):437–455.
62.
LuoXT, YangGJ, LiCJ, High strain rate induced localized amorphization in cubic BN/NiCrAl nanocomposite through high velocity impact. Scr. Mater. 2011; 65:581–584.
63.
SovaA, GrigorievS, OkunkovaA, Potential of cold gas dynamic spray as additive manufacturing technology. Int J Adv Manuf Tech. 2013; 69(9):2269–2278.
64.
SovaA, PervushinD, SmurovI.Development of multimaterial coatings by cold spray and gas detonation spraying. Surf Coat Tech. 2010; 205(4):1108–1114.
65.
SchorrBS, SteinKJ, Characterization of thermal spray coatings. Wear. 1999; 42(2-3):93–100.
66.
KimHJ, LeeCH, HwangSY.Fabrication of WC-Co coatings by cold spray deposition. Surf Coat Tech. 2005; 191(2-3):335–340.
67.
SteenkisteTHV, SmithJR, TeetsRE.Aluminum coatings via kinetic spray with relatively large powder particles. Surf Coat Tech. 2002; 154(2-3):237–252.
68.
LimaRS, KucukA, BerndtCC, Deposition efficiency, mechanical properties and coating roughness in cold-sprayed titanium. J Mater Sci Lett. 2002; 21(21):1687–1689.
69.
MacdonaldD, FernándezR, DelloroF, Cold spraying of armstrong process titanium powder for additive manufacturing. J Therm Spray Techn. 2017; 26(4):598–609.
AstaritaA, CoticelliF, PriscoU.Repairing of an engine block through the cold gas dynamic spray technology. Mat Res. 2016; 19(6):1226–1231.
72.
KimDY, ParkYW.Weldability evaluation and tensile strength estimation model for aluminum alloy lap joint welding using hybrid system with laser and scanner head. Trans Nonferrous Met Soc China. 2012; 22:s596–s604.
73.
FridlyanderIN, SisterVG, GrushkoOE, Aluminum alloys: promising materials in the automotive industry. Met Sci Heat Treat. 2002; 44:365–370.
74.
KalitaSJ.Microstructure and corrosion properties of diode laser melted friction stir weld of aluminum alloy 2024 T351. Appl Surf Sci. 2011; 257:3985–3997.
75.
BorrisutthekulR, MiyashitaY, MutohY.Dissimilar material laser welding between magnesium alloy AZ31B and aluminum alloy A5052-O. Sci Technol Adv Mat. 2005; 6(2):199–204.
76.
YanS, NieY, ZhuZ, Characteristics of microstructure and fatigue resistance of hybrid fiber laser-MIG welded Al-Mg alloy joints. Appl Surf Sci. 2014; 298:12–18.
77.
GaoM, ChenC, MeiS, Parameter optimization and mechanism of laser-arc hybrid welding of dissimilar Al alloy and stainless steel. Int J Adv Manuf Tech. 2014; 74(1–4):199–208.
78.
BangHS, BangHS, SongHJ, Joint properties of dissimilar Al 6061-T6 aluminum alloy/Ti-6%Al-4%V titanium alloy by gas tungsten arc welding assisted hybrid friction stir welding. Mater Design. 2013; 51(5):544–551.
79.
ChangWS, RajeshSR, ChunCK, Microstructure and mechanical properties of hybrid laser-friction stir welding between AA6061-T6 Al alloy and AZ31 Mg alloy. J Mater Sci Technol. 2011; 27(3):199–204.
80.
ChampagneJVK, ChampagneVKIII, DudleyMA.Method to join dissimilar materials by cold spray process. USA Patent Application. No. 0089750 A1; 2016.
81.
FuSL, LiCX, WeiYK, Novel method of aluminum to copper bonding by cold spray. J Therm Spray Techn. 2018; 27:624–640.
82.
LeeJG, KimDY, KangB, Nickel-copper hybrid electrodes self-adhered onto a silicon wafer by supersonic cold-spray. Acta Mater. 2015; 93:156–163.
83.
LuanTM, GuoWB, YangSH, Effect of intermetallic compounds on mechanical properties of copper joints ultrasonic-soldered with Sn-Zn alloy. J Mater Process Tech. 2017; 248:123–129.
84.
NieHJ, LiH, LongWM, Brazing process and joint properties of eutectic contact reaction between magnesium alloy and steel using cold sprayed copper coating as the intermediate layer. J Weld. 2017; 37(7):83–87. (in Chinese).
85.
HePL, ChengFJ, QiSM, Study on medium temperature brazing hybrid cold spraying of 5083 aluminum alloy using Zn powder. Mate Review. 2017; 31(2):52–55. (in Chinese).
86.
MishraRS, MaZY.Friction stir welding and processing II. Mater Sci Eng R Reports. 2005; 50(1):1–78.
87.
NandanR, DebRoyT, BhadeshiaHKDH.Recent advances in friction-stir welding - process, weldment structure and properties. Prog Mater Sci. 2008; 53:980–1023.
88.
PadhyGK, WuCS, GaoS.Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: a review. J Mater Sci Technol. 2018; 34(1):1–38.
89.
SimarA, BréchetY, MeesterB, Integrated modeling of friction stir welding of 6xxx series Al alloys: process, microstructure and properties. Prog Mater Sci. 2012; 57:95–183.
90.
ChampagneVK, WestMK, RokniMR, Joining of cast ZE41A Mg to wrought 6061 Al by the cold spray process and friction stir welding. J Therm Spray Techn. 2016; 25(1-2):143–159.
91.
VoP, IrissouE, LegouxJG, Mechanical and microstructural characterization of cold-sprayed Ti-6Al-4V after heat treatment. J Therm Spray Techn. 2013; 22(6):954–964.
92.
HuangRZ, MaWH, FukanumaH.Development of ultra-strong adhesive strength coatings using cold spray. Surf Coat Tech. 2014; 258:832–841.
93.
TanWY, SunW, PhangYP, Effects of traverse scanning speed of spray nozzle on the microstructure and mechanical properties of cold-sprayed Ti6Al4V coatings. J Therm Spray Techn. 2017; 26(7):1484–1497.
94.
DeckerMK, NeiserRA, GilmoreD, Microstructure and properties of cold spray nickel. In: Int Therm Spray Conf. Singapore: ASM International; 2001:433–439.
95.
LiWY, GuoXP, VerdyC, Improvement of microstructure and property of cold-sprayed Cu-4at.%Cr-2at.%Nb alloy by heat treatment. Scripta Mater. 2006; 55(4):327–330.
96.
RenYQ, KingPC, YangYS, Characterization of heat treatment-induced pore structure changes in cold sprayed titanium. Mater Charact. 2017; 132:69–75.
97.
LiWY, LiCJ, LiaoHL.Effect of annealing treatment on the microstructure and properties of cold-sprayed Cu coating. J Therm Spray Techn. 2006; 15(2):206–211.
98.
YangK, LiWY, YangXW, Effect of heat treatment on the inherent anisotropy of cold sprayed copper deposits. Surf Coat Tech. 2018; 350:519–530.
99.
RokniMR, WidenerCA, ChampagneVK, The effects of heat treatment on 7075 Al cold spray deposits. Surf Coat Tech. 2017; 310:278–285.
100.
RokniRM, WidenerAC, OzdemirCO, Microstructure and mechanical properties of cold sprayed 6061 Al in As-sprayed and heat treated condition. Surf Coat Tech. 2017; 309:641–650.
101.
SunJF, HanY, CuiK.Innovative fabrication of porous titanium coating on titanium by cold spraying and vacuum sintering. Mater Lett. 2008; 62:3623–3625.
102.
XuW, BrandtM, SunS, Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition. Acta Mater. 2015; 85:74–84.
103.
BeeseAM, CarrollBE.Review of mechanical properties of Ti-6Al-4V made by laser-based additive manufacturing using powder feedstock. JOM. 2016; 68(3):724–734.
104.
LewandowskiJJ, SeifiM.Metal additive manufacturing: a review of mechanical properties. Annu Rev Mater Res. 2016; 46(1):151–186.
105.
ZhongHZ, QianM, HouW, The beta phase evolution in Ti-6Al-4V additively manufactured by laser metal deposition due to cyclic phase transformations. Mater Lett. 2018; 216:50–53.
106.
CaoF, ZhangT, RyderMA, A review of the fatigue properties of additively manufactured Ti-6Al-4V. JOM. 2018; 70(12):1–9.
107.
KromerR, CostilS, CormierJ, Laser surface patterning to enhance adhesion of plasma sprayed coatings. Surf Coat Tech. 2015; 278:171–182.
108.
KromerR, VerdyC, CostilS, Laser surface texturing to enhance adhesion bond strength of spray coatings - cold spraying, wire-arc spraying, and atmospheric plasma spraying. Surf Coat Tech. 2018; 352:642–653.
BirtAM, ChampagneVK, SissonRD, Statistically guided development of laser-assisted cold spray for microstructural control of Ti-6Al-4V. Mat Sci Eng A. 2017; 48(4):1931–1943.
111.
BirtAM, ChampagneVK, SissonRD, Microstructural analysis of cold-sprayed Ti-6Al-4V at the micro- and nano-scale. J Therm Spray Techn. 2015; 24(7):1277–1288.
112.
PertonM, CostilS, WongW, Effect of pulsed laser ablation and continuous laser heating on the adhesion and cohesion of cold sprayed Ti-6Al-4V coatings. J Therm Spray Techn. 2012; 21(6):1322–1333.
113.
LiCG, WangY, GuoLX, Laser remelting of plasma-sprayed conventional and nanostructured Al2O3-13 wt.% TiO2 coatings on titanium alloy. J Alloys Compd. 2010; 506(1):356–363.
114.
YangSQ, MengQW, GengL, Ni-Tic coating deposited on Ti-6Al-4V substrate by thermal spraying and laser re-melting of Ni-clad graphite powder. Mater Lett. 2007; 61(11):2356–2358.
115.
HussainT, McCartneyDG, ShipwayPH, Corrosion behavior of cold sprayed titanium coatings and free standing deposits. J Therm Spray Techn. 2011; 20(1–2):260–274.
116.
ZhouX, MohantyP.Corrosion behaviour of cold sprayed titanium coatings in simulated body fluid. Corros Eng Sci Techn. 2012; 47(2):145–154.
117.
MarroccoT, HussainT, McCartneyDG, Corrosion performance of laser post treated cold sprayed titanium coatings. J Therm Spray Techn. 2011; 20(4):909–917.
118.
FeliceR, AntonelloA, PierpaoloC.Thermo-mechanical finite element modeling of the laser treatment of titanium cold-sprayed coatings. Coatings. 2018; 8(6):219–236.
119.
CarloneP, AstaritaA, RubinoF, Selective laser treatment on cold-sprayed titanium coatings: numerical modeling and experimental analysis. Metall Mater Trans B. 2016; 47(6):3310–3317.
120.
AstaritaA, GennaS, LeoneC, Study of the laser marking process of cold sprayed titanium coatings on aluminium substrates. Opt Laser Technol. 2016; 83:168–176.
121.
LiCJ, LiWY.Deposition characteristics of titanium coating in cold spraying. Surf Coat Tech. 2003; 167(2-3):278–283.
122.
MoridiASM, Hassani-GangarajS, VezzuL, Fatigue behavior of cold spray coatings: the effect of conventional and severe shot peening as pre-/post-treatment. Surf Coat Techol. 2015; 283:247–254.
123.
LuoXT, WeiYK, WangY, Microstructure and mechanical property of Ti and Ti6Al4V prepared by an in-situ shot peening assisted cold spraying. Mater Design. 2015; 85:527–533.
124.
ZhouHX, LiCX, JiG, Local microstructure inhomogeneity and gas temperature effect in, in-situ, shot-peening assisted cold-sprayed Ti-6Al-4V coating. J Alloy Compd. 2018; 766:694–704.
125.
TaoLX, YaoML, MaNS, Deposition behavior, microstructure and mechanical properties of an in-situ micro-forging assisted cold spray enabled additively manufactured Inconel 718 alloy. Mater Design. 2018; 155:384–395.
126.
MaZY, FengAH, ChenDL, Recent advances in friction stir welding/processing of aluminum alloys: microstructural evolution and mechanical properties. Crit Rev Solid State. 2017; 43(1):1–65.
127.
PatelV, LiWY, VairisA, Recent development in friction stir processing as a solid-state grain refinement technique: microstructural and mechanical properties enhancement. Crit Rev Solid State. 2018. (in press)
128.
HuangCJ, YanXC, LiWY, Post-spray modification of cold-sprayed Ni-Ti coatings by high-temperature vacuum annealing and friction stir processing. Appl Surf Sci. 2018; 451:56–66.
129.
HuangCJ, LiWY, FengY, Microstructural evolution and mechanical properties enhancement of a cold-sprayed Cu-Zn alloy coating with friction stir processing. Mater Charact. 2017; 125:76–82.
130.
KhodabakhshiF, MarzbanradB, ShahLH, Friction-stir processing of a cold sprayed AA7075 coating layer on the AZ31B substrate: structural homogeneity, microstructures and hardness. Surf Coat Tech. 2017; 331:116–128.
131.
PeatT, GallowayA, ToumpisA, Enhanced erosion performance of cold spray co-deposited AISI316 MMCs modified by friction stir processing. Mater Design. 2017; 120:22–35.
132.
PeatT, GallowayA, ToumpisA, The erosion performance of cold spray deposited metal matrix composite coatings with subsequent friction stir processing. Appl Surf Sci. 2017; 396:635–648.
133.
HodderKJ, IzadiH, McdonaldAG, Fabrication of aluminum-alumina metal matrix composites via cold gas dynamic spraying at low pressure followed by friction stir processing. Mat Sci Eng A. 2012; 556:114–121.
134.
YangK, LiWY, NiuPL, Cold sprayed AA2024/Al2O3 metal matrix composites improved by friction stir processing: microstructure characterization, mechanical performance and strengthening mechanisms. J Alloy Compd. 2018; 736:115–123.
135.
LopatinNV.Effect of hot rolling by screw mill on microstructure of a Ti-6Al-4V titanium alloy. Int J Mater Form. 2013; 6(4):459–465.
136.
LuoYM, LiuJX, ChengXW, Adiabatic shear banding of hot-rolling Ti-6Al-4V alloy subjected to dynamic shearing and uniaxial dynamic compression. Rare Met. 2015; 34(9):632–637.
137.
LiZ, YangX, ZhangJ, Interfacial mechanical behavior and electrochemical corrosion characteristics of cold-sprayed and hot-rolled titanium/stainless/steel couples. Adv Eng Mater. 2016; 18(7):1240–1249.
138.
TariqNH, GyansahL, QiuX, Thermo-mechanical post-treatment: A strategic approach to improve microstructure and mechanical properties of cold spray additively manufactured composites. Mater Design. 2018; 156:287–299.
139.
GajdaD, MorawskiA, ZaleskiA, Enhancement of pinning centers density and structure by using hot isostatic pressure of 1.2 GPa in Ba(Fe0.92,Co0.08)2As2 superconducting material. J Alloy Compd. 2017; 726:1220–1225.
140.
GajdaD, MorawskiA, ZaleskiA, The influence of HIP on the homogeneity, Jc, Birr, Tc and Fp in MgB2 wires. Supercond Sci Tech. 2014; 28(1):1–7.
141.
GajdaD, MorawskiA, ZaleskiAJ, Formation of high-field pinning centers in superconducting MgB2 wires by using high hot isostatic pressure process. J Supercond Nov Magn. 2017; 30(12):3397–3402.
142.
ShengLY, NanL, ZhangW, Microstructure and mechanical properties determined in compressive tests of quasi-rapidly solidified NiAl-Cr(Mo)-Hf eutectic alloy after hot isostatic pressure and high temperature treatments. J Mater Eng Perform. 2010; 19(5):732–736.
143.
BloseRE.Spray forming titanium alloys using the cold spray process. In: Int Therm Spray Conf. Basel: ASM International; 2005. p. 2–4.
144.
LiN, LiWY, YangXW, An investigation into the mechanism for enhanced mechanical properties in friction stir welded AA2024-T3 joints coated with cold spraying. Appl Surf Sci. 2018; 439:623–631.
145.
LiWY, LiN, YangXW, Impact of cold spraying on microstructure and mechanical properties of optimized friction stir welded AA2024-T3 joint. Mat Sci Eng A. 2017; 702:73–80.
146.
BaharehM, HamidJ, EhsanT.On the evolution of substrate's residual stress during cold spray process: A parametric study. Mater Design. 2018; 138:90–102.
147.
ZhaoCY, ZhangH, ShaoTG, Microstructure and corrosion behavior of Al coating deposited by cold spraying onto FSW AA2219-T87 joint. Corros Eng Sci Techn. 2018; 54(1):1–7.
148.
ZhangH, ZhaoCY, CuiB, The corrosion behavior of cold spray coating on 2219 aluminium alloy joints prepared by friction stir welding. J Phys Conf Ser. 2018; 1063:1–6.
149.
GhelichiR, MacdonaldD, BagherifardS, Microstructure and fatigue behavior of cold spray coated Al5052. Acta Mater. 2012; 60(19):6555–6561.
150.
PriceTS, ShipwayPH, MccartneyDG.Effect of cold spray deposition of a titanium coating on fatigue behavior of a titanium alloy. J Therm Spray Techn. 2006; 15(4):507–512.
151.
CizekJ, KovarikO, SieglJ, Influence of plasma and cold spray deposited Ti layers on high-cycle fatigue properties of Ti6Al4V substrates. Surf Coat Tech. 2013; 217:23–33.
152.
JafarlouDM, CaitlinW, ChampagneVK, Influence of cold sprayed Cr3C2-Ni coating on fracture characteristics of additively manufactured 15Cr-5Ni stainless steel. Mater Design. 2018; 155:134–147.
