Thin ultra-high strength steel shaped as 700 mm long U-beams have been laser welded in overlap configuration to study the influence of welding sequence on distortions. Three different welding directions, three different energy inputs as well as stitch welding have been evaluated, using resistance spot welding (RSW) as a reference. Transverse widening at the ends and narrowing at the centre of the beam were measured. A clear correlation was found between the weld metal volume and distortion. For continuous welds there was also a nearly linear relationship between the energy input and distortion. However, the amount of distortion was not affected by a change in welding direction. Stitching and RSW reduced distortion significantly compared to continuous laser welding.
FahlströmK. and LarssonJ.: ‘Laser welding of 1900MPa boron steel’, in NOLAMP-conference August 2013: Gothenburg, Sweden.
2.
FahlströmK.: ‘Laser welding of boron steels for light-weight vehicle applications’, in Production technology, Licentiate thesis, Nr 1 2015, University West: Trollhättan, Sweden.
3.
LongH., GeryD., CarlierA. and MaropoulosP. G.: ‘Prediction of welding distortion in butt joint of thin plates’, Mater. Des., 2009, 30, 4126–4135. doi: 10.1016/j.matdes.2009.05.004
4.
RadajD.: ‘Heat effects of welding: temperature field, residual stress, distortion’, 1992, Berlin, Springer Science & Business Media.
5.
TengT.-L., ChangP.-H. and TsengW.-C.: ‘Effect of welding sequences on residual stresses’, Comput. Struct., 2003, 81, 273–286. doi: 10.1016/S0045-7949(02)00447-9
6.
KadivarM. H., JafarpurK. and BaradaranG. H.: ‘Optimizing welding sequence with genetic algorithm’, Comput. Mech., 2000, 26, 514–519. doi: 10.1007/s004660000195
7.
Sattari-FarI. and JavadiY.: ‘Influence of welding sequence on welding distortions in pipes’, Int. J. Press. Vessels Pip., 2008, 85, 265–274. doi: 10.1016/j.ijpvp.2007.07.003
8.
LeggattR.: ‘Residual stresses in welded structures’, Int. J. Press. Vessels Pip., 2008, 85, 144–151. doi: 10.1016/j.ijpvp.2007.10.004
9.
TengT. and LinC.: ‘Effect of welding conditions on residual stresses due to butt welds’, Int. J. Press. Vessels Pip., 1998, 75, 857–864. doi: 10.1016/S0308-0161(98)00084-2
10.
GannonL., LiuY., PeggN. and SmithM.: ‘Effect of welding sequence on residual stress and distortion in flat-bar stiffened plates’, Mar. Struct., 2010, 23, 385–404. doi: 10.1016/j.marstruc.2010.05.002
11.
DengD. and MurakawaH.: ‘Prediction of welding distortion and residual stress in a thin plate butt-welded joint’, Comput. Mater. Sci., 2008, 43, 353–365. doi: 10.1016/j.commatsci.2007.12.006
12.
ColegroveP., IkeaguC., ThistlethwaiteA., WilliamsS., NagyT., SuderW., SteuwerA. and PirlingT.: ‘Welding process impact on residual stress and distortion’, Sci. Technol. Weld. Join., 2009, 14, (8), 717–725. doi: 10.1179/136217109X406938
13.
MooreP., HowseD. and WallachE.: ‘Microstructures and properties of laser/arc hybrid welds and autogenous laser welds in pipeline steels’, Sci. Technol. Weld. Join., 2004, 9, (4), 314–322. doi: 10.1179/136217104225021652
14.
De-junY., Xue-songL., JunL., Jian-guoY. and Hong-yuanF.: ‘Effect of strain hardening and strain softening on welding distortion and residual stress of A7N01-T4 aluminum alloy by simulation analysis’, J. Cent. South Univ. Technol., 2010, 17, 666–673. doi: 10.1007/s11771-010-0538-9
15.
SiegeleD., BrandM. and VenezianoC.: ‘Numerical welding simulation of an aluminium automotive component’, Weld. World, 2008, 52, (1), 27–33.
16.
PerretW., ThaterR., AlberU., SchwenkC. and RethmeierM.: ‘Approach to assess a fast welding simulation in an industrial environment – application for an automotive welded part’, Int. J. Automot. Technol., 2011, 12, (6), 895–901. doi: 10.1007/s12239-011-0102-0
17.
PapadakisL., SchoberA. and ZaehM.: ‘Numerical investigation of the influence of preliminary manufacturing processes on the crash behaviour of automotive body assemblies’, Int. J. Adv. Manuf. Technol., 2013, 65, 867–880. doi: 10.1007/s00170-012-4224-y
18.
ThaterR., WiethopP. and RethmeierM.: ‘Welding simulation in car body construction’, Laser Technol. J., 2015, 12, 33–37. doi: 10.1002/latj.201500009
19.
FahlströmK., AnderssonO., TodalU. and MelanderA.: ‘Minimization of distortions during laser welding of ultra high strength steel’, J. Laser Appl., 2015, 27, (S2), S29011-1–S29011-8. doi: 10.2351/1.4906468
