Most previous split anode calorimetry research has applied high weld currents which exhibit pseudo Gaussian distributions of arc current and power density. In this paper we investigate low current arcs and show that both the current and power distributions have minima in the centre – varying significantly from the expected Gaussian profile. This was postulated due to the formation of the arc with the copper anode and the tungsten cathode. Furthermore, a number of parameters were varied including the step size between measurements, anode thickness and anode surface condition as well as cathode type and tip geometry. The step size between measurements significantly influenced the distribution profile and the anode thickness needed to be above 7 mm to obtain consistent results.
FiheyJ. and SimoneauR.: ‘Weld Penetration Variation in GTA Welding of some 304 L Stainless Steels’, Proc. Welding Technology for Energy Applications, Gatlinburg, TN, May 1982, Session D. Gas Shielded Processes, 139–153.
2.
TanakaM., TerasakiH., FujiiH., UshioM., NaritaR. and KobayashiK.: ‘Anode heat transfer in TIG welding and its effect on the cross-sectional area of weld penetration’, Weld. Int., 2006, 20, (4), 268–274. doi: 10.1533/wint.2006.3577
3.
UshioM., TanakaM. and MatsudaF.: Proc. Symp. ‘Physical Aspects of Arc Welding’, Glasgow (UK), September 1993, Delftse Uitgevers Maatschappij, Paper 3, 25–42.
4.
TanakaM. and LowkeJ. J.: ‘Predictions of weld pool profiles using plasma physics’, J. Phys. D: Appl. Phys., 2007, 40, (1), R1–R23. doi: 10.1088/0022-3727/40/1/R01
5.
OlsenH.: ‘Thermal and electrical properties of an argon plasma’, Phys. Fluids, 1959, 2, (6), 614–623. doi: 10.1063/1.1705962
6.
OlsenH.: ‘The electric arc as a light source for quantitative spectroscopy’, J. Quant. Spectrosc. Radiat., 1963, 3, (4), 305–333. doi: 10.1016/0022-4073(63)90015-3
7.
ThorntonM.: ‘Spectroscopic determination of temperature distributions for a TIG Arc’, J. Phys. D: Appl. Phys., 1993, 26, (9), 1432. doi: 10.1088/0022-3727/26/9/014
8.
VervischP., CheronB. and LhuissierJ.: ‘Spectroscopic analysis of a TIG arc plasma’, J. Phys. D: Appl. Phys., 1990, 23, (8), 1058. doi: 10.1088/0022-3727/23/8/009
9.
VilarinhoL. O. and ScottiA.: ‘Proposal for a modified Fowler-Milne method to determine the temperature profile in TIG welding at low currents’, J. Braz. Soc. Mech. Sci. Eng., 2004, 26, (1), 34–39. doi: 10.1590/S1678-58782004000100006
10.
WeglowskiM.: ‘Determination of GTA and GMA welding arc temperatures’, Weld. Int., 2005, 19, (3), 186–192. doi: 10.1533/wint.2005.3398
11.
HaddadG. and FarmerA.: ‘Temperature determinations in a free-burning arc. I. Experimental techniques and results in argon’, J. Phys. D: Appl. Phys., 1984, 17, (6), 1189. doi: 10.1088/0022-3727/17/6/015
12.
FarmerA., HaddadG. and CramL.: ‘Temperature determinations in a free-burning arc. III. Measurements with molten anodes’, J. Phys. D: Appl. Phys., 1986, 19, (9), 1723. doi: 10.1088/0022-3727/19/9/016
13.
DegoutD. and CatherinotA.: ‘Spectroscopic analysis of the plasma created by a double-flux tungsten inert gas (TIG) arc plasma torch’, J. Phys. D: Appl. Phys., 1986, 19, (5), 811. doi: 10.1088/0022-3727/19/5/013
14.
TanakaM. and UshioM.: ‘Plasma state in free-burning argon arc and its effect on anode heat transfer’, J. Phys. D: Appl. Phys., 1999, 32, (10), 1153. doi: 10.1088/0022-3727/32/10/312
15.
TanakaM. and UshioM.: ‘Observations of the anode boundary layer in free-burning argon arcs’, J. Phys. D: Appl. Phys., 1999, 32, (8), 906. doi: 10.1088/0022-3727/32/8/011
16.
TerasakiH., TanakaM. and UshioM.: ‘Effects of metal vapor on electron temperature in helium gas tungsten arcs’, Metall. Mater. Trans. A, 2002, 33, (4), 1183–1188. doi: 10.1007/s11661-002-0219-x
17.
HiraokaK., OkadaA. and InagakiM.: ‘Effect of electrode geometry on maximum arc pressure in gas tungsten arc welding’, Q. J. Jpn. Weld. Soc., 1985, 3, (2), 246–252. doi: 10.2207/qjjws.3.246
18.
OhD. S., KimY. S. and ChoS. M.: ‘Derivation of current density distribution by arc pressure measurement in GTA welding’, Sci. Technol. Weld. Join., 2005, 10, (4), 442–446. doi: 10.1179/174329305X44116
19.
HamH. S., OhD. S. and ChoS. M.: ‘Measurement of arc pressure and shield gas pressure effect on surface of molten pool in TIG welding’, Sci. Technol. Weld. Join., 2012, 17, (7), 594–600. doi: 10.1179/1362171812Y.0000000052
20.
KobayashiK., NishimuraY., IijimaT., UshioM., TanakaM., ShimamuraJ., UenoY. and YamashitaM.: ‘Practical application of high efficiency twin-arc TIG welding method (SEDAR-TIG) for PCLNG storage tank’, Weld. World, 2004, 48, (7–8), 35–39. doi: 10.1007/BF03266441
21.
FanaraC.: ‘A Langmuir multi-probe system for the characterization of atmospheric pressure arc plasmas’, PhD thesis, Cranfield University, Cranfield, UK, 2003.
22.
FanaraC. and RichardsonI. M.: ‘A Langmuir multi-probe system for the characterization of atmospheric pressure arc plasmas’, J. Phys. D: Appl. Phys., 2001, 34, (18), 2715–2725. doi: 10.1088/0022-3727/34/18/302
23.
NestorO. H.: ‘An experimental determination of current density and heat transfer intensity distributions at the anode of high current, inert gas arcs’, PhD thesis, University of Buffalo, Buffalo, NY, 1959.
24.
NestorO. H.: ‘Heat intensity and current density distributions at the anode of high current, inert gas arcs’, J. Appl. Phys. D, 1962, 33, (5), 1638–1648. doi: 10.1063/1.1728803
25.
TsaiM. and KouS.: ‘Heat transfer and fluid flow in welding arcs produced by sharpened and flat electrodes’, Int. J. Heat Mass Transf., 1990, 33, (10), 2089–2098. doi: 10.1016/0017-9310(90)90111-7
26.
TsaiN.: ‘Heat distribution and weld bead geometry in arc welding’, PhD Thesis, Massachusetts Institute of Technology, Massachusetts, USA, 1983.
RichardsonI.: ‘Properties of the constricted gas tungsten (Plasma) welding arc at elevated pressures’, PhD thesis, Cranfield University, Cranfield, UK, 1991.
29.
BiswasK.: ‘A numerical prediction of the temperature distribution in the thermionic cathode of a welding arc’, J. Mater. Process. Technol., 1994, 40, (1), 219–237. doi: 10.1016/0924-0136(94)90488-X
30.
LuM. and KouS.: ‘Power and current distributions in gas tungsten arcs’, Weld. J., 1988, 67, (2), 29s–34s.
31.
LuF., YaoS., LouS. and LiY.: ‘Modeling and finite element analysis on GTAW arc and weld pool’, Comp. Mater. Sci., 2004, 29, (3), 371–378. doi: 10.1016/j.commatsci.2003.10.009
32.
LuF., TangX., YuH. and YaoS.: ‘Numerical simulation on interaction between TIG welding arc and weld pool’, Comp. Mater. Sci., 2006, 35, (4), 458–465. doi: 10.1016/j.commatsci.2005.03.014
33.
RamírezM. A., TrapagaG. and McKelligetJ.: ‘A comparison between different numerical formulations for welding arc representations’, J. Mater. Process. Technol., 2004, 155–156, 1634–1640. doi: 10.1016/j.jmatprotec.2004.04.313
34.
MurphyA. B., TanakaM., YamamotoK., TashiroS., LowkeJ. J. and OstrikovK.: ‘Modelling of arc welding: the importance of including the arc plasma in the computational domain’, Vacuum, 2010, 85, (5), 579–584. doi: 10.1016/j.vacuum.2010.08.015
35.
CramL., PoladianL. and RoumeliotisG.: ‘Departures from equilibrium in a free-burning argon arc’, J. Phys. D: Appl. Phys., 1988, 21, (3), 418. doi: 10.1088/0022-3727/21/3/007
36.
FanH., TsaiH.-L. and NaS.: ‘Heat transfer and fluid flow in a partially or fully penetrated weld pool in gas tungsten arc welding’, Int. J. Heat Mass Transf., 2001, 44, (2), 417–428. doi: 10.1016/S0017-9310(00)00094-6
37.
WuC. and GaoJ.: ‘Analysis of the heat flux distribution at the anode of a TIG welding arc’, Comp. Mater. Sci., 2002, 24, (3), 323–327. doi: 10.1016/S0927-0256(01)00254-3
38.
WuC., UshioM. and TanakaM.: ‘Analysis of the TIG welding arc behavior’, Comp. Mater. Sci., 1997, 7, (3), 308–314. doi: 10.1016/S0927-0256(96)00048-1
39.
BehringerK.: ‘Einführung in die Plasmaspektroskopie’, in Lecture Script, Universität Augsburg, Germany. 2000.
40.
NestorO. and OlsenH.: ‘Numerical methods for reducing line and surface probe data’, SIAM Rev., 1960, 2, (3), 200–207. doi: 10.1137/1002042
41.
SchoeckP. and EckertE.: ‘An investigation of anode heat transfer in high intensity arcs’, Proc. ‘Ionization Phenomena in Gases’, Vol. II, Munich, Germany, 1962, 1812–1829.
42.
TsaiN. and EagarT.: ‘Distribution of the heat and current fluxes in gas tungsten arcs’, Metall. Trans. B, 1985, 16, (4), 841–846. doi: 10.1007/BF02667521
43.
WilkinsonJ. and MilnerD.: ‘Heat transfer from arcs’, Br. Weld. J., 1960, 7, (2), 115–128.
44.
SchoeckP. A.: ‘An investigation of the anode energy balance of high intensity arcs in argon’, in ‘Modern developments in heat transfer’, 353–400; 1963, New York, USA, Academic Press New York.
45.
EberhartR. C. and SebanR.: ‘The energy balance for a high current argon arc’, Int. J. Heat Mass Transf., 1966, 9, (9), 939–949. doi: 10.1016/0017-9310(66)90067-6
46.
StenbackaN.: ‘On arc efficiency in gas tungsten arc welding’, Soldagem Insp., 2013, 18, (4), 380–390. doi: 10.1590/S0104-92242013000400010
47.
HeberleinJ. and PfenderE.: ‘Investigation of the anode boundary layer of an atmospheric pressure argon arc’, IEEE Trans. Plasma Sci., 1977, 5, (3), 171–180. doi: 10.1109/TPS.1977.4317036
48.
RichardsonI.: Delft Technical University, Delft, NL, personal communication, 24 July 2012.
49.
MajetichJ. C. and YeoR. B. G., US Steel Corp.: ‘Method of Welding Stainless Steel’, US Patent 3584187 A, USA, 8 June 1971.
50.
BernáthA., MartonH. and DobránszkyJ.: ‘Characterization of the plasma shape of the TIG welding arc’, Proc. 3rd Int. Conf. on ‘Thermal Process Modelling and Simulation’, Budapest, Hungary, April 2006, International Federation for Heat Treatment and Surface Engineering.
51.
SadekA., UshioM. and MatsudaF.: ‘Gas-tungsten-arc cathode and related phenomena’, Trans. JWRI, 1987, 16, (1), 195–210.
52.
KeyJ.: ‘Anode/cathode geometry and shielding gas interrelationships in GTAW’, Weld. J., 1980, 59, (12), 364-s–370-s.
