Hybrid weld-adhesive bonding (AB) was used as an approach to improve the mechanical properties of martensitic stainless steel resistance spot welds. The weld fusion zone in both techniques was composed of predominantly martensite and δ-ferrite. It was found that the presence of adhesive does not induce excess hardening effect in the fusion zone. It was shown that hybrid AB/resistance spot welding) i.e. weld-bonding) technique can double the peak load and energy absorption of the joints compared to those of the resistance spot welds. To obtain high performance weld-bonded joints, heat generation during welding should be controlled to produce weld bonds with large fusion zone size, but without detrimental effect on the adhesive strength.
MesslerRW.Joining of materials and structures, from pragmatic process to enabling technology. 1st ed. Boston: Butterworth-Heinemann; 2004.
2.
BartczakB, MuchJ, TrzepiecińskiT.Stress distribution in adhesively-bonded joints and the loading capacity of hybrid joints of car body steels for the automotive industry. Int J Adhes Adhes. 2013; 45:42–52. doi: 10.1016/j.ijadhadh.2013.03.012
3.
LimYC, SquiresL, PanTY, Corrosion behaviour of friction-bit-joined and weld-bonded AA7075-T6/galvannealed DP980. Sci Technol Weld Join. 2017; 22:455–464. doi: 10.1080/13621718.2016.1255404
4.
YadollahiM, BarkhordariS, GholamaliI, Effect of nanofillers on adhesion strength of steel joints bonded with acrylic adhesives, laser weld bonding of A6061Al alloy to AZ31B Mg alloy. Sci Technol Weld Join. 2015; 20:443–450. doi: 10.1179/1362171815Y.0000000037
5.
ZhuXB, YangX, LiYB, Reinforcing cross-tension strength of adhesively bonded joints using metallic solder balls. Int J Adhes Adhes. 2016; 68:263–272. doi: 10.1016/j.ijadhadh.2016.04.009
ZhaoH, DuanX, MaM, Dynamic characteristics of adhesive bonded high strength steel joints. Sci Technol Weld Join. 2010; 15:486–490. doi: 10.1179/136217110X12714217309731
9.
ZhaoH, MaX, CaiZ, Effect of low temperature exposure on impact characteristics of epoxy bonded high strength steels. Sci Technol Weld Join. 2011; 16:405–411. doi: 10.1179/1362171810Y.0000000011
10.
ChangBH, ShiYW, DongSJ.Study on the role of adhesives in weldbonded joints. Weld J. 1999; 78:275s–279s.
11.
SmithS, VrenkenJ, van der VeldtT.Structural performance of adhesive and weld-bonded joints in AHSS. Weld World. 2013; 57:147–156. doi: 10.1007/s40194-012-0006-2
12.
DarwishSMH, GhanyaA.Critical assessment of weld-bonded technologies. J Mater Process Technol. 2000; 105:221–229. doi: 10.1016/S0924-0136(00)00592-6
13.
BelnoueJP-H, GiannisSS, DawsonM, Cohesive/adhesive failure interaction in ductile adhesive joints part II: quasi-static and fatigue analysis of double lap-joint specimens subjected to through-thickness compressive loading. Int J Adhes Adhes. 2016; 68:369–378. doi: 10.1016/j.ijadhadh.2016.03.010
14.
XiaY, ZhouQ, WangPC, Development of high-efficiency modeling technique for weld-bonded steel joints in vehicle structures – part I: static experiments and simulations. Int J Adhes Adhes. 2009; 29:414–426. doi: 10.1016/j.ijadhadh.2008.09.006
15.
FujiiT, TohgoK, SuzukiY, Fatigue strength and fatigue fracture mechanism of three-sheet spot weld-bonded joints under tensile–shear loading. Int J Fat. 2016; 87:424–434. doi: 10.1016/j.ijfatigue.2016.02.023
16.
WeberG, ThommesH, GaulH, Mechanical properties of weldbonded joints of advanced high strength steels. J Adhes Sci Technol. 2011; 25:2369–2407. doi: 10.1163/016942411X580090
17.
ShenJ, ZhangYS, LaiXM, Adhesive placement in weld-bonding multiple stacks of steel sheets. Weld J. 2012; 91:59s–66s.
18.
ZhangYS, ShenJ, ZhaoYY, Effect of adhesive characteristics on the weld quality in weld bonding multiple steel sheets. Weld J. 2013; 92:363s–374s.
19.
SamS, ShomeM.Static and fatigue performance of weld bonded dual phase steel sheets. Sci Technol Weld Join. 2010; 15:242–247. doi: 10.1179/136217110X12665778348461
20.
LongX, KhannaSK.Fatigue performance of spot welded and weld bonded advanced high strength steel sheets. Sci Technol Weld Join. 2008; 13:241–247. doi: 10.1179/174329307X249379
21.
GonçalvesVM, MartinsPAF.Static and fatigue performance of weld-bonded stainless steel joints. Mater Manuf Processes. 2006; 21:774–778. doi: 10.1080/03602550600728331
22.
SantosIO, ZhangW, GoncalvesVM, Weld bonding of stainless steel. Int J Mach Tools Manuf. 2004; 44:1431–1439. doi: 10.1016/j.ijmachtools.2004.06.010
23.
KhanMF, SharmaG, DwivediDK.Weld-bonding of 6061 aluminium alloy. Int J Adv Manuf Technol. 2015; 78:863–873. doi: 10.1007/s00170-014-6670-1
24.
PereiraAM, FerreiraJAM, AntunesFV, Assessment of the fatigue life of aluminium spot-welded and weld-bonded joints. J Adhes Sci Technol. 2014; 28:1432–1450. doi: 10.1080/01694243.2012.698107
25.
PouranvariM, MarashiSPH.Failure mode transition in AISI 304 resistance spot welds. Weld J. 2012; 91:303s–309s.
PouranvariM.Fracture toughness of martensitic stainless steel resistance spot welds. Mater Sci Eng A. 2017; 680:97–107. doi: 10.1016/j.msea.2016.10.088
31.
XuW, LiuL, ZhouY, Tensile and fatigue properties of weld-bonded and adhesive-bonded magnesium alloy joints. Mater Sci Eng A. 2013; 563:125–132. doi: 10.1016/j.msea.2012.11.049
32.
XuW, ChenDL, LiuL, Microstructure and mechanical properties of weld-bonded and resistance spot welded magnesium-to-steel dissimilar joints. Mater Sci Eng A. 2012; 537:11–24. doi: 10.1016/j.msea.2011.12.096
LiuL, JiangJ.Formation and disappearance of pores in plasma arc weld bonding process of magnesium alloy. Mater Trans. 2009; 50:1649–1654. doi: 10.2320/matertrans.MF200919
35.
LiuL, WangH.Microstructure and properties analysis of laser welding and laser weld bonding Mg to Al joints. Metall Mater Trans A. 2011; 42:1044–1050. doi: 10.1007/s11661-010-0521-y
36.
MesslerRWJr, BellJ, CraidueO.Laser beam weld bonding of AA5754 for automobile structures. Weld J. 2003; 82:151s–153s.
37.
BeylerCL, HirschlerMM.Thermal decomposition of polymers. SFPE Handbook of Fire Protection Engineering, 2002, Section 1, Chapter 7, 111–131.
38.
BhadeshiaHKDH, HoneycombeR.Steels: microstructure and properties. 3rd ed. Oxford: Butterworth-Heinemann; 2006.
39.
SawhillJMJr, BakerJC.Spot weldability of high-strength sheet steels. Weld J. 1980; 59:19s–30s.
