The effect of post weld heat treatment (PWHT) temperature on laser beam welds in high-entropy alloys (HEAs) using a cold-rolled cantor system (CoCrFeMnNi) was investigated. Laser welding of low heat input was applied to reduce thermal distortion. The cold-rolled HEA welds indicated larger grain size and inferior tensile/hardness properties as compared to the base metal (BM). By applying PWHT, the welds showed superior hardness to the BM with no variation in the face-centred cubic phase and a decrease in the size and fraction of CrMn oxide inclusions. As the PWHT temperature increased (800–1000°C), the variation in the grain size decreased between the weld metal and heat-affected zone, thus resulting in approximately the same tensile strength and elongation of the transverse welds as compared to the BM.
KimJH, ChoiSW, ParkDH, Charpy impact properties of stainless steel weldment in liquefied natural gas pipelines: effect of low temperatures. Mater Des. 2015; 65:914–922. doi: 10.1016/j.matdes.2014.09.085
2.
JangJI, JuJB, LeeBW, Effects of microstructural change on fracture characteristics in coarse-grained heat-affected zones of QLT-processed 9% Ni steel. Mater Sci Eng A. 2003; 340(1–2):68–79. doi: 10.1016/S0921-5093(02)00190-9
3.
Shah HosseiniH, ShamanianM, KermanpurA.Characterization of microstructures and mechanical properties of Inconel 617/310 stainless steel dissimilar welds. Mater Charact. 2011; 62(4):425–431. doi: 10.1016/j.matchar.2011.02.003
4.
OttoF, DlouhýA, SomsenC, The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy. Acta Mater. 2013; 61(15):5743–5755. doi: 10.1016/j.actamat.2013.06.018
5.
StepanovN, TikhonovskyM, YurchenkoN, Effect of cryo-deformation on structure and properties of CoCrFeNiMn high-entropy alloy. Intermetallics. 2015; 59:8–17. doi: 10.1016/j.intermet.2014.12.004
6.
YehJW, ChenSK, LinSJ, Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv Eng Mater. 2004; 6(5):299–303. doi: 10.1002/adem.200300567
7.
HuangPK, YehJW, ShunT-T, Multi-principal element alloys with improved oxidation and wear resistance for thermal spray coating. Adv Eng Mater. 2004; 6(1–2):74–78. doi: 10.1002/adem.200300507
8.
ZhangY, ZhouYJ, LinJP, Solid-solution phase formation rules for multi-component alloys. Adv Eng Mater. 2008; 10(6):534–538. doi: 10.1002/adem.200700240
9.
OttoF, YangY, BeiH, Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys. Acta Mater. 2013; 61(7):2628–2638. doi: 10.1016/j.actamat.2013.01.042
10.
HsuCY, YehJW, ChenSK, Wear resistance and high-temperature compression strength of FCC CuCoNiCrAl0.5Fe alloy with boron addition. Metall and Mater Tran A. 2004; 35(5):1465–1469. doi: 10.1007/s11661-004-0254-x
11.
WuJM, LinSJ, YehJW, Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content. Wear. 2006; 261(5–6):513–519. doi: 10.1016/j.wear.2005.12.008
12.
TsaiMH, LaiCH, YehJW, Effects of nitrogen flow ratio on the structure and properties of reactively sputtered (AlMoNbSiTaTiVZr)Nx coatings. J Phys D. 2008; 41(23):235402 (7 pp). doi: 10.1088/0022-3727/41/23/235402
13.
HuangPK, YehJW.Effects of substrate temperature and post-annealing on microstructure and properties of (AlCrNbSiTiV)N coatings. Thin Solid Films. 2009; 518(1):180–184. doi: 10.1016/j.tsf.2009.06.020
14.
TangWY, ChuangMH, ChenHY, Microstructure and mechanical performance of brand-new Al0.3CrFe1.5MnNi0.5 high-entropy alloys. Adv Eng Mater. 2009; 11(10):788–794. doi: 10.1002/adem.200900135
15.
WuZ, DavidSA, FengZ, Weldability of a high entropy CrMnFeCoNi alloy. Scr Mater. 2016; 124:81–85. doi: 10.1016/j.scriptamat.2016.06.046
16.
KumarN, KomarasamyM, NelaturuP, Friction stir processing of a high entropy alloy Al0.1CoCrFeNi. Jom. 2015; 67(5):1007–1013. doi: 10.1007/s11837-015-1385-9
17.
ZhuZG, SunYF, GohMH, Friction stir welding of a CoCrFeNiAl0.3 high entropy alloy. Mater Lett. 2017; 205:142–144. doi: 10.1016/j.matlet.2017.06.073
18.
AloraierA, IbrahimR, ThomsonP.FCAW process to avoid the use of post weld heat treatment. Int J Pres Ves Pip. 2006; 83(5):394–398. doi: 10.1016/j.ijpvp.2006.02.028
19.
AhmadR, BakarMA.Effect of a post-weld heat treatment on the mechanical and microstructure properties of AA6061 joints welded by the gas metal arc welding cold metal transfer method. Mater Des. 2011; 32(10):5120–5126. doi: 10.1016/j.matdes.2011.06.007
20.
JangMJ, PraveenS, SungHJ, High-temperature tensile deformation behavior of hot rolled CrMnFeCoNi high-entropy alloy. J Alloys Compd. 2018; 730(5):242–248. doi: 10.1016/j.jallcom.2017.09.293
21.
ASTM E8/E8M-08, Standard Test Methods for Tension Testing of Metallic Materials, ASTM international.
22.
ChouHP, ChangYS, ChenSK, Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0 ≤ x ≤ 2) high-entropy alloys. Mater Sci Eng B Solid State Mater Adv Technol. 2009; 163(3):184–189. doi: 10.1016/j.mseb.2009.05.024
23.
ZhangH, PanY, HeYZ.Synthesis and characterization of FeCoNiCrCu high-entropy alloy coating by laser cladding. Mater Des. 2011; 32(4):1910–1915. doi: 10.1016/j.matdes.2010.12.001
24.
JablonskiPD, LicavoliJJ, GaoMC, Manufacturing of high entropy alloys. JOM. 2015; 67(10):2278–2287. doi: 10.1007/s11837-015-1540-3
25.
LicavoliJJ, GaoMC, SearsJS, Microstructure and mechanical behavior of high-entropy alloys. J Mater Eng Perform. 2015; 24(10):3685–3698. doi: 10.1007/s11665-015-1679-7
26.
LiuF, HwangYH, NamSW.The effect of post weld heat treatment on the creep-fatigue behavior of gas tungsten arc welded 308L stainless steel. Mater Sci Eng A. 2006; 427(1–2):35–41. doi: 10.1016/j.msea.2006.03.105
27.
StepanovND, ShaysultanovDG, YurchenkoNY, High temperature deformation behavior and dynamic recrystallization in CoCrFeNiMn high entropy alloy. Mater Sci Eng A. 2015; 636:188–195. doi: 10.1016/j.msea.2015.03.097
28.
OttoF, HanoldNL, GeorgeEP.Microstructural evolution after thermomechanical processing in an equia-tomic, single-phase CoCrFeMnNi high-entropy alloy with special focus on twin boundaries. Intermetallics. 2014; 54:39–48. doi: 10.1016/j.intermet.2014.05.014
29.
LiuWH, WuY, HeJY, Grain growth and the Hall-Petch relationship in a high-entropy FeCrNiCoMn alloy. Scr Mater. 2013; 68(7):526–529. doi: 10.1016/j.scriptamat.2012.12.002
30.
WuX, JiangP, ChenL, Extraordinary strain hardening by gradient structure. Proc Natl Acad Sci USA. 2014; 111(20):7197–7201. doi: 10.1073/pnas.1324069111
31.
SchuhB, Mendez-MartinF, VölkerB, Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation. Acta Mater. 2015; 96:258–268. doi: 10.1016/j.actamat.2015.06.025
