An experimental method based on digital image correlation technology is proposed to measure welding buckling distortion for bead-on-plane with tungsten inert gas welding. This study focuses on the effect of welding heat input for dynamic buckling and full-field distribution. The experimental results demonstrate that heat input has a great influence on welding buckling distortion. The longitudinal shrinkage of the weld bead is in direct proportion to the heat input. In the weld bead, the longitudinal plastic strain is small, while the transverse strain is large. The key points on the line, that is perpendicular to the bisector of the weld bead, experience a distorted trend of positive increase, constant displacement, negative increase and stable displacement, although the heat inputs are different.
GaneshKC, VasudevanM, BalasubramanianKR, . Thermo-mechanical analysis of TIG welding of AISI 316LN stainless steel. Mater Manuf Process.2014; 29(8):903–909. doi: 10.1080/10426914.2013.872266
2.
ChenZ, ChenZC, ShenoiRA.Influence of welding sequence on welding deformation and residual stress of a stiffened plane structure. Ocean Eng.2015; 106:271–280. doi: 10.1016/j.oceaneng.2015.07.013
3.
GannonL, LiuY, PeggN.Effect of welding sequence on residual stress and distortion in flat-bar stiffened planes. Mar Struct.2010; 23(3):385–404. doi: 10.1016/j.marstruc.2010.05.002
4.
CamilleriD, ComlekciT, GrayTF.Computational prediction of out-of-plane welding distortion and experimental investigation. J Strain Anal Eng.2005; 40(2):161–176. doi: 10.1243/030932405X7809
5.
DengD, MurakawaH.Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements. Comput Mater Sci.2006; 37(3):269–277. doi: 10.1016/j.commatsci.2005.07.007
6.
MurakawaH, DengD, MaN, Applications of inherent strain and interface element to simulation of welding deformation in thin-plane structures. Comput Mater Sci.2011; 51:43–52. doi: 10.1016/j.commatsci.2011.06.040
7.
DengD, MurakawaH, ShibaharaM.Investigations on welding distortion in an asymmetrical curved block by means of numerical simulation technology and experimental method. Comput Mater Sci.2010; 48:187–194. doi: 10.1016/j.commatsci.2009.12.027
8.
DengD, MurakawaH, MaN.Predicting welding deformation in thin plate panel structure by means of inherent strain and interface element. Sci Technol Weld Joi.2012; 17:13–21. doi: 10.1179/1362171811Y.0000000065
9.
MaN, HuangH, YinX, Welding distortion and inherent deformation under temporary tacking and its released states. Sci Technol Weld Joi.2016; 21:389–396. doi: 10.1080/13621718.2015.1123443
10.
WangJC, YinXQ, MurakawaH.Experimental and computational analysis of residual buckling distorted of bead-on-plane welded joint. J Mater Process Technol.2013; 213:1447–1458. doi: 10.1016/j.jmatprotec.2013.02.009
11.
WangJC, MaN, MurakawaH.An efficient FE computation for predicting welding induced buckling in production of ship panel structure. Mar Struct.2015; 41:20–52. doi: 10.1016/j.marstruc.2014.12.007
12.
DengD, ZhouYJ, BiT.Experimental and numerical investigations of welding distortion induced by CO2 gas arc welding in thin-plane bead-on joints. Mater Des.2013; 52:720–729. doi: 10.1016/j.matdes.2013.06.013
13.
VasantharajaP, MaduarimuthuV, VasudevanM, Assessment of residual stresses and distortion in stainless steel weld joints. Mater Manuf Process.2012; 27(12):1376–1381. doi: 10.1080/10426914.2012.663135
14.
JavadiY, HasaniM, SadeghiS.Investigation of clamping effect on the welding sub-surface residual stress and deformation by using the ultrasonic stress measurement and finite element method. J Nondestructive Eval.2015; 34:3. doi: 10.1007/s10921-015-0277-9
15.
MertT, TsaiCL, BabuSS, . Strain-based assessment and modeling for low-distortion welding procedure. Mater Manuf Process.2012; 27(9):943–948. doi: 10.1080/10426914.2011.602794
16.
SunJ, LiuX, TongY, A comparative study on welding temperature fields, residual stress distributions and deformations induced by laser beam welding and CO2 gas arc welding. Mater Des.2014; 63:519–530. doi: 10.1016/j.matdes.2014.06.057
17.
GuoYQ, WuDJ, MaGY.Numerical simulation and experimental investigation of residual stresses and distortions in pulsed laser welding of hastelloy C-276 thin sheets. Rare Met Mater Eng.2014; 43:11. doi: 10.1016/S1875-5372(14)60090-4
18.
DaviesCM, AhnJ, TsunoriM, The influence of pre-existing deformation on GMA welding distortion in thin steel planes. J Mater Process Technol.2015; 24:261–273.
19.
DengD.FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects. Mater Des.2009; 30:359–366. doi: 10.1016/j.matdes.2008.04.052
20.
HuH, LiangJ, TangZ.Digital speckle based strain measurement system for forming limit diagram prediction. Opt Laser Eng.2014; 55:12–21. doi: 10.1016/j.optlaseng.2013.10.017
