Among various materials available for alleviating the corrosion-related degradation, thermal sprayed Fe-based metallic glass coatings (MGCs) have received huge attention from the scientific community due to the exceptional combination of mechanical and corrosion properties, along with commercially attractive low material cost of this particular alloy system. Emerging reports on the thermal sprayed Fe-based MGCs outperforming conventional corrosion-resistant materials and coatings have accelerated further exploration of this domain, resulting in an immense increase of research activities over the last few decades producing fascinating results. This review takes a holistic approach encompassing an in-depth assessment of all the relevant salient work till date, including corrosion properties, corresponding degradation mechanisms, metallurgical and environmental factors with reference to passive film dynamics and/or formation of corrosion products. Moreover, various strategies for improved corrosion properties and recent research progress have been reviewed with an attempt to identify the present knowledge gaps and the future research directions.
Get full access to this article
View all access options for this article.
References
1.
AhmadZ.Principles of corrosion engineering and corrosion control. Elsevier; 2006. https://doi.org/10.1016/B978-0-7506-5924-6.X5000-4
2.
Materials N, Board A, Sciences P. Assessment of corrosion education. 2009. https://doi.org/10.17226/12560
3.
BowmanEJacobsonGKochG International measures of prevention, application, and economics of corrosion technologies study. NACE Int. 2016:A-19.
4.
UhligHH.The cost of corrosion to USA. Corrosion. 1950;6:29–33.
5.
BennettL.Economic effects of metallic corrosion in the United States: a report to the congress. United States: Department of Commerce, National Bureau of Standards; 1978.
6.
KochGBrongersMThompsonNCost of corrosion in the United States. In KutzM, editors. Handbook of environmental degradation of materials. Norwich, NY: William Andrew Publishing; 2005; p. 3–24.
7.
KochGBrongersMThompsonNVirmaniY.Corrosion cost and preventive strategies in the United States, Publication no. FHWA-RD-01-156. Houston, United States: NACE International; 2002.
8.
Zairyoto-Kankyo. Survey of corrosion cost in Japan. Corros Eng. 2001;50:490–512.
9.
Boshoku-Gijutsu. Report on corrosion loss in Japan. Corros Eng. 1977;26:401–512.
10.
PotterE. The corrosion scene in Australia, 1972.
11.
CherryBWSkerryBS. Engineering. MUD of M. Corrosion in Australia : the report of the Australian National Centre for Corrosion Prevention and Control feasibility study, June 1983. Dept. of Materials Engineering, Monash University; 1983.
12.
HouBLiXMaXThe cost of corrosion in China. NPJ Mater Degrad. 2017;1. doi:10.1038/s41529-017-0005-2
13.
TemsRAl ZahraniAM.Cost of corrosion in oil production and refining. Saudi Aramco J Technol. 2006;2–14.
GillardT.Natural gas pipeline rupture and fire. Loss Prev Bull. 2000;152:17–17. doi:10.1205/026095700522372
21.
DuquetteDJSchafrikRETortorelliPF.Research opportunities in corrosion science. Washington, DC: National Academy of Sciences, The National Academies Press; 2011.
22.
WesslingB.Effective corrosion protection with the organic metal polyaniline: basic principles and recent progress. ACS Symp Ser. 2003:34–73. doi:10.1021/bk-2003-0843.ch003
23.
MontemorMF.Functional and smart coatings for corrosion protection: a review of recent advances. Surf Coatings Technol. 2014;258:17–37. doi:10.1016/j.surfcoat.2014.06.031
24.
Presuel-MorenoFJakabMATailleartNCorrosion-resistant metallic coatings. Mater Today. 2008;11:14–23. doi:10.1016/S1369-7021(08)70203-7
25.
HuRGZhangSBuJFRecent progress in corrosion protection of magnesium alloys by organic coatings. Prog Org Coatings. 2012;73:129–141. doi:10.1016/j.porgcoat.2011.10.011
26.
AsmatuluR.Nanocoatings for corrosion protection of aerospace alloys. Woodhead Publishing; 2012. https://doi.org/10.1533/9780857095800.2.357
27.
ZengZWangLLiangATribological and electrochemical behavior of thick Cr–C alloy coatings electrodeposited in trivalent chromium bath as an alternative to conventional Cr coatings. Electrochim Acta. 2006;52:1366–1373. doi:10.1016/j.electacta.2006.07.038
KeongKGShaW.Crystallisation and phase transformation behaviour of electroless nickel-phosphorus deposits and their engineering properties. Surface Eng. 2013;18:329–343. doi:10.1179/026708402225010010
YooYHLeeSHKimJSGSEffect of heat treatment on the corrosion resistance of Ni-based and Cu-based amorphous alloy coatings. J Alloys Compd. 2008;461:304–311. doi:10.1016/J.JALLCOM.2007.06.118
35.
KimJKangKYoonSEnhancement of metallic glass properties of Cu-based BMG coating by shroud plasma spraying. Surf Coatings Technol. 2011;205:3020–3026. doi:10.1016/j.surfcoat.2010.11.012
36.
WangZMaLHanBInfluence of parameters on the cold spraying FeCoCrMoBCY amorphous coatings. Surf Eng. 2021;37:545–557. doi:10.1080/02670844.2020.1805716
37.
LiangDMaJCaiYCharacterization and elevated-temperature tribological performance of AC–HVAF-sprayed Fe-based amorphous coating. Surf Coatings Technol. 2020;387:125535. doi:10.1016/j.surfcoat.2020.125535
38.
KlementWWillensRHDuwezP.Non-crystalline structure in solidified gold–silicon alloys. Nature. 1960;187:869–870. doi:10.1038/187869b0
39.
InoueA.Stabilization of metallic supercooled liquid and bulk amorphous alloys. Acta Mater. 2000;48:279–306. doi:10.1016/S1359-6454(99)00300-6
40.
SuryanarayanaCInoueA.Iron-based bulk metallic glasses. Int Mater Rev. 2013;58:131–166. doi:10.1179/1743280412Y.0000000007
41.
LiHXLuZCWangSLFe-based bulk metallic glasses: glass formation, fabrication, properties and applications. Prog Mater Sci. 2019;103:235–318. doi:10.1016/j.pmatsci.2019.01.003
NakaM.Corroison resistivity of amorphous iron alloys containing chromium. J Japan Inst Met. 1974;38:835–841.
44.
NakaMHashimotoKMasumotoT.High corrosion resistance of Cr-bearing amorphous Fe alloys in neutral and acidic solutions containing chloride. Corrosion. 1975;32(4):146–152.
45.
MasumotoTHashimotoK.Chemical properties of amorphous metals. Annu Rev Mater Sci. 1978;8:215–233. doi:10.1146/annurev.ms.08.080178.001243
46.
HashimotoKOsadaKMetalsO.Characteristics of passivity of extremely corrosion-resistant amorphous iron alloys. Corros Sci. 1976;16:71–76.
47.
HashimotoKMasumotoT.Extremely high corrosion-resistance of chromium-containing amorphous iron-alloys. Mater Sci Eng. 1976;23:285–288.
48.
AsamiKNakaMHashimotoKEffect of molybdenum on the anodic behavior of amorphous Fe–Cr–Mo–B alloys in hydrochloric acid. J Electrochem Soc Electrochem Sci Technol. 1980;127:2130–2138.
49.
NakaMHashimotoKMasumotoT.Effect of heat treatment on corrosion behavior of amorphous Fe–Cr–P–C and Fe–Ni–Cr–P–B alloys in 1N HCI. Corrosion. 1980;36:679–686.
50.
AsamiKHashimotoKMasumotoTESCA study of the passive film on an extremely corrosion-resistant amorphous iron alloy. Corros Sci. 1976;16:909–914. doi:10.1016/S0010-938X(76)80010-8
51.
HashimotoK.2002 W.R. Whitney award lecture: In pursuit of new corrosion-resistant alloys. Corrosion. 2002;58:715–722. doi:10.5006/1.3277653
52.
AsamiKHashimotoKShimodairaS.XPS determination of compositions of alloy surfaces and surface oxides on mechanically polished iron-chromium alloys. Corros Sci. 1977;17:713–723. doi:10.1016/0010-938X(77)90067-1
53.
AsamiKHashimotoKShimodairaS.An XPS study of the passivity of a series of iron-chromium alloys in sulphuric acid. Corros Sci. 1978;18:151–160. doi:10.1016/S0010-938X(78)80085-7
54.
KobayashiKHashimotoKMasumotoT.Spontaneously passivating amorphous Fe–Cr–Mo–metalloid alloys in 6 N HCl at room temperature and 80°C. Sci Reports Res Instit Tohoku Univ Ser A Phys Chem Metall. 1980;29:284–295.
55.
HabazakiHKawashimaAAsamiKThe corrosion behavior of amorphous Fe–Cr–Mo–P–C and Fe–Cr–W–P–C alloys in 6 M HCl solution. Corros Sci. 1992;33:225–236. doi:10.1016/0010-938X(92)90147-U
56.
TanMWAkiyamaEHabazakiHThe role of chromium and molybdenum in passivation of amorphous Fe–Cr–Mo–P–C alloys in de-aerated 1 M HCl. Corros Sci. 1996;38:2137–2151. doi:10.1016/S0010-938X(96)00071-6
57.
HashimotoKNakaMAsamiKAn x-ray photo-electron spectroscopy study of the passivity of amorphous Fe–Mo alloys. Corros Sci. 1979;19:165–170. doi:10.1016/0010-938X(79)90014-3
58.
InoueAGookJS.Fe-based ferromagnetic glassy alloys with wide supercooled liquid region. Mater Trans JIM. 1995;36:1180–1183. doi:10.2320/matertrans1989.36.1180
59.
HirataAHirotsuYAmiyaKCrystallization process and glass stability of an Fe48Cr15 Mo14C15B6Tm2 bulk metallic glass. Phys Rev B Condens Matter Mater Phys. 2008;78:2–7. doi:10.1103/PhysRevB.78.144205
60.
PangSJZhangTAsamiKSynthesis of Fe–Cr–Mo–C–B–P bulk metallic glasses with high corrosion resistance. Acta Mater. 2002;50:489–497. doi:10.1016/S1359-6454(01)00366-4
61.
PangSJZhangTAsamiKBulk glassy Fe–Cr–Mo–C–B alloys with high corrosion resistance. Corros Sci. 2002;44:1847–1856. doi:10.1016/S0010-938X(02)00002-1
62.
PangSZhangTAsamiKEffects of chromium on the glass formation and corrosion behavior of bulk glassy Fe–Cr–Mo–C–B alloys. Mater Trans. 2002;43:2137–2142. doi:10.2320/matertrans.43.2137
63.
FayDL.Corrosion resistances of iron-based amorphous metals with yttrium and tungsten additions in Hot calcium chloride brine & natural seawater – Fe48Mo14Cr15Y2C15B6 and W-containing variants. Angew Chemie Int Ed. 6(11):951–952; 1967;3:485–496.
64.
MiuraHIsaSOmuroK.Production of amorphous iron-nickel based alloys by flame-spray quenching and coatings on metal substrates. Trans Japan Inst Met. 1984;25:284–291.
OtsuboFEraHKishitakeK.Formation of amorphous Fe–Cr–Mo–8P–2C coatings by the high velocity oxy-fuel process. J Therm Spray Technol. 2000;9:494–498. doi:10.1361/105996300770349700
67.
FarmerJCHaslamJJDaySDCorrosion resistance of thermally sprayed high-boron iron-based amorphous-metal coatings: Fe49.7Cr17.7 Mn1.9Mo7.4W1.6B15.2 C3.8Si2.4. J Mater Res. 2007;22:2297–2311. doi:10.1557/jmr.2007.0291
68.
FarmerJChoiJ-SSSawCIron-Based amorphous metals: high-performance corrosion-resistant material development. Metall Mater Trans A Phys Metall Mater Sci. 2009;40:1289–1305. doi:10.1007/s11661-008-9779-8
69.
FarmerJCHaslamJJDaySD. Corrosion characterization of iron-based high-performance amorphous metal thermal-spray coatings. Proceedings of the ASME 2005 Pressure Vessels and Piping Conference. Volume 7: Operations, Applications, and Components. Denver, Colorado, USA. 2005:583–589.
70.
FarmerJCHaslamJJDaySD Corrosion resistance of iron-based amorphous metal coatings. Proceedings of the ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference. Volume 7: Operations, Applications, and Components. Vancouver, BC, Canada. 2006;685–691. doi:10.1115/PVP2006-ICPVT-11-93835.
71.
FarmerJHaslamJDayDA high-performance corrosion-resistant iron-based amorphous metal-the effects of composition, structure and environment on corrosion resistance. Mater Res Soc Symp Proc. 2007;985:255–260. doi:10.1557/proc-985-0985-nn08-03
ChuZDengWZhengXCorrosion mechanism of plasma-sprayed Fe-based amorphous coatings with high corrosion resistance. J Therm Spray Technol. 2020;29:1111–1118. doi:10.1007/s11666-020-01030-9
74.
SiCDuanBZhangQMicrostructure, corrosion-resistance, and wear-resistance properties of subsonic flame sprayed amorphous Fe–Mo–Cr–Co coating with extremely high amorphous rate. Integr Med Res. 2020: 1–12. doi:10.1016/j.jmrt.2020.01.024
75.
HuangFKangJYueWCorrosion behavior of FeCrMoCBY amorphous coating fabricated by high-velocity air fuel spraying. J Therm Spray Technol. 2019;28:842–850. doi:10.1007/s11666-019-00843-7
76.
CaoQHuangGMaLComparison of a cold-sprayed and plasma-sprayed Fe25Cr20Mo1Si amorphous alloy coatings on 40Cr substrates. Mater Corros. 2020;71:1872–1884. doi:10.1002/maco.202011558
77.
HenaoJConcustellACanoINovel Al-based metallic glass coatings by cold gas spray. Mater Des. 2016;94:253–261. doi:10.1016/j.matdes.2016.01.040
78.
ChengJWangBLiuQIn-situ synthesis of novel Al–Fe–Si metallic glass coating by arc spraying. J Alloys Compd. 2017;716:88–95. doi:10.1016/j.jallcom.2017.05.032
79.
WangAPZhangTWangJQ.Formation and properties of Ni-based amorphous metallic coating produced by HVAF thermal spraying. Mater Trans. 2005;46:1010–1015. doi:10.2320/MATERTRANS.46.1010
80.
YugeswaranSKobayashiA.Metallic glass coatings fabricated by gas tunnel type plasma spraying. Vacuum. 2014;110:177–182. doi:10.1016/J.VACUUM.2014.04.016
81.
LahiriDGillPKScudinoSCold sprayed aluminum based glassy coating: synthesis, wear and corrosion properties. Surf Coatings Technol. 2013;232:33–40. doi:10.1016/J.SURFCOAT.2013.04.049
82.
GeYChengJYanCThermally induced microstructure evolution and effects on the corrosion behaviors of AlFeSi metallic glass coatings. Intermetallics. 2022;143:107473. doi:10.1016/J.INTERMET.2022.107473
83.
LeeKAJungDJParkDYStudy on the fabrication and physical properties of cold-sprayed, Cu-based amorphous coating. J Phys Conf Ser. 2009;144:012113. doi:10.1088/1742-6596/144/1/012113
84.
MaoXWangYJiangJMicrostructure and corrosion properties of micro-nano FeCoNiCrMnAl0.5 coatings fabricated by plasma spraying. Mater Lett. 2022;314:131855. doi:10.1016/J.MATLET.2022.131855
85.
HuangBZhangCZhangGWear and corrosion resistant performance of thermal-sprayed Fe-based amorphous coatings: a review. Surf Coatings Technol. 2019;377:124896. doi:10.1016/j.surfcoat.2019.124896
86.
GuoWWuYZhangJFabrication and characterization of thermal-sprayed Fe-based amorphous/nanocrystalline composite coatings: an overview. J Therm Spray Technol. 2014;23:1157–1180. doi:10.1007/s11666-014-0096-z
JoshiSSKatakamSSingh AroraHAmorphous coatings and surfaces on structural materials. Crit Rev Solid State Mater Sci. 2016;41:1–46. doi:10.1080/10408436.2015.1053602
89.
SouzaCACRibeiroDVKiminamiCS.Corrosion resistance of Fe–Cr-based amorphous alloys: an overview. J Non Cryst Solids. 2016;442:56–66. doi:10.1016/j.jnoncrysol.2016.04.009
BuschRSchroersJWangWH.Thermodynamics and kinetics of bulk metallic glass. MRS Bull. 2007;32:620–623. doi:10.1557/MRS2007.122
93.
FechtHJJohnsonWL.Thermodynamic properties and metastability of bulk metallic glasses. Mater Sci Eng A. 2004;375–377:2–8. doi:10.1016/j.msea.2003.10.254
94.
EckertJDasJPaulySMechanical properties of bulk metallic glasses and composites. J Mater Res. 2007;22:285–301. doi:10.1557/JMR.2007.0050
95.
ChattopadhyayCIduryKSNSBhattJCritical evaluation of glass forming ability criteria. Mater Sci Technol (United Kingdom). 2016;32:380–400. doi:10.1179/1743284715Y.0000000104
96.
Ramakrishna RaoBSrinivasMShahAKA new thermodynamic parameter to predict glass forming ability in iron based multi-component systems containing zirconium. Intermetallics. 2013;35:73–81. doi:10.1016/j.intermet.2012.11.020
97.
WuYHuiXDLuZPEffects of metalloid elements on the glass-forming ability of Fe-based alloys. J Alloys Compd. 2009;467:187–190. doi:10.1016/j.jallcom.2007.12.002
98.
JiaoZBLiHXGaoJEEffects of alloying elements on glass formation, mechanical and soft-magnetic properties of Fe-based metallic glasses. Intermetallics. 2011;19:1502–1508. doi:10.1016/j.intermet.2011.05.020
99.
LuZPLiuCTThompsonJRStructural amorphous steels. Phys Rev Lett. 2004;92:1–4. doi:10.1103/PhysRevLett.92.245503
100.
LiHXGaoJEWuYEnhancing glass-forming ability via frustration of nano-clustering in alloys with a high solvent content. Sci Rep. 2013;3:1–8. doi:10.1038/srep01983
101.
InoueAShinoharaYGookJS.Thermal and magnetic properties of bulk Fe-based glassy alloys prepared by copper mold casting. Mater Trans JIM. 1995;36:1427–1433.
102.
InoueAShenBLChangCT.Super-high strength of over 4000 MPa for Fe-based bulk glassy alloys in [(Fe1-xCox)0.75B0.2Si0.05]96Nb4 system. Acta Mater. 2004;52:4093–4099. doi:10.1016/j.actamat.2004.05.022
103.
YaoJHWangJQLiY.Ductile Fe–Nb–B bulk metallic glass with ultrahigh strength. Appl Phys Lett. 2008;92:2–5. doi:10.1063/1.2949747
104.
HuangDLiRHuangLFretting wear behavior of bulk amorphous steel. Intermetallics. 2011;19:1385–1389. doi:10.1016/j.intermet.2011.04.014
105.
GuoSFChanKCXieSHNovel centimeter-sized Fe-based bulk metallic glass with high corrosion resistance in simulated acid rain and seawater. J Non Cryst Solids. 2013;369:29–33. doi:10.1016/j.jnoncrysol.2013.02.026
106.
GuoSSuC.Micro/nano ductile-phases reinforced Fe-based bulk metallic glass matrix composite with large plasticity. Mater Sci Eng A. 2017;707:44–50. doi:10.1016/j.msea.2017.09.036
107.
LiYCZhangCXingWDesign of Fe-based bulk metallic glasses with improved wear resistance. ACS Appl Mater Interfaces. 2018;10:43144–43155. doi:10.1021/acsami.8b11561
108.
LiZZhangCLiuL.Wear behavior and corrosion properties of Fe-based thin film metallic glasses. J Alloys Compd. 2015;650:127–135. doi:10.1016/j.jallcom.2015.07.256
109.
WangSLZhangZYGongYBMicrostructures and corrosion resistance of Fe-based amorphous/nanocrystalline coating fabricated by laser cladding. J Alloys Compd. 2017;728:1116–1123. doi:10.1016/j.jallcom.2017.08.251
110.
YeXShinYC.Synthesis and characterization of Fe-based amorphous composite by laser direct deposition. Surf Coatings Technol. 2014;239:34–40. doi:10.1016/J.SURFCOAT.2013.11.013
111.
WangHZChengYHZhangXCEffect of laser scanning speed on microstructure and properties of Fe based amorphous/ nanocrystalline cladding coatings. Mater Chem Phys. 2020;250:123091. doi:10.1016/J.MATCHEMPHYS.2020.123091
112.
WangHZChengYHYangJYMicrostructure and properties of laser clad Fe-based amorphous alloy coatings containing Nb powder. J Non Cryst Solids. 2020;550:120351. doi:10.1016/J.JNONCRYSOL.2020.120351
113.
ChenLTLeeJWYangYCMicrostructure, mechanical and anti-corrosion property evaluation of iron-based thin film metallic glasses. Surf Coatings Technol. 2014;260:46–55. doi:10.1016/J.SURFCOAT.2014.07.039
114.
ObeydaviAShafyeiARezaeianAMicrostructure, mechanical properties and corrosion performance of Fe44Cr15Mo14Co7C10B5Si5 thin film metallic glass deposited by DC magnetron sputtering. J Non Cryst Solids. 2020;527:119718. doi:10.1016/J.JNONCRYSOL.2019.119718
ZhangJLiuMSongJMicrostructure and corrosion behavior of Fe-based amorphous coating prepared by HVOF. J Alloys Compd. 2017;721:506–511. doi:10.1016/j.jallcom.2017.06.046
117.
GuoYKogaGYJorgeAMMicrostructural investigation of Fe[sbnd]Cr[sbnd]Nb[sbnd]B amorphous/nanocrystalline coating produced by HVOF. Mater Des. 2016;111:608–615. doi:10.1016/j.matdes.2016.09.027
LiuXQZhengYGChangXCMicrostructure and properties of Fe-based amorphous metallic coating produced by high velocity axial plasma spraying. J Alloys Compd. 2009;484:300–307. doi:10.1016/j.jallcom.2009.04.086
120.
ChengJBLiangXBXuBSFormation and properties of Fe-based amorphous/nanocrystalline alloy coating prepared by wire arc spraying process. J Non Cryst Solids. 2009;355:1673–1678. doi:10.1016/j.jnoncrysol.2009.06.024
121.
LinJWangZChengJEvaluation of cavitation erosion resistance of arc-sprayed Fe-based amorphous/nanocrystalline coatings in NaCl solution. Results Phys. 2019;12:597–602. doi:10.1016/j.rinp.2018.12.007
122.
KishitakeKEraHOtsuboF.Characterization of plasma sprayed Fe–17Cr–38Mo–4C amorphous coatings crystallizing at extremely high temperature. J Therm Spray Technol. 1996;5:283–288. doi:10.1007/BF02645879
123.
BranaganDJSwankWDHaggardDCWear-resistant amorphous and nanocomposite steel coatings. Metall Mater Trans A Phys Metall Mater Sci. 2001;32:2615–2621. doi:10.1007/s11661-001-0051-8
124.
OtsuboFKishitakeK.Corrosion resistance of Fe–16%Cr–30%Mo-(C,B,P) amorphous coatings sprayed by HVOF and APS processes. Mater Trans. 2005;46:80–83.
125.
AjdelsztajnLJodoinBRicherPCold gas dynamic spraying of iron-base amorphous alloy. Proc Int Therm Spray Conf. 2006;15:495–500. doi:10.1361/105996306X146857
126.
KobayashiAYanoSKimuraHFe-based metallic glass coatings produced by smart plasma spraying process. Mater Sci Eng B Solid-State Mater Adv Technol. 2008;148:110–113. doi:10.1016/j.mseb.2007.09.035
127.
WuYLinPWangZMicrostructure and microhardness characterization of a Fe-based coating deposited by high-velocity oxy-fuel thermal spraying. J Alloys Compd. 2009;481:719–724. doi:10.1016/j.jallcom.2009.03.099
ZhouZWangLWangFCFormation and corrosion behavior of Fe-based amorphous metallic coatings prepared by detonation gun spraying. Trans Nonferrous Met Soc China (English Ed). 2009;19. doi:10.1016/S1003-6326(10)60123-9
130.
ChokethawaiKMcCartneyDGShipwayPH.Microstructure evolution and thermal stability of an Fe-based amorphous alloy powder and thermally sprayed coatings. J Alloys Compd. 2009;480:351–359. doi:10.1016/j.jallcom.2009.02.035
131.
KumarSKimJKimHPhase dependence of Fe-based bulk metallic glasses on properties of thermal spray coatings. J Alloys Compd. 2009;475:10–13. doi:10.1016/j.jallcom.2008.07.064
132.
FuBHeDYZhaoLD.Effect of heat treatment on the microstructure and mechanical properties of Fe-based amorphous coatings. J Alloys Compd. 2009;480:422–427. doi:10.1016/j.jallcom.2009.02.107
133.
ZoisDLekatouAVardavouliasM.Preparation and characterization of highly amorphous HVOF stainless steel coatings. J Alloys Compd. 2010;504; doi:10.1016/j.jallcom.2010.02.062
134.
MovahediBEnayatiMHWongCC.Structural and thermal behavior of Fe–Cr–Mo–P–B–C–Si amorphous and nanocrystalline HVOF coatings. J Therm Spray Technol. 2010;19:1093–1099. doi:10.1007/s11666-010-9507-y
135.
GuoRQZhangCChenQStudy of structure and corrosion resistance of Fe-based amorphous coatings prepared by HVAF and HVOF. Corros Sci. 2011;53:2351–2356. doi:10.1016/j.corsci.2010.12.022
136.
LuWWuYZhangJJMicrostructure and corrosion resistance of plasma sprayed Fe-based alloy coating as an alternative to hard chromium. J Therm Spray Technol. 2011;20:1063–1070. doi:10.1007/s11666-010-9611-z
137.
LiuGAnYGuoZStructure and corrosion behavior of iron-based metallic glass coatings prepared by LPPS. Appl Surf Sci. 2012;258:5380–5386. doi:10.1016/j.apsusc.2012.02.015
138.
ChengJBWangZHXuBS.Wear and corrosion behaviors of FeCrBSiNbW amorphous/nanocrystalline coating prepared by arc spraying process. J Therm Spray Technol. 2012;21:1025–1031. doi:10.1007/s11666-012-9779-5
139.
HuangYGuoYFanHSynthesis of Fe–Cr–Mo–C–B amorphous coating with high corrosion resistance. Mater Lett. 2012;89:229–232. doi:10.1016/j.matlet.2012.08.114
140.
WangYZhengYGKeWCorrosion of high-velocity oxy-fuel (HVOF) sprayed iron-based amorphous metallic coatings for marine pump in sodium chloride solutions. Mater Corros. 2012;63:685–694. doi:10.1002/maco.201106211
141.
GuoRQZhangCYangYCorrosion and wear resistance of a Fe-based amorphous coating in underground environment. Intermetallics. 2012;30:94–99. doi:10.1016/j.intermet.2012.03.026
142.
JiangCPXingYZZhangFYMicrostructure and corrosion resistance of Fe/Mo composite amorphous coatings prepared by air plasma spraying. Int J Miner Metall Mater. 2012;19:657–662. doi:10.1007/s12613-012-0609-z
143.
ChenYLiangXBaiJHigh velocity electric arc sprayed Fe–Al–Nb–B composite coating and its wear behavior. Acta Metall Sin (English Lett). 2013;26:313–320. doi:10.1007/s40195-013-0017-z
144.
VaradaraajanVGuduruRKMohantyPS.Synthesis and microstructural evolution of amorphous/nanocrystalline steel coatings by different thermal-spray processes. J Therm Spray Technol. 2013;22:452–462. doi:10.1007/s11666-013-9885-z
145.
PiaoZYXuBSWangHDCharacterization of Fe-based alloy coating deposited by supersonic plasma spraying. Fusion Eng Des. 2013;88:2933–2938. doi:10.1016/j.fusengdes.2013.06.013
146.
YugeswaranSKobayashiASureshKCharacterization of gas tunnel type plasma sprayed TiN reinforced Fe-based metallic glass coatings. J Alloys Compd. 2013;551:168–175. doi:10.1016/j.jallcom.2012.09.111
147.
WangSLChengJCYiSHCorrosion resistance of Fe-based amorphous metallic matrix coating fabricated by HVOF thermal spraying. Trans Nonferrous Met Soc China (English Ed). 2014;24:146–151. doi:10.1016/S1003-6326(14)63040-5
148.
AnYHouGChenJMicrostructure and tribological properties of iron-based metallic glass coatings prepared by atmospheric plasma spraying. Vacuum. 2014;107:132–140. doi:10.1016/j.vacuum.2014.04.021
149.
ZhangHXieYHuangLEffect of feedstock particle sizes on wear resistance of plasma sprayed Fe-based amorphous coatings. Surf Coatings Technol. 2014;258:495–502. doi:10.1016/j.surfcoat.2014.08.050
150.
ChoiSJLeeHSJangJWCorrosion behavior in a 3.5 wt% NaCl solution of amorphous coatings prepared through plasma-spray and cold-spray coating processes. Met Mater Int. 2014;20:1053–1057. doi:10.1007/s12540-014-6008-4
151.
WangYXingZZLuoQCorrosion and erosion-corrosion behaviour of activated combustion high-velocity air fuel sprayed Fe-based amorphous coatings in chloride-containing solutions. Corros Sci. 2015;98:339–353. doi:10.1016/j.corsci.2015.05.044
152.
ConcustellAHenaoJDostaSOn the formation of metallic glass coatings by means of cold gas spray technology. J Alloys Compd. 2015;651:764–772. doi:10.1016/j.jallcom.2015.07.270
153.
WangGHuangZXiaoPSpraying of Fe-based amorphous coating with high corrosion resistance by HVAF. J Manuf Process. 2016;22:34–38. doi:10.1016/j.jmapro.2016.01.009
154.
ChuZYangYChenXCharacterization and tribology performance of Fe-based metallic glassy composite coatings fabricated by gas multiple-tunnel plasma spraying. Surf Coatings Technol. 2016;292:44–48. doi:10.1016/j.surfcoat.2016.03.024
155.
ZhouYYMaGZWangHDFabrication and characterization of supersonic plasma sprayed Fe-based amorphous metallic coatings. Mater Des. 2016;110:332–339. doi:10.1016/j.matdes.2016.08.003
156.
MaHRChenXYLiJWFe-based amorphous coating with high corrosion and wear resistance. Surf Eng. 2017;33:56–62. doi:10.1080/02670844.2016.1176718
157.
MaHRLiJWChangCTPassivation behavior of Fe-based amorphous coatings prepared by high-velocity air/oxygen fuel processes. J Therm Spray Technol. 2017;26:2040–2047. doi:10.1007/s11666-017-0647-1
158.
WuHLanXDLiuYFabrication, tribological and corrosion behaviors of detonation gun sprayed Fe-based metallic glass coating. Trans Nonferrous Met Soc China (English Ed). 2016;26:1629–1637. doi:10.1016/S1003-6326(16)64271-1
159.
KogaGYSchulzRSavoieSMicrostructure and wear behavior of Fe-based amorphous HVOF coatings produced from commercial precursors. Surf Coatings Technol. 2017;309:938–944. doi:10.1016/j.surfcoat.2016.10.057
160.
ZhangCChuZWeiFOptimizing process and the properties of the sprayed Fe-based metallic glassy coating by plasma spraying. Surf Coatings Technol. 2017;319:1–5. doi:10.1016/j.surfcoat.2017.03.063
161.
LiDChenXHuiXEffect of amorphicity of HVOF sprayed Fe-based coatings on their corrosion performances and contacting osteoblast behavior. Surf Coatings Technol. 2017;310:207–213. doi:10.1016/j.surfcoat.2016.12.092
162.
LuoQSunYJJiaoJFormation and tribological behavior of AC-HVAF-sprayed nonferromagnetic Fe-based amorphous coatings. Surf Coatings Technol. 2018;334:253–260. doi:10.1016/j.surfcoat.2017.11.042
ZiemianCWWrightWJCipolettiDE.Influence of impact conditions on feedstock deposition behavior of cold-sprayed Fe-based metallic glass. J Therm Spray Technol. 2018;27:843–856. doi:10.1007/s11666-018-0720-4
165.
ChenSYMaGZWangHDSolidification mechanism and quantitative characterization of Fe-based amorphous splat formed by plasma sprayed droplets with different in-flight status. J Alloys Compd. 2018;768:789–799. doi:10.1016/j.jallcom.2018.07.005
166.
ZhangBChengJLiangX.Effects of Cr and Mo additions on formation and mechanical properties of arc-sprayed FeBSiNb-based glassy coatings. J Non Cryst Solids. 2018;499:245–251.
SadeghiEJoshiS.Chlorine-induced high-temperature corrosion and erosion-corrosion of HVAF and HVOF-sprayed amorphous Fe-based coatings. Surf Coatings Technol. 2019;371:20–35. doi:10.1016/j.surfcoat.2019.01.080
169.
DongQZhangBBaZMicrostructure and properties of FeCrNiMoCBSi amorphous/nanocrystalline composite coatings via plasma spraying process. Surf Topogr Metrol Prop. 2019;7; doi:10.1088/2051-672X/ab411b
170.
KumarAKumarRBijalwanPFe-based amorphous/nanocrystalline composite coating by plasma spraying: effect of heat input on morphology, phase evolution and mechanical properties. J Alloys Compd. 2019;771:827–837. doi:10.1016/j.jallcom.2018.09.024
171.
SiCWuW.Excellent corrosion resistant amorphous coating prepared by gas atomization followed by AC-HVAF spray technology. Mater Res Express. 2019;6:55202. doi:10.1088/2053-1591/ab0250
172.
XieLXiongXZengYThe wear properties and mechanism of detonation sprayed iron-based amorphous coating. Surf Coatings Technol. 2019;366:146–155. doi:10.1016/j.surfcoat.2019.03.028
173.
HamGSKimKWChoGSFabrication, microstructure and wear properties of novel Fe–Mo–Cr–C–B metallic glass coating layers manufactured by various thermal spray processes. Mater Des. 2020;195:109043. doi:10.1016/j.matdes.2020.109043
174.
KimKWHamGSChoGSMicrostructures and corrosion properties of novel Fe46.8–Mo30.6–Cr16.6–C4.3–B1.7 metallic glass coatings manufactured by vacuum plasma spray process. Intermetallics. 2021;130:107061. doi:10.1016/J.INTERMET.2020.107061
175.
NayakSKKumarASarkarKA study on the corrosion inhibition of Fe-based amorphous/nanocrystalline coating synthesized by high-velocity oxy-fuel spraying in an extreme environment. J Therm Spray Technol. 2019;28:1433–1447. doi:10.1007/s11666-019-00907-8
176.
KumarANayakSKSarkarKInvestigation of nano- and micro-scale structural evolution and resulting corrosion resistance in plasma sprayed Fe-based (Fe–Cr–B–C–P) amorphous coatings. Surf Coatings Technol. 2020;397:126058. doi:10.1016/j.surfcoat.2020.126058
177.
NingWZhaiHXiaoRThe corrosion resistance mechanism of Fe-based amorphous coatings synthesised by detonation Gun spraying. J Mater Eng Perform. 2020;29:3921–3929. doi:10.1007/s11665-020-04876-w
178.
ZhouZHanF-XYaoH-HNovel Fe-based amorphous composite coating with a unique interfacial layer improving thermal barrier application. ACS Appl Mater Interfaces. 2021;13:23057–23066. doi:10.1021/ACSAMI.0C22868
179.
LeeHBLinTJLeeCY.Corrosion of high-velocity-oxygen-fuel (HVOF) sprayed non-crystalline alloy coating in marine environment. Surf Coatings Technol. 2021;409:126896. doi:10.1016/J.SURFCOAT.2021.126896
180.
LinTJSheuHHLeeCYThe study of mechanical properties and corrosion behavior of the Fe-based amorphous alloy coatings using high velocity oxygen fuel spraying. J Alloys Compd. 2021;867:159132.
181.
LeeCYLinTJSheuHHA study on corrosion and corrosion-wear behavior of Fe-based amorphous alloy coating prepared by high velocity oxygen fuel method. J Mater Res Technol. 2021;15:4880–4895. doi:10.1016/J.JMRT.2021.10.103
182.
SunYJYangRXieLInterfacial bonding and corrosion behaviors of HVOF-sprayed Fe-based amorphous coating on 8090 Al–Li alloy. Surf Coatings Technol. 2022;436:128316. doi:10.1016/J.SURFCOAT.2022.128316
183.
LiuXWuYQiuZSimultaneously enhancing wear and corrosion resistance of HVAF-sprayed Fe-based amorphous coating from Mo clad feedstock. J Mater Process Technol. 2022;302:117465. doi:10.1016/J.JMATPROTEC.2021.117465
184.
LiangDZhouYLiuXWettability and corrosion performance of arc-sprayed Fe-based amorphous coatings. Surf Coatings Technol. 2022;433:128129. doi:10.1016/J.SURFCOAT.2022.128129
185.
PanPZhouWZhaoYHot corrosion behavior of an arc sprayed Fe-based amorphous coating in a simulated biomass firing environment. Corros Sci. 2022;194:109938. doi:10.1016/J.CORSCI.2021.109938
186.
ShiMPangSZhangT.Towards improved integrated properties in FeCrPCB bulk metallic glasses by Cr addition. Intermetallics. 2015;61:16–20. doi:10.1016/j.intermet.2015.02.010
187.
ArcherMDCorkeCCHarjiBH.The electrochemical properties of metallic glasses. Electrochim Acta. 1987;32:13–26. doi:10.1016/0013-4686(87)87002-0
188.
HashimotoKAsamiKNakaMThe role of alloying elements in improving the corrosion resistance of amorphous iron base alloys. Corros Sci. 1979;19:857–867. doi:10.1016/S0010-938X(79)80080-3
189.
ZhangSDLiuZWWangZMIn situ EC-AFM study of the effect of nanocrystals on the passivation and pit initiation in an Al-based metallic glass. Corros Sci. 2014;83:111–123. doi:10.1016/j.corsci.2014.02.005
190.
MillerMLiawP.Bulk metallic glasses – an overview. Germany: Springer US; 2007.
191.
ScullyJRGebertAPayerJH.Corrosion and related mechanical properties of bulk metallic glasses. J Mater Res. 2007;22:302–313. doi:10.1557/jmr.2007.0051
192.
HasannaeimiVSadeghilaridjaniMMukherjeeS.Electrochemical and corrosion behavior of metallic glasses. Switzerland: MDPI AG; 2021.
193.
WangSLLiHXZhangXFEffects of Cr contents in Fe-based bulk metallic glasses on the glass forming ability and the corrosion resistance. Mater Chem Phys. 2009;113:878–883. doi:10.1016/j.matchemphys.2008.08.057
194.
ShenBAkibaMInoueA.Effect of Cr addition on the glass-forming ability, magnetic properties, and corrosion resistance in FeMoGaPCBSi bulk glassy alloys. J Appl Phys. 2006;100; doi:10.1063/1.2335393
195.
LongZLShaoYDengXHCr effects on magnetic and corrosion properties of Fe–Co–Si–B–Nb–Cr bulk glassy alloys with high glass-forming ability. Intermetallics. 2007;15:1453–1458. doi:10.1016/j.intermet.2007.05.002
196.
PardoAOteroEMerinoMCThe influence of Cr addition on the corrosion in marine environments. Corros Sci. 2002;44:1193–1211.
197.
PardoAMerinoMCOteroEInfluence of Cr additions on corrosion resistance of Fe- and Co-based metallic glasses and nanocrystals in H2SO4. J Non Cryst Solids. 2006;352:3179–3190. doi:10.1016/j.jnoncrysol.2006.05.021
198.
WangSLYiS.The corrosion behaviors of Fe-based bulk metallic glasses in a sulfuric solution at 70°C. Intermetallics. 2010;18:1950–1953. doi:10.1016/j.intermet.2010.01.020
199.
LiJYangLMaHImproved corrosion resistance of novel Fe-based amorphous alloys. Mater Des. 2016;95:225–230. doi:10.1016/j.matdes.2016.01.100
200.
XuDDZhouBLWangQQEffects of Cr addition on thermal stability, soft magnetic properties and corrosion resistance of FeSiB amorphous alloys. Corros Sci. 2018;138:20–27. doi:10.1016/j.corsci.2018.04.006
201.
LiXQinCKatoHMo microalloying effect on the glass-forming ability, magnetic, mechanical and corrosion properties of (Fe0.76Si0.096B 0.084P0.06)100-xMox bulk glassy alloys. J Alloys Compd. 2011;509:7688–7691. doi:10.1016/j.jallcom.2011.04.081
202.
PangSZhangTAsamiKFormation of bulk glassy Fe75–x–yCrxMoyC15B10 alloys and their corrosion behavior. J Mater Res. 2002;17:701–704. doi:10.1557/JMR.2002.0100
203.
TanMWAkiyamaEKawashimaAThe influences of Mo addition and air exposure on the corrosion behavior of amorphous Fe–8Cr–13P–7C alloy in de-aerated 1 M HCl. Corros Sci. 1996;38:349–365. doi:10.1016/0010-938X(96)00133-3
204.
MarcusP.On some fundamental factors in the effect of alloying elements on passivation of alloys. Corros Sci. 1994;36:2155–2158. doi:10.1016/0010-938X(94)90013-2
WasedaYAustKT.Corrosion behaviour of metallic glasses. J Mater Sci. 1981;16:2337–2359. doi:10.1007/BF01113569
207.
PangSZhangTAsamiKNew Fe–Cr–Mo–(Nb, Ta)–C–B glassy alloys with high glass-forming ability and good corrosion resistance. Mater Trans. 2001;42:376–379.
208.
LongZLChangCTDingYHCorrosion behavior of Fe-based ferromagnetic (Fe, Ni)–B–Si–Nb bulk glassy alloys in aqueous electrolytes. J Non Cryst Solids. 2008;354:4609–4613. doi:10.1016/j.jnoncrysol.2008.06.009
209.
ZohdiHShahverdiHRHadaviSMM.Effect of Nb addition on corrosion behavior of Fe-based metallic glasses in Ringer’s solution for biomedical applications. Electrochem Commun. 2011;13:840–843. doi:10.1016/j.elecom.2011.05.017
210.
MaXHZhangLYangXHEffect of Ni addition on corrosion resistance of FePC bulk glassy alloy. Corros Eng Sci Technol. 2015;50:433–437. doi:10.1179/1743278214Y.0000000242
211.
SouzaCACDe OliveiraMFMayJECorrosion resistance of amorphous and nanocrystalline Fe–M–B (M=Zr, Nb) alloys. J Non Cryst Solids. 2000;273:282–288. doi:10.1016/S0022-3093(00)00174-5
212.
SouzaCACMayJEBolfariniLInfluence of composition and partial crystallization on corrosion resistance of amorphous Fe–M–B–Cu (M=Zr, Nb, Mo) alloys. J Non Cryst Solids. 2001;284:99–104. doi:10.1016/S0022-3093(01)00386-6
213.
HabazakiHKawashimaAAsamiKThe effect of tungsten on the corrosion behavior of amorphous Fe–Cr–W–P–C alloys in 1M HCl. J Electrochem Soc. 1991;138:1033–1036.
214.
AngeliniEAntonioneCBariccoMCorrosion behaviour of Fe80-xCoxB10Si10 metallic glasses in sulphate and chloride media. Mater Corros. 1993;44:98–106. doi:10.1002/maco.19930440307
215.
LiYJiaXZhangWEffects of alloying elements on the thermal stability and corrosion resistance of an Fe-based metallic glass with low glass transition temperature. Metall Mater Trans A Phys Metall Mater Sci. 2014;45:2393–2398. doi:10.1007/s11661-013-2071-6
216.
JayarajJKimYCKimKBCorrosion behaviors of Fe45-xCr18Mo14C15B6Y2Mx (M=Al, Co, Ni, N and x=0, 2) bulk metallic glasses under conditions simulating fuel cell environment. J Alloys Compd. 2007;434–435:237–239. doi:10.1016/j.jallcom.2006.08.288
217.
AlvarezMGVazquezSMMoyaJAnodic behaviour of Fe73.5Si13.5-xAlxB9Nb3Cu1 (X ⴝ 0–2) amorphous, nanostructured and crystalline alloys. Scr Mater. 2001;44:507–512. doi:10.1016/b978-0-12-053620-7.50010-x
218.
FangHHuiXChenG.Effects of Mn addition on the magnetic property and corrosion resistance of bulk amorphous steels. J Alloys Compd. 2008;464:292–295. doi:10.1016/j.jallcom.2007.09.139
219.
GostinFSiegelUMickelCCorrosion behavior of the bulk glassy (Fe44.3Cr5Co5Mo12.8Mn11.2 C15.8B5.9)98.5Y1.5 alloy. J Mater Res. 2009;24:1471–1479. doi:10.1557/jmr.2009.0169
220.
FanHBZhengWWangGYCorrosion behavior of Fe41Co7Cr15Mo14C15B6Y2 bulk metallic glass in sulfuric acid solutions. Metall Mater Trans A Phys Metall Mater Sci. 2011;42:1524–1533. doi:10.1007/s11661-010-0500-3
221.
WangZMMaYTZhangJInfluence of yttrium as a minority alloying element on the corrosion behavior in Fe-based bulk metallic glasses. Electrochim Acta. 2008;54:261–269. doi:10.1016/j.electacta.2008.08.017
222.
LópezMFEscuderoMLVidaECorrosion behaviour of amorphous Fe–Cr–Ni–(Si,P) alloys. Electrochim Acta. 1997;42:659–665. doi:10.1016/S0013-4686(96)00211-3
223.
NakaMHashimotoKMasumotoT.Effect of metalloidal elements on corrosion resistance of amorphous iron-chromium alloys. J Non Cryst Solids. 1978;28:403–413. doi:10.1016/0022-3093(78)90090-X
224.
JayarajJKimKBAhnHSCorrosion mechanism of N-containing Fe–Cr–Mo–Y–C–B bulk amorphous alloys in highly concentrated HCl solution. Mater Sci Eng A. 2007;449–451:517–520. doi:10.1016/j.msea.2006.02.418
225.
ShanlinWShanbenCSeonghoonYEffects of sulphide on pit corrosion in metallic glass steel. Mater Res Innov. 2014;18:S2638–S2641. doi:10.1179/1432891714Z.000000000475
226.
VirtanenSElsenerBBohniH.Effect of metalloids on passivity of amorphous Fe–Cr alloys. J Less Common Met. 1988;145:581–593
227.
GostinPFOswaldSSchultzLAcid corrosion process of Fe-based bulk metallic glass. Corros Sci. 2012;62:112–121. doi:10.1016/j.corsci.2012.05.004
228.
Jargelius-PetterssonRFA.Electrochemical investigation of the influence of nitrogen alloying on pitting corrosion of austenitic stainless steels. Corros Sci. 1999;41:1639–1664. doi:10.1016/S0010-938X(99)00013-X
229.
TianWPYangHWDeZS.Synergistic effect of Mo, W, Mn and Cr on the passivation behavior of a Fe-based amorphous alloy coating. Acta Metall Sin (English Lett). 2018;31:308–320. doi:10.1007/s40195-017-0604-5
230.
ZhengSLiJZhangJEffect of Si addition on the electrochemical corrosion and passivation behavior of Fe–Cr–Mo–C–B–Ni–P metallic glasses. J Non Cryst Solids. 2018;493:33–40. doi:10.1016/j.jnoncrysol.2018.04.036
231.
ZhouZWangLWangFCFormation and corrosion behavior of Fe-based amorphous metallic coatings by HVOF thermal spraying. Surf Coatings Technol. 2009;204:563–570. doi:10.1016/j.surfcoat.2009.08.025
232.
ZhangSDZhangWLWangSGCharacterisation of three-dimensional porosity in an Fe-based amorphous coating and its correlation with corrosion behaviour. Corros Sci. 2015;93:211–221. doi:10.1016/j.corsci.2015.01.022
233.
ZhangSDWuJQiWBEffect of porosity defects on the long-term corrosion behaviour of Fe-based amorphous alloy coated mild steel. Corros Sci. 2016;110:57–70. doi:10.1016/j.corsci.2016.04.021
234.
SuegamaPHFugivaraCSBenedettiAVElectrochemical behavior of thermally sprayed stainless steel coatings in 3.4% NaCl solution. Corros Sci. 2005;47:605–620. doi:10.1016/j.corsci.2004.07.003
235.
WangAPZhangTWangJQ.Ni-based fully amorphous metallic coating with high corrosion resistance. Philos Mag Lett. 2006;86:5–11. doi:10.1080/09500830500479718
236.
AhmedNBakareMSMcCartneyDGThe effects of microstructural features on the performance gap in corrosion resistance between bulk and HVOF sprayed Inconel 625. Surf Coatings Technol. 2010;204:2294–2301. doi:10.1016/j.surfcoat.2009.12.028
237.
KogaGYNogueiraRPRocheVCorrosion properties of Fe–Cr–Nb–B amorphous alloys and coatings. Surf Coatings Technol. 2014;254:238–243. doi:10.1016/j.surfcoat.2014.06.022
238.
CelisJPRoosJRFanC.Porosity of electrolytic nickel-phosphorus coatings. Trans Inst Met Finish. 1991;69:15–19. doi:10.1080/00202967.1991.11870885
239.
NotterIMGabeDR.Porosity of electrodeposited coatings: its cause, nature, effect and management. Corros Rev. 1992;10:217–280.
240.
WuJZhangSDSunWHInfluence of oxidation related structural defects on localized corrosion in HVAF-sprayed Fe-based metallic coatings. Surf Coatings Technol. 2018;335:205–218. doi:10.1016/j.surfcoat.2017.12.038
241.
GuilemanyJMFernándezJEspallargasNInfluence of spraying parameters on the electrochemical behaviour of HVOF thermally sprayed stainless steel coatings in 3.4% NaCl. Surf Coatings Technol. 2006;200:3064–3072. doi:10.1016/j.surfcoat.2005.02.116
242.
KimJKangKYoonSOxidation and crystallization mechanisms in plasma-sprayed Cu-based bulk metallic glass coatings. Acta Mater. 2010;58:952–962. doi:10.1016/j.actamat.2009.10.011
243.
WangYLiKYSceniniFThe effect of residual stress on the electrochemical corrosion behavior of Fe-based amorphous coatings in chloride-containing solutions. Surf Coatings Technol. 2016;302:27–38. doi:10.1016/j.surfcoat.2016.05.034
244.
TotemeierTCWrightRNSwankWD.Residual stresses in high-velocity oxy-fuel metallic coatings. Metall Mater Trans A Phys Metall Mater Sci A. 2004;35:1807–1814. doi:10.1007/s11661-004-0089-5
245.
ClyneTWGillSC.Residual stresses in thermal spray coatings and their effect on interfacial adhesion: a review of recent work. J Therm Spray Technol. 1996;5:401–418. doi:10.1007/BF02645271
246.
YangYZhangCPengYEffects of crystallization on the corrosion resistance of Fe-based amorphous coatings. Corros Sci. 2012;59:10–19. doi:10.1016/j.corsci.2012.02.003
247.
ZhengZBZhengYGSunWHEffect of heat treatment on the structure, cavitation erosion and erosion-corrosion behavior of Fe-based amorphous coatings. Tribol Int. 2015;90:393–403. doi:10.1016/j.triboint.2015.04.039
248.
HuangFKangJJYueWEffect of heat treatment on erosion–corrosion of Fe-based amorphous alloy coating under slurry impingement. J Alloys Compd. 2020;820:153132. doi:10.1016/j.jallcom.2019.153132
249.
LiHXYiS.Corrosion behaviors of bulk metallic glasses Fe66.7C7.0Si3.3BB5.5P8.7Cr2.3Al2.0Mo4.5 having different crystal volume fractions. Mater Chem Phys. 2008;112:305–309. doi:10.1016/j.matchemphys.2008.05.061
250.
ZohdiHBozorgMArabi JeshvaghaniRCorrosion performance and metal ion release of amorphous and nanocrystalline Fe-based alloys under simulated body fluid conditions. Mater Lett. 2013;94:193–196. doi:10.1016/j.matlet.2012.12.051
251.
WuYFChiangWCWuJK.Effect of crystallization on corrosion behavior of Fe40Ni38B18Mo4 amorphous alloy in 3.5% sodium chloride solution. Mater Lett. 2008;62:1554–1556. doi:10.1016/j.matlet.2007.09.047
252.
GostinPFGebertASchultzL.Comparison of the corrosion of bulk amorphous steel with conventional steel. Corros Sci. 2010;52:273–281. doi:10.1016/j.corsci.2009.09.016
253.
HaHMMillerJRPayerJH.Devitrification of Fe-based amorphous metal SAM 1651 and the effect of heat-treatment on corrosion behavior. J Electrochem Soc. 2009;156:C246. doi:10.1149/1.3148325
254.
DuarteMJKostkaAJimenezJACrystallization, phase evolution and corrosion of Fe-based metallic glasses: an atomic-scale structural and chemical characterization study. Acta Mater. 2014;71:20–30. doi:10.1016/j.actamat.2014.02.027
255.
CoimbrãoDDZeponGKogaGYCorrosion properties of amorphous, partially, and fully crystallized Fe68Cr8Mo4Nb4B16 alloy. J Alloys Compd. 2020;826. doi:10.1016/j.jallcom.2020.154123
256.
KogaGYFerreiraTGuoYChallenges in optimizing the resistance to corrosion and wear of amorphous Fe–Cr–Nb–B alloy containing crystalline phases. J Non Cryst Solids. 2021;555:120537. doi:10.1016/j.jnoncrysol.2020.120537
257.
MarzoFFPiernaARVegaMM.Effect of irreversible structural relaxation on the electrochemical behavior of Fe78-xSi13B9Cr(x=3,4,7) amorphous alloys. J Non Cryst Solids. 2003;329:108–114. doi:10.1016/j.jnoncrysol.2003.08.022
258.
PardoAOteroEMerinoMCInfluence of Cr addition on the corrosion resistance and magnetic properties of amorphous Fe73.5Si13.5B9Nb3Cu1 in simulated industrial environments. J Non Cryst Solids. 2001;287:421–427. doi:10.1016/S0022-3093(01)00636-6
259.
SouzaCACMayJECarlosIAInfluence of the corrosion on the saturation magnetic density of amorphous and nanocrystalline Fe73Nb3Si15:5B7: 5Cu1 and Fe80Zr3:5Nb3:5B12Cu1 alloys. J Non Cryst Solids. 2002;304:210–216. doi:10.1016/S0924-4247(03)00135-3
260.
GavrilovićARafailovićLDArtnerWThe corrosion behavior of amorphous and nanocrystalline Fe73.5Cu1Nb3Si15.5B7 alloy. Corros Sci. 2011;53:2400–2405. doi:10.1016/j.corsci.2011.03.023
261.
MayJENascentePAPKuriSE.Corrosion processes and their influence on the magnetic flux density of FeNbCuSiB alloys. Corros Sci. 2006;48:1721–1732. doi:10.1016/j.corsci.2005.05.024
262.
SzewieczekDBaronA.Electrochemical corrosion and its influence on magnetic properties of Fe75.5Si13.5 B9Nb3Cu1 alloy. J Mater Process Technol. 2005;164-165:940–946. doi:10.1016/j.jmatprotec.2005.02.084
263.
HaHMPayerJH.Devitrification of Fe-based amorphous metal SAM 1651: a structural and compositional study. Metall Mater Trans A Phys Metall Mater Sci. 2009;40:2519–2529. doi:10.1007/s11661-009-9977-z
264.
GanZZhangCZhangZRCrystallization-dependent transition of corrosion resistance of an Fe-based bulk metallic glass under hydrostatic pressures. Corros Sci. 2021;179:109098. doi:10.1016/j.corsci.2020.109098
265.
ChengJBLiangXBXuBS.Effects of crystallization on the corrosion resistance of arc-sprayed FeBSiNb coatings. J Therm Spray Technol. 2014;23:373–379. doi:10.1007/s11666-013-9990-z
266.
KangYChenYWenYEffects of structural relaxation and crystallization on the corrosion resistance of an Fe-based amorphous coating. J Non Cryst Solids. 2020;550. doi:10.1016/j.jnoncrysol.2020.120378
267.
LiangDLiuXZhouYEffects of annealing below glass transition temperature on the wettability and corrosion performance of Fe-based amorphous coatings. Acta Metall Sin (English Lett). 2021. doi:10.1007/s40195-021-01228-y
268.
WangYJiangSLZhengYGEffect of processing parameters on the microstructures and corrosion behaviour of high-velocity oxy-fuel (HVOF) sprayed Fe-based amorphous metallic coatings. Mater Corros. 2013;64:801–810. doi:10.1002/maco.201106426
269.
ZhangHHuYHouGThe effect of high-velocity oxy-fuel spraying parameters on microstructure, corrosion and wear resistance of Fe-based metallic glass coatings. J Non Cryst Solids. 2014;406:37–44. doi:10.1016/j.jnoncrysol.2014.09.041
270.
CuiSZhaiHLiWMicrostructure and corrosion resistance of Fe-based amorphous coating prepared by detonation spray. Surf Coatings Technol. 2020;399:126096. doi:10.1016/j.surfcoat.2020.126096
271.
QinYWuYZhangJOptimization of the HOVF spray parameters by Taguchi method for high corrosion-resistant Fe-based coatings. J Mater Eng Perform. 2015;24:2637–2644. doi:10.1007/s11665-015-1536-8
272.
QiaoLWuYHongSInfluence of the high-velocity oxygen-fuel spray parameters on the porosity and corrosion resistance of iron-based amorphous coatings. Surf Coatings Technol. 2019;366:296–302. doi:10.1016/j.surfcoat.2019.03.046
273.
WuNCChenKSunWHCorrelation between particle size and porosity of Fe-based amorphous coating. Surf Eng. 2019;35:37–45. doi:10.1080/02670844.2018.1447782
274.
VigneshSShanmugamKBalasubramanianVIdentifying the optimal HVOF spray parameters to attain minimum porosity and maximum hardness in iron based amorphous metallic coatings. Def Technol. 2017;13:101–110. doi:10.1016/j.dt.2017.03.001
275.
KairetTDegrezMCampanaFInfluence of the powder size distribution on the microstructure of cold-sprayed copper coatings studied by x-ray diffraction. J Therm Spray Technol. 2007;16:610–618. doi:10.1007/s11666-007-9116-6
276.
ZhangCGuoRQYangYInfluence of the size of spraying powders on the microstructure and corrosion resistance of Fe-based amorphous coating. Electrochim Acta. 2011;56:6380–6388. doi:10.1016/j.electacta.2011.05.020
277.
QiaoLWuYHongSCorrosion behavior of HVOF-sprayed Fe-based alloy coating in various solutions. J Mater Eng Perform. 2017;26:3813–3820. doi:10.1007/s11665-017-2590-1
278.
PourbaixM.Atlas of electrochemical equilibria in aqueous solutions. Houston (TX): National Association of Corrosion Engineers; 1974.
279.
Petre Flaviu Gostin von, Bukarest in, Schultz L, Eckert J. Corrosion behaviour of advanced Fe-based bulk metallic glasses n.d.
280.
TraversoPCanepaE.A review of studies on corrosion of metals and alloys in deep-sea environment. Ocean Eng. 2014;87:10–15. doi:10.1016/j.oceaneng.2014.05.003
281.
ZhangCZhangZWChenQEffect of hydrostatic pressure on the corrosion behavior of HVOF-sprayed Fe-based amorphous coating. J Alloys Compd. 2018;758:108–115. doi:10.1016/j.jallcom.2018.05.100
282.
HabibK.Stress corrosion cracking of Fe–Co–B–Si metallic glasses in HCl solutions. Scr Metall Mater. 1994;31:1669–1672.
283.
WangYLiMYSunLLEnvironmentally assisted fracture behavior of Fe-based amorphous coatings in chloride-containing solutions. J Alloys Compd. 2018;738:37–48. doi:10.1016/j.jallcom.2017.12.150
284.
TangXXuLYChengYF.Electrochemical corrosion behavior of X-65 steel in the simulated oil-sand slurry. II: synergism of erosion and corrosion. Corros Sci. 2008;50:1469–1474. doi:10.1016/j.corsci.2008.01.019
285.
WangYZhengYGKeWSlurry erosion-corrosion behaviour of high-velocity oxy-fuel (HVOF) sprayed Fe-based amorphous metallic coatings for marine pump in sand-containing NaCl solutions. Corros Sci. 2011;53:3177–3185. doi:10.1016/j.corsci.2011.05.062
286.
ZhengZBZhengYGSunWHErosion-corrosion of HVOF-sprayed Fe-based amorphous metallic coating under impingement by a sand-containing NaCl solution. Corros Sci. 2013;76:337–347. doi:10.1016/j.corsci.2013.07.006
287.
ZhengZBZhengYGZhouXDetermination of the critical flow velocities for erosion-corrosion of passive materials under impingement by NaCl solution containing sand. Corros Sci. 2014;88:187–196. doi:10.1016/j.corsci.2014.07.043
288.
ZhengZBZhengYGSunWHEffect of applied potential on passivation and erosion-corrosion of a Fe-based amorphous metallic coating under slurry impingement. Corros Sci. 2014;82:115–124. doi:10.1016/j.corsci.2014.01.004
289.
BursteinGTSasakiK.The birth of corrosion pits as stimulated by slurry erosion. Corros Sci. 2000;42:841–860. doi:10.1016/S0010-938X(99)00100-6
290.
SasakiKBursteinGT.Erosion-corrosion of stainless steel under impingement by a fluid jet. Corros Sci. 2007;49:92–102. doi:10.1016/j.corsci.2006.05.012
291.
WangYJiangSLZhengYGElectrochemical behaviour of Fe-based metallic glasses in acidic and neutral solutions. Corros Sci. 2012;63:159–173. doi:10.1016/j.corsci.2012.05.025
292.
WangYLiMYZhuFPitting corrosion mechanism of Cl−- and S2−-induced by oxide inclusions in Fe-based amorphous metallic coatings. Surf Coatings Technol. 2020;385; doi:10.1016/j.surfcoat.2020.125449
293.
WangSLLiHXJeongYUEffects of electrolyte pH on the electrochemical behavior of Fe-based bulk metallic glass. Met Mater Int. 2012;18:791–797. doi:10.1007/s12540-012-5007-6
294.
LuWWangDWangQSensitivity of corrosion behavior for fe-based amorphous coating to temperature and chloride concentration. Coatings. 2021;11:1–14. doi:10.3390/coatings11030331
295.
WangDBWuJWangQTemperature-dependent corrosion behaviour of the amorphous steel in simulated wet storage environment of spent nuclear fuels. Corros Sci. 2021;188. doi:10.1016/j.corsci.2021.109529
296.
UsmanBJSceniniFCurioniM.The effect of exposure conditions on performance evaluation of post-treated anodic oxides on an aerospace aluminium alloy: comparison between salt spray and immersion testing. Surf Coatings Technol. 2020;399:126157. doi:10.1016/J.SURFCOAT.2020.126157
297.
ZhangBDongQBaZElectrochemical corrosion behavior of plasma-sprayed FeCrNiMoCBSi amorphous/nanocrystalline coatings in simulated seawater medium. J Mater Eng Perform. 2018;27:6227–6236. doi:10.1007/s11665-018-3661-7
298.
QinYJWuYPZhangJFLong-term corrosion behavior of HVOF sprayed FeCrSiBMn amorphous/nanocrystalline coating. Trans Nonferrous Met Soc China (English Ed). 2015;25:1144–1150. doi:10.1016/S1003-6326(15)63709-8
299.
WangMZhouZWangQLong term semiconducting and passive film properties of a novel dense FeCrMoCBY amorphous coating by atmospheric plasma spraying. Appl Surf Sci. 2019;495:143600. doi:10.1016/j.apsusc.2019.143600
300.
BijalwanPSinghCKumarACorrosion behaviour of plasma sprayed Fe based metallic glass (Fe73Cr2Si11B11C3 (at%) coatings in 3.5% NaCl solution. J Non Cryst Solids. 2021;567:120913. doi:10.1016/j.jnoncrysol.2021.120913
301.
BlinkJFarmerJChoiJApplications in the nuclear industry for thermal spray amorphous metal and ceramic coatings. Metall Mater Trans A Phys Metall Mater Sci. 2009;40:1344–1354. doi:10.1007/s11661-009-9830-4
302.
KongWLiKHuJ.Immersion corrosion behavior, electrochemical performance and corrosion mechanism of subsonic flame sprayed FeCoCrMoSi amorphous coating in 3.5% NaCl solution. Int J Hydrogen Energy. 2022;47:6911–6923. doi:10.1016/J.IJHYDENE.2021.12.039
303.
Fernández-DomeneRMBlasco-TamaritEGarcía-GarcíaDMPassive and transpassive behaviour of alloy 31 in a heavy brine LiBr solution. Electrochim Acta. 2013;95:1–11. doi:10.1016/j.electacta.2013.02.024
304.
McCaffertyE.Thermodynamics of corrosion: Pourbaix diagrams. In: McCaffertyE, editor. Introduction to corrosion science. New York, NY: Springer; 2010. p. 95–117.
305.
BursteinGTSazouD.Passivity and localized corrosion. Ref Modul Mater Sci Mater Eng. 2016. doi:10.1016/B978-0-12-803581-8.01589-7
306.
HeuslerKEHuertaD.Kinetics and mechanisms of the anodic dissolution of metallic glasses. J Electrochem Soc. 1989;136:65. doi:10.1149/1.2096615
307.
ZhangLMZhangSDMaALThermally induced structure evolution on the corrosion behavior of Al–Ni–Y amorphous alloys. Corros Sci. 2018;144:172–183. doi:10.1016/J.CORSCI.2018.08.046
308.
OlssonCOALandoltD.Passive films on stainless steels – chemistry, structure and growth. Electrochim Acta. 2003;48:1093–1104. doi:10.1016/S0013-4686(02)00841-1
KlemmJKlemmSODuarteMJMulti-element-resolved electrochemical corrosion analysis. Part I. Dissolution behavior and passivity of amorphous Fe50Cr15Mo14C15B6. Corros Sci. 2014;89:59–68. doi:10.1016/j.corsci.2014.08.002
311.
ChattorajIBaunackSStoicaMElectrochemical response of Fe65.5Cr4Mo4Ga4P12 C5B5.5 bulk amorphous alloy in different aqueous media. Mater Corros. 2004;55:36–42. doi:10.1002/maco.200303693
312.
MacDonaldDD.The history of the point defect model for the passive state: a brief review of film growth aspects. Electrochim Acta. 2011;56:1761–1772. doi:10.1016/j.electacta.2010.11.005
313.
WangWAlfantaziA.An electrochemical impedance spectroscopy and polarization study of the role of crystallographic orientation on electrochemical behavior of niobium. Electrochim Acta. 2014;131:79–88. doi:10.1016/j.electacta.2013.12.085
314.
PoddarCNingshenSJayarajJ.Corrosion assessment of Ni60Nb30Ta10 metallic glass and its partially crystallized alloy in concentrated nitric acid environment. J Alloys Compd. 2020;813:152172. doi:10.1016/j.jallcom.2019.152172
315.
Fattah-alhosseiniAGolozarMASaatchiAEffect of solution concentration on semiconducting properties of passive films formed on austenitic stainless steels. Corros Sci. 2010;52:205–209. doi:10.1016/j.corsci.2009.09.003
316.
TangJYuLQiaoJEffect of atomic mobility on the electrochemical properties of a Zr58Nb3Cu16Ni13Al10 bulk metallic glass. Electrochim Acta. 2018;267:222–233. doi:10.1016/j.electacta.2018.02.071
317.
Taveira LVMontemorMFDa Cunha BeloMInfluence of incorporated Mo and Nb on the Mott-Schottky behaviour of anodic films formed on AISI 304L. Corros Sci. 2010;52:2813–2818. doi:10.1016/j.corsci.2010.04.021
318.
ZhangBWangJWuBUnmasking chloride attack on the passive film of metals. Nat Commun. 2018;9:1–9. doi:10.1038/s41467-018-04942-x
319.
SteinbergerRDuchoslavJArndtMX-ray photoelectron spectroscopy of the effects of Ar+ ion sputtering on the nature of some standard compounds of Zn, Cr, and Fe. Corros Sci. 2014;82:154–164. doi:10.1016/j.corsci.2014.01.018
320.
KernerZPajkossyT.On the origin of capacitance dispersion of rough electrodes. Electrochim Acta. 2000;46:207–211. doi:10.1016/S0013-4686(00)00574-0
321.
WangMZhouZWangQRole of passive film in dominating the electrochemical corrosion behavior of FeCrMoCBY amorphous coating. J Alloys Compd. 2019;811:151962. doi:10.1016/j.jallcom.2019.151962
322.
HuangJWuXHanEH.Electrochemical properties and growth mechanism of passive films on alloy 690 in high-temperature alkaline environments. Corros Sci. 2010;52:3444–3452. doi:10.1016/j.corsci.2010.06.016
323.
GuoSFPanFSZhangHJFe-based amorphous coating for corrosion protection of magnesium alloy. Mater Des. 2016;108:624–631. doi:10.1016/j.matdes.2016.07.031
324.
ShanXHaHPayerJH.Comparison of crevice corrosion of Fe-based amorphous metal and crystalline Ni-Cr-Mo alloy. Metall Mater Trans A Phys Metall Mater Sci. 2009;40:1324–1333. doi:10.1007/s11661-008-9697-9
325.
SzewieczekDBaronA.Electrochemical corrosion properties of amorphous Fe78Si 13B9 alloy. J Mater Process Technol. 2004;157–158:442–445. doi:10.1016/j.jmatprotec.2004.09.069
326.
WangMZhouZWangQBox–Behnken design to enhance the corrosion resistance of plasma sprayed Fe-based amorphous coating. Results Phys. 2019;15:102708. doi:10.1016/j.rinp.2019.102708
327.
BursteinGTLiuCSoutoRMOrigins of pitting corrosion. Corros Eng Sci Technol. 2004;39:25–30. doi:10.1179/147842204225016859
328.
WangZMZhangJWangJQ.Pit growth in a Ni–Nb metallic glass compared with its crystalline counterpart. Intermetallics. 2010;18:2077–2082. doi:10.1016/j.intermet.2010.06.010
329.
BakareMSVoiseyKTChokethawaiKCorrosion behaviour of crystalline and amorphous forms of the glass forming alloy Fe43Cr16Mo16C15B10. J Alloys Compd. 2012;527:210–218. doi:10.1016/j.jallcom.2012.02.127
330.
ZhangCChanKCWuYPitting initiation in Fe-based amorphous coatings. Acta Mater. 2012;60:4152–4159. doi:10.1016/j.actamat.2012.04.005
SathirachindaNPetterssonRPanJ.Depletion effects at phase boundaries in 2205 duplex stainless steel characterized with SKPFM and TEM/EDS. Corros Sci. 2009;51:1850–1860. doi:10.1016/j.corsci.2009.05.012
333.
MaachiBPirriCMehdaouiAAtomic force microscopy, scanning Kelvin probe force microscopy and magnetic measurements on thermally oxidized AISI 304 and AISI 316 stainless steels. Corros Sci. 2011;53:984–991. doi:10.1016/j.corsci.2010.11.031
334.
PuncktCBölscherMRotermundHHSudden onset of pitting corrosion on stainless steel as a critical phenomenon. Science (80-). 2004;305:1133–1136. doi:10.1126/science.1101358
335.
MikhailovASScullyJRHudsonJL.Nonequilibrium collective phenomena in the onset of pitting corrosion. Surf Sci. 2009;603:1912–1921. doi:10.1016/j.susc.2008.08.045
336.
WuJZhangSDSunWHEnhanced corrosion resistance in Fe-based amorphous coatings through eliminating Cr-depleted zones. Corros Sci. 2018;136:161–173. doi:10.1016/j.corsci.2018.03.005
337.
WuJCuiJPZhengQJInsight into the corrosion evolution of Fe-based amorphous coatings under wet-dry cyclic conditions. Electrochim Acta. 2019;319:966–980. doi:10.1016/j.electacta.2019.07.058
338.
DeshpandeSSampathSZhangH.Mechanisms of oxidation and its role in microstructural evolution of metallic thermal spray coatings – case study for Ni–Al. Surf Coatings Technol. 2006;200:5395–5406. doi:10.1016/j.surfcoat.2005.07.072
339.
ChoiHLeeSKimBEffect of in-flight particle oxidation on the phase evolution of HVOF NiTiZrSiSn bulk amorphous coating. J Mater Sci. 2005;40:6121–6126. doi:10.1007/s10853-005-3169-z
WangWZhangCXuPEnhancement of oxidation and wear resistance of Fe-based amorphous coatings by surface modification of feedstock powders. Mater Des. 2015;73:35–41. doi:10.1016/j.matdes.2015.02.015
342.
JiangCLuJLiuWCorrosion resistance of plasma-sprayed Fe-based coatings by using core-shell structure powders. J Mater Res Technol. 2020;9:12273–12280. doi:10.1016/j.jmrt.2020.08.081
343.
SadeghimereshtEMarkocsanNNylénP.Microstructural characteristics and corrosion behavior of HVAF- and HVOF-sprayed Fe-based coatings. Surf Coatings Technol. 2017;318:365–373. doi:10.1016/j.surfcoat.2016.11.088
344.
ZhangXWangZLinJA study on high temperature oxidation behavior of high-velocity arc sprayed Fe-based coatings. Surf Coatings Technol. 2015;283:255–261. doi:10.1016/j.surfcoat.2015.10.067
345.
CuiCYeFSongG.Laser surface remelting of Fe-based alloy coatings deposited by HVOF. Surf Coatings Technol. 2012;206:2388–2395. doi:10.1016/j.surfcoat.2011.10.038
346.
ZhangYGaoXLiangXEffect of laser remelting on the microstructure and corrosion property of the arc-sprayed AlFeNbNi coatings. Surf Coatings Technol. 2020;398:126099. doi:10.1016/j.surfcoat.2020.126099
347.
JiangCWangJHanJEffect of laser remelting on the microstructure and corrosion resistance of plasma sprayed Fe-based coating. J Wuhan Univ Technol Mater Sci Ed. 2015;30:804–807. doi:10.1007/s11595-015-1231-5
348.
ZhangXLJiangCPZhangFYThe evaluation of microstructure characteristic and corrosion performance of laser-re-melted fe-based amorphous coating deposited via plasma spraying. Mater Express. 2019;9:1100–1105. doi:10.1166/mex.2019.1598
349.
HanCMaLSuiXInfluence of low energy density laser Re-melting on the properties of cold sprayed FeCoCrMoBCY amorphous alloy coatings. Coatings. 2021;11:695. doi:10.3390/coatings11060695
350.
KnuuttilaJSorsaPMäntyläT.Sealing of thermal spray coatings by impregnation. J Therm Spray Technol. 1999;8:249–257. doi:10.1007/s11666-999-0002-2
351.
WangYJiangSLZhengYGEffect of porosity sealing treatments on the corrosion resistance of high-velocity oxy-fuel (HVOF)-sprayed Fe-based amorphous metallic coatings. Surf Coatings Technol. 2011;206:1307–1318. doi:10.1016/j.surfcoat.2011.08.045
352.
LiuMMHuHXZhengYG.Effects of three sealing methods of aluminum phosphate sealant on corrosion resistance of the Fe-based amorphous coating. Surf Coatings Technol. 2017;309:579–589. doi:10.1016/j.surfcoat.2016.12.033
353.
LiuMMHuHXZhengYGEffect of sol-gel sealing treatment loaded with different cerium salts on the corrosion resistance of Fe-based amorphous coating. Surf Coatings Technol. 2019;367:311–326. doi:10.1016/j.surfcoat.2019.04.011
354.
JiaoJLuoQWeiXInfluence of sealing treatment on the corrosion resistance of Fe-based amorphous coatings in HCl solution. J Alloys Compd. 2017;714:356–362. doi:10.1016/j.jallcom.2017.04.179
355.
LiLFCelisJP.Pickling of austenitic stainless steels (a review). Can Metall Q. 2003;42:365–376. doi:10.1179/cmq.2003.42.3.365
356.
LuGAdaETZangariG.Investigations of the effect of chromate conversion coatings on the corrosion resistance of Ni-based alloys. Electrochim Acta. 2004;49:1461–1473. doi:10.1016/j.electacta.2003.10.032
357.
LiCWangHDingJEffects of heat treatment on HVOF-sprayed Fe-based amorphous coatings. Surf Eng. 2021;37:590–598. doi:10.1080/02670844.2020.1759936.
358.
ZhangCWuYLiuL.Robust hydrophobic Fe-based amorphous coating by thermal spraying. Appl Phys Lett. 2012;101:1–5. doi:10.1063/1.4754140
359.
WangYWuCMLiWEffect of bionic hydrophobic structures on the corrosion performance of Fe-based amorphous metallic coatings. Surf Coatings Technol. 2021;416. doi:10.1016/j.surfcoat.2021.127176
360.
ZhangCZhouHLiuL.Laminar Fe-based amorphous composite coatings with enhanced bonding strength and impact resistance. Acta Mater. 2014;72:239–251. doi:10.1016/j.actamat.2014.03.047
361.
PengYZhangCZhouHOn the bonding strength in thermally sprayed Fe-based amorphous coatings. Surf Coat Technol. 2013;218:17–22. doi:10.1016/j.surfcoat.2012.12.018
362.
TerajimaTTakeuchiFNakataKComposite coating containing WC/12Co cermet and Fe-based metallic glass deposited by high-velocity oxygen fuel spraying. J Alloys Compd. 2010;504:S288–S291. doi:10.1016/j.jallcom.2010.03.209
363.
ZhouHZhangCWangWMicrostructure and mechanical properties of Fe-based amorphous composite coatings reinforced by stainless steel powders. J Mater Sci Technol. 2015;31:43–47. doi:10.1016/j.jmst.2014.09.008
364.
YasirMZhangCWangWEnhancement of impact resistance of Fe-based amorphous coating by Al2O3 dispersion. Mater Lett. 2016;171:112–116. doi:10.1016/j.matlet.2016.02.060
365.
WangWZhangCZhangZWToughening Fe-based amorphous coatings by reinforcement of amorphous carbon. Sci Rep. 2017;7:4084. doi:10.1038/s41598-017-04504-z
366.
GuoSFLiuLLiNFe-based bulk metallic glass matrix composite with large plasticity. Scr Mater. 2010;62:329–332. doi:10.1016/j.scriptamat.2009.10.024
367.
ChengJBLiangXBChenYXHigh-temperature erosion resistance of FeBSiNb amorphous coatings deposited by arc spraying for boiler applications. J Therm Spray Technol. 2013;22:820–827. doi:10.1007/s11666-012-9876-5
368.
ChuZWeiFZhengXMicrostructure and properties of TiN/Fe-based amorphous composite coatings fabricated by reactive plasma spraying. J Alloys Compd. 2019;785:206–213. doi:10.1016/j.jallcom.2019.01.171
369.
YasirMZhangCWangWWear behaviors of Fe-based amorphous composite coatings reinforced by Al2O3 particles in air and in NaCl solution. Mater Des. 2015;88:207–213. doi:10.1016/j.matdes.2015.08.142
370.
YasirMZhangCWangWTribocorrosion behavior of Fe-based amorphous composite coating reinforced by Al2O3 in 3.5% NaCl solution. J Therm Spray Technol. 2016;25:1554–1560. doi:10.1007/s11666-016-0457-x
371.
XuLSongJZhangXMicrostructure and corrosion resistance of WC-based cermet/Fe-based amorphous alloy composite coatings. Coatings. 2018;8. doi:10.3390/COATINGS8110393
372.
CuiCHouW.Properties of Fe-based amorphous alloy coatings with Al2O3-13% TiO2 deposited by plasma spraying. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Met Mater Eng. 2014;43:2576–2579. doi:10.1016/s1875-5372(15)60004-2
373.
XuPZhangCWangWPitting mechanism in a stainless steel-reinforced Fe-based amorphous coating. Electrochim Acta. 2016;206:61–69. doi:10.1016/j.electacta.2016.04.130
374.
WangSLLiHXHwangSYCorrosion behaviors of coatings fabricated using bulk metallic glass powders with the composition of Fe68.5C7.1Si3.3B5.5P8.7Cr2.3Mo2.5Al2.0. Met Mater Int. 2012;18:607–612. doi:10.1007/s12540-012-4006-y
375.
IqbalASiddiqueSMaqsoodMComparative analysis on the structure and properties of iron-based amorphous coating sprayed with the thermal spraying techniques. Coatings. 2020;10:1–12. doi:10.3390/coatings10101006
376.
ChengJZhangQFengYMicrostructure and sliding wear behaviors of plasma-sprayed Fe-based amorphous coatings in 3.5 wt.% NaCl solution. J Therm Spray Technol. 2019;28:1049–1059. doi:10.1007/s11666-019-00866-0
377.
LinJRWangZHLinPHEffect of crystallisation on electrochemical properties of arc sprayed FeNiCrBSiNbW coatings. Surf Eng. 2014;30:683–687. doi:10.1179/1743294414Y.0000000299
378.
LiuSZhuYLaiXInfluence of different heat treatment temperatures on the microstructure, corrosion, and mechanical properties behavior of Fe-based amorphous/nanocrystalline coatings. Coatings. 2019;9. doi:10.3390/coatings9120858
379.
ZhouZWangLHeDYMicrostructure and electrochemical behavior of Fe-based amorphous metallic coatings fabricated by atmospheric plasma spraying. J Therm Spray Technol. 2011;20:344–350. doi:10.1007/s11666-010-9570-4
380.
RaiPKNaiduDSatapathyBAmorphous/nanocrystalline composite coatings using blast furnace pig iron composition by atmospheric plasma spray and their electrochemical response. J Therm Spray Technol. 2020;29:843–856. doi:10.1007/s11666-020-00995-x
381.
ZhangHGongYZhangBCorrosion and algal adhesion behaviors of HVOF-sprayed Fe-based amorphous coatings for marine applications. J Therm Spray Technol. 2019;28:283–290. doi:10.1007/s11666-018-0774-3
382.
KogaGYJorge JuniorAMRocheVProduction and corrosion resistance of thermally sprayed Fe-based amorphous coatings from mechanically milled feedstock powders. Metall Mater Trans A Phys Metall Mater Sci. 2018;49:4860–4870. doi:10.1007/s11661-018-4785-y
383.
LiuWHShieuFSHsiaoWT.Enhancement of wear and corrosion resistance of iron-based hard coatings deposited by high-velocity oxygen fuel (HVOF) thermal spraying. Surf Coatings Technol. 2014;249:24–41. doi:10.1016/j.surfcoat.2014.03.041
384.
LinJWangZLinPMicrostructure and corrosion resistance of Fe-based coatings prepared by twin wires arc spraying process. J Therm Spray Technol. 2014;23:333–339. doi:10.1007/s11666-013-0017-6
385.
ZhangJDengCSongJElectrochemical corrosive behaviors of Fe-based amorphous/nanocrystalline coating on stainless steel prepared by HVOF-sprayed. Coatings. 2019;9:1–15. doi:10.3390/coatings9040254
386.
SarkarKRaiPKKumar KatiyarPComposite (glass + crystalline) coatings from blast furnace pig iron by high velocity oxy-fuel (HVOF) process and their electrochemical behavior. Surf Coatings Technol. 2019;372:72–83. doi:10.1016/j.surfcoat.2019.05.025
387.
MahataNBanerjeeABijalwanPElectrochemical behavior of HVOF-sprayed amorphous and nanocrystalline Fe-based Fe73.13Si11.12B10.79Cr2.24C2.72 composite coatings. J Mater Eng Perform. 2017;26:5538–5552. doi:10.1007/s11665-017-2997-8
388.
BijalwanPKumarANayakSKMicrostructure and corrosion behavior of Fe-based amorphous composite coatings developed by atmospheric plasma spraying. J Alloys Compd. 2019;796:47–54. doi:10.1016/j.jallcom.2019.05.046
389.
NayakSKKumarASarkarK Corrosion behavior of Fe-based amorphous / nanocrystalline composite coating : correlating the influence of porosity and amorphicity n.d.:2.
390.
KumarANayakSKPathakAInvestigation of nanomechanical deformation behavior in plasma sprayed Fe-based amorphous/ nanocrystalline composite coating via multi-scale indentation and nanotribology. J Non Cryst Solids. 2020;545:120244. doi:10.1016/j.jnoncrysol.2020.120244
391.
KumarANayakSKLahaT.Comparative study on wear and corrosion behavior of plasma sprayed Fe73Cr2Si11B11C3 and Fe63Cr9P5B16C7 metallic glass composite coatings. J Therm Spray Technol. 2022:1–15. doi:10.1007/S11666-021-01280-1/FIGURES/12
392.
NayakSKKumarASarkarKMechanistic insight into the role of amorphicity and porosity on determining the corrosion mitigation behavior of Fe-based amorphous/nanocrystalline coating. J Alloys Compd. 2020;849:156624. doi:10.1016/j.jallcom.2020.156624
393.
KumarANayakSKBanerjeeAMulti-scale indentation creep behavior in Fe-based amorphous/nanocrystalline coating at room temperature. Mater Lett. 2021;283:128768. doi:10.1016/j.matlet.2020.128768
394.
KumarANayakSKBijalwanPOptimization of mechanical and corrosion properties of plasma sprayed low-chromium containing Fe-based amorphous/nanocrystalline composite coating. Surf Coatings Technol. 2019;370:255–268. doi:10.1016/j.surfcoat.2019.05.010
395.
NayakSKKumarALahaT.Developing an economical wear and corrosion resistant Fe-based metallic glass composite coating by plasma and HVOF spraying. J Therm Spray Technol. 2021. doi:10.1007/s11666-021-01277-w
396.
NayakSKKumarAPathakAMulti-scale mechanical properties of Fe-based amorphous/nanocrystalline composite coating synthesized by HVOF spraying. J Alloys Compd. 2020;825:154120. doi:10.1016/j.jallcom.2020.154120
397.
KumarANayakSKBijalwanPMechanical and corrosion properties of plasma-sprayed Fe-based amorphous/nanocrystalline composite coating. Adv Mater Process Technol. 2019;5:371–377. doi:10.1080/2374068X.2019.1598129
398.
InoueATakeuchiA.Recent development and application products of bulk glassy alloys. Acta Mater. 2011;59:2243–2267. doi:10.1016/j.actamat.2010.11.027
399.
2006 HK-T 2 nd. ATSC, 2006 undefined. Microstructure and wear behavior of Fe-based metallic glass sprayed coatings by HVOF on aluminum alloy. CiNiiAcJp, n.d.
400.
ShmyrevaT. Proceeding JK-MDM. 2004. Undefined. Nano-amorphous coatings for medical instruments. BooksGoogleCom n.d.
401.
LiHFZhengYF.Recent advances in bulk metallic glasses for biomedical applications. Acta Biomater. 2016;36:1–20. doi:10.1016/j.actbio.2016.03.047
402.
LiSWeiQLiQDevelopment of Fe-based bulk metallic glasses as potential biomaterials. Mater Sci Eng C. 2015;52:235–241. doi:10.1016/j.msec.2015.03.041
403.
WangYBLiHFZhengYFCorrosion performances in simulated body fluids and cytotoxicity evaluation of Fe-based bulk metallic glasses. Mater Sci Eng C. 2012;32:599–606. doi:10.1016/j.msec.2011.12.018
404.
ZhangLMYanMCZhangSDSignificantly enhanced resistance to SRB corrosion via Fe-based amorphous coating designed with high dose corrosion-resistant and antibacterial elements. Corros Sci. 2020;164:108305. doi:10.1016/J.CORSCI.2019.108305
