AA2198–T851 sheets were welded by bobbin tool friction stir welding using a rotational speed of 800 rpm and welding speed of 42 mm min−1. The microstructure and precipitates within the joint were characterised by transmission electron microscopy. The global and local mechanical behaviour was determined using a digital image correlation system. Specific attention was given to the relationship between the local microstructure and properties across the joint, which govern the global strength and ductility of the welds. A lower global elongation of the joint is caused by the premature strain localisation in the softened zone.
RiojaR. J. and LiuJ.: ‘The evolution of Al–Li base products for aerospace and space applications’, Metall. Mater. Trans. A, 2012, 43, 3325–3337. doi: 10.1007/s11661-012-1155-z
2.
CaiB., ZhengZ. Q., HeD. Q., LiS. C. and LiH. P.: ‘Friction stir weld of 2060 Al–Cu–Li alloy: microstructure and mechanical properties’, J. Alloys Compd., 2015, 649, 19–27. doi: 10.1016/j.jallcom.2015.02.124
3.
CamG. and MistikogluS.: ‘Recent developments in friction stir welding of Al-alloys’, J. Mater. Eng. Perform., 2014, 23, 1936–1953. doi: 10.1007/s11665-014-0968-x
4.
ShenJ., WangF., SuhuddinU. F. H., HuS., LiW. and dos SantosJ. F.: ‘Crystallographic texture in bobbin tool friction-stir-welded aluminum’, Metall. Mater. Trans. A, 2015, 46, 2809–2813. doi: 10.1007/s11661-015-2948-7
5.
SkinnerM. and EdwardsR. L.: ‘Improvements to the FSW process using the self-reacting technology’, Mater. Sci. Forum, 2003, 426–432, 2849–2854. doi:
10.4028/www.scientific.net/MSF.426-432.2849
6.
ThreadgillP. L., AhmedM. M. Z., MartinJ. P., PerrettJ. G. and WynneB. P.: ‘The use of bobbin tools for friction stir welding of aluminium alloys’, Mater. Sci. Forum, 2010, 638–642, 1179–1184. doi:
10.4028/www.scientific.net/MSF.638-642.1179
7.
WanL., HuangY., WangY., LvS. and FengJ.: ‘Friction stir welding of aluminium hollow extrusion: Weld formation and mechanical properties’, Mater. Sci. Technol., 2015, 31, 1433–1442. doi: 10.1179/1743284714Y.0000000721
8.
SchneiderJ. A., NunesA. C. and BrendelM. S.: ‘The influence of friction stir weld tool form and welding parameters on weld structure and properties: nugget bulge in self-reacting friction stir welding’, 8th Int. Symposium on ‘Friction stir welding’, MARITIM Seehotel Timmendorfer Strand, Germany, 2010.
9.
WangF. F., LiW. Y., ShenJ., HuS. Y. and dos SantosJ. F.: ‘Effect of tool rotational speed on the microstructure and mechanical properties of bobbin tool friction stir welding of Al–Li alloy’, Mater. Des., 2015, 86, 933–940.
10.
ZhangZ. H., LiW. Y., FengY., LiJ. L. and ChaoY. J.: ‘Global anisotropic response of friction stir welded 2024 aluminum sheets’, Acta Mater., 2015, 92, 117–125. doi: 10.1016/j.actamat.2015.03.054
11.
GaoC., ZhuZ. X., HanJ. and LiH. J.: ‘Correlation of microstructure and mechanical properties in friction stir welded 2198–T8 Al–Li alloy’, Mater. Sci. Eng. A, 2015, 639, 489–499. doi: 10.1016/j.msea.2015.05.038
12.
ZhangS., ZengW., YangW., ShiC. and WangH.: ‘Ageing response of a Al–Cu–Li 2198 alloy’, Mater. Des., 2014, 63, 368–374. doi: 10.1016/j.matdes.2014.04.063
13.
SteuwerA., DumontM., AltenkirchJ., BiroscaS., DeschampsA., PrangnellP. B. and WithersP. J.: ‘A combined approach to microstructure mapping of an Al–Li AA2199 friction stir weld’, Acta Mater., 2011, 59, 3002–3011. doi: 10.1016/j.actamat.2011.01.040
14.
CavaliereP., CabibboM., PanellaF. and SquillaceA.: ‘2198 Al–Li plates joined by friction stir welding: mechanical and microstructural behavior’, Mater. Des., 2009, 30, 3622–3631. doi: 10.1016/j.matdes.2009.02.021
15.
HersentE., DriverJ. H., PiotD. and DesrayaudC.: ‘Integrated modelling of precipitation during friction stir welding of 2024–T3 aluminium alloy’, Mater. Sci. Technol., 2010, 26, 1345–1352. doi: 10.1179/026708310X12798718274511
16.
SchneiderJ. A., NunersA. C.,Jr, ChenP. S. and SteeleG.: ‘TEM study of the FSW nugget in AA2195–T81’, J. Mater. Sci., 2005, 40, 4341–4345. doi: 10.1007/s10853-005-2808-8
17.
ShuklaK. and BaeslackW. A.: ‘Study of process/structure/property relationships in friction stir welded thin sheet Al–Cu–Li alloy’, Sci. Technol. Weld. Joining, 2009, 14, 376–387. doi: 10.1179/136217109X412409
18.
GaultB., CuiX. Y., MoodyM. P., De GeuserF., SigliC., RingerS. P. and DeschampsA.: ‘Atom probe microscopy investigation of Mg site occupancy within δ′ precipitates in an Al–Mg–Li alloy’, Scr. Mater., 2012, 66, 903–906. doi: 10.1016/j.scriptamat.2012.02.021
19.
JoluT. L., MorgeneyerT. F. and Gourgues-LorenzonA. F.: ‘Effect of joint line remnant on fatigue lifetime of friction stir welded Al–Cu–Li alloy’, Sci. Technol. Weld. Joining, 2010, 15, 694–698. doi: 10.1179/136217110X12813393169453
20.
FullerC. B., MahoneyM. W., CalabreseM. and MiconaL.: ‘Evolution of microstructure and mechanical properties in naturally aged 7050 and 7075 Al friction stir welds’, Mater. Sci. Eng. A, 2010, 527, 2233–2240. doi: 10.1016/j.msea.2009.11.057
21.
LiW., JiangR., ZhangZ. and MaY. E.: ‘Effect of rotation speed to welding speed ratio on microstructure and mechanical behavior of friction stir welded aluminum–lithium alloy joints’, Adv. Eng. Mater., 2013, 15, 1051–1058. doi: 10.1002/adem.201300147
22.
JoluT. L., MorgeneyerT. F., DenquinA., SennourM., LaurentA., BessonJ., FrancoiseA. and LorenzonG.: ‘Microstructural characterization of internal welding defects and their effect on the tensile behavior of FSW joints of AA2198 Al–Cu–Li Alloy’, Metall. Mater. Trans. A, 2014, 45, 5531–5544. doi: 10.1007/s11661-014-2537-1
23.
İpekoğluG., ErimS. and ÇamG.: ‘Effects of temper condition and post weld heat treatment on the microstructure and mechanical properties of friction stir butt welded AA7075 Al-alloy plates’, Int. J. Adv. Manuf. Technol., 2014, 70, 201–213. doi: 10.1007/s00170-013-5255-8
24.
ZhangZ., LiW., WangF. and LiJ.: ‘Sample geometry and size effects on tensile properties of friction stir welded AA2024 joints’, Mater. Lett., 2016, 162, 94–96. doi: 10.1016/j.matlet.2015.09.122
