The influence of base material properties on the interfacial phenomena in copper and aluminium–copper explosive welds was studied. Two explosive mixtures with different detonation velocities were tested. Sound aluminium–copper joints with effective bonding were achieved by using an explosive mixture with a lower detonation velocity. High energy explosives led to extensive interfacial melting, preventing the production of consistent dissimilar welds. Unlike to the similar copper joints, the aluminium–copper welds presented very asymmetrical interfacial waves, rich in intermetallic phases and displaying a curled morphology. The interaction of the materials in dissimilar welding was found to be completely different depending on the positioning of each alloy in the joint, i.e. positioned as the flyer or as the baseplate.
GalvãoI, LoureiroA, RodriguesDM.Critical review on friction stir welding of aluminium to copper. Sci Technol Weld Joi. 2016; 21(7):523–546. doi: 10.1080/13621718.2015.1118813
2.
LoureiroA, MendesR, RibeiroJB, Effect of explosive mixture on quality of explosive welds of copper to aluminium. Mater Des. 2016; 95:256–267. doi: 10.1016/j.matdes.2016.01.116
3.
FindikF.Recent developments in explosive welding. Mater Des. 2011; 32:1081–1093. doi: 10.1016/j.matdes.2010.10.017
4.
MousaviAAA, Al-HassaniSTS.Numerical and experimental studies of the mechanism of the wavy interface formations in explosive/impact welding. J Mech Phys Solids. 2005; 53:2501–2528. doi: 10.1016/j.jmps.2005.06.001
5.
MendesR, RibeiroJB, LoureiroA.Effect of explosive characteristics on the explosive welding of stainless steel to carbon steel in cylindrical configuration. Mater Des. 2013; 51:182–192. doi: 10.1016/j.matdes.2013.03.069
6.
El-SobkyH.Mechanics of explosive welding. In: BlazynskiTZ, editor. Explosive welding, forming and compaction. Essex: Applied Science Publishers Ltd; 1983. p. 189–217.
7.
GulencB.Investigation of interface properties and weldability of aluminum and copper plates by explosive welding method. Mater Des. 2008; 29:275–278. doi: 10.1016/j.matdes.2006.11.001
8.
PaulH, Litynska-DobrzynskaL, PrazmowskiM.Microstructure and phase constitution near the interface of explosively welded aluminum/copper plates. Metall Mater Trans A. 2013; 44(8):3836–3851. doi: 10.1007/s11661-013-1703-1
9.
AsemabadiM, SedighiM, HonarpishehM.Investigation of cold rolling influence on the mechanical properties of explosive-welded Al/Cu bimetal. Mat Sci Eng A. 2012; 558:144–149. doi: 10.1016/j.msea.2012.07.102
10.
CarvalhoGHSFL, MendesR, LealRM, Effect of the flyer material on the interface phenomena in aluminium and copper explosive welds. Mater Des. 2017; 122:172–183. doi: 10.1016/j.matdes.2017.02.087
11.
Hoseini AtharMM, TolaminejadB.Weldability window and the effect of interface morphology on the properties of Al/Cu/Al laminated composites fabricated by explosive welding. Mater Des. 2015; 86:516–525. doi: 10.1016/j.matdes.2015.07.114
12.
AmaniH, SoltaniehM.Intermetallic phase formation in explosively welded Al/Cu bimetals. Metall Mater Trans B. 2016; 47:2524–2534. doi: 10.1007/s11663-016-0682-1
13.
CowanGR, BergmannOR, HoltzmanAH.Mechanism of bond zone wave formation in explosion-clad metals. Metall Trans A. 1971; 2:3145–3155. doi: 10.1007/BF02814967
14.
DeribasAA, ZakharenkoID.Surface effects with oblique collisions between metallic plates. Combust Explos Shock Waves. 1974; 10:358–367. doi: 10.1007/BF01463767
15.
CarpenterSH, WittmanRH.Explosion welding. Annu Rev Mater Sci. 1975; 5:177–199. doi: 10.1146/annurev.ms.05.080175.001141
16.
WalshJM, ShrefflerRG, WilligFJ.Limiting conditions for jet formation in high velocity collisions. J Appl Phys. 1953; 24:349–359. doi: 10.1063/1.1721278
17.
de RossetWS.Analysis of explosive bonding parameters. Mater Manuf Processes. 2006; 21(6):634–638. doi: 10.1080/10426910600611136
18.
KennedyJE.Gurney energy of explosives: estimation of the velocity and impulse imparted to driven metal. New Mexico: Sandia National Laboratories; 1970.
19.
BorchersC, LenzM, DeutgesM, Microstructure and mechanical properties of medium-carbon steel bonded on low-carbon steel by explosive welding. Mater Des. 2016; 89:369–376. doi: 10.1016/j.matdes.2015.09.164
20.
BataevIA, BataevAA, MaliVI, Structural changes of surface layers of steel plates in the process of explosive welding. Met Sci Heat Treat. 2014; 55:509–513. doi: 10.1007/s11041-014-9663-7
21.
OuyangJ, YarrapareddyE, KovacevicR.Microstructural evolution in the friction stir welded 6061 aluminum alloy (T6-temper condition) to copper. J Mater Process Technol. 2006; 172(1):110–122. doi: 10.1016/j.jmatprotec.2005.09.013
22.
RaoelisonRN, SapanathanT, BuironN, Magnetic pulse welding of Al/Al and Al/Cu metal pairs: consequences of the dissimilar combination on the interfacial behavior during the welding process. J Manuf Process. 2015; 20:112–127. doi: 10.1016/j.jmapro.2015.09.003
23.
HokamotoK, IzumaT, FujitaM.New explosive welding technique to weld aluminum alloy and stainless steel plates using a stainless steel intermediate plate. Metall Mater Trans A. 1993; 24:2289–2297. doi: 10.1007/BF02648602
24.
Satyanarayan,Tanaka S, MoriA, Welding of Sn and Cu plates using controlled underwater shock wave. J Mater Process Technol. 2017; 245:300–308. doi: 10.1016/j.jmatprotec.2017.02.030
25.
SzecketA, InalOT, ViguerasDJ, A wavy versus straight interface in the explosive welding of aluminum to steel. J Vac Sci Technol A. 1985; 3:2588–2593. doi: 10.1116/1.572839
