In the last two decades, fibre-reinforced SiC ceramic-matrix composites (CMCs) have attracted extensive interests. Owing to the designable multi-scale microstructure feature and the tailorable processing methods such as chemical vapour infiltration and polymer derived ceramics, SiC matrix composites attain great potential as multifunctional composites. Through designing the fibre, interphase, matrix and coating, the composite exhibits a multitude of functionalities which are desirable for various technological applications. Besides strengthening and toughening design of CMCs, three inspiring issues of multifunctional CMCs are receiving increasing attention, including crack self-healing, friction self-lubrication, and electromagnetic shielding and absorption, which are the key mechanisms to promote the application of CMCs in hot structures of engines and aerospace vehicles, braking pads/discs, various electronic devices, etc. The present review covers the main mechanisms on strengthening and toughening, crack self-healing, friction self-lubrication, and electromagnetic shielding and absorption of CMCs. Key developments and future challenges in this field are summarised.
Get full access to this article
View all access options for this article.
References
1.
RitchieR. O.: ‘The conflicts between strength and toughness’, Nat. Mater., 2011, 10, 817–822.
2.
ŘehořekL.ChlupZ.MengD.YunosD. M.BoccacciniA. R.DlouhýI.: ‘Response of 45S5 Bioglass® foams to tensile loading’, Ceram. Int., 2013, 39, 8015–8020.
3.
GreilP.VogliE.FeyT.BezoldA.PopovskN.GerhardH.SieberH.: ‘Effect of microstructure on the fracture behavior of biomorphous silicon carbide ceramics’, J. Eur. Ceram. Soc., 2002, 22, 2697–2707.
4.
ZhangR.ChengX.FangD.KeL.WangY.: ‘Ultra-high-temperature tensile properties and fracture behavior of ZrB2-based ceramics in air above 1500 °C’, Mater. Des., 2013, 52, 17–22.
5.
BiesheuvelP. M.VerweijH.: ‘Design of ceramic membrane supports: permeability tensile strength and stress’, J. Membr. Sci., 1999, 156, 141–152.
6.
LeonC. A.DrewR. A. L.: ‘Small punch testing for assessing the tensile strength of gradient Al/Ni-SiC composites’, Mater. Lett., 2002, 56, 812–816.
7.
ZhangP.JiaD.YangZ.DuanX.ZhouY.: ‘Microstructural features and properties of the nano-crystalline SiC/BN(C) composite ceramic prepared from the mechanically alloyed SiBCN powder’, J. Alloys Compd., 2012, 537, 346–356.
8.
GaoH. Q.FeiW. D.: ‘Interfacial reaction and tensile properties of 6061Al matrix composite reinforced with copper-coated Al18B4O33 whiskers’, Mater. Lett., 2005, 59, 3756–3760.
9.
LiuG.TangS. W.HuJ.: ‘Effects of sintering temperature of whisker preform on the microstructures and tensile properties of Bi(OH)3-coated Al18B4O33 whisker-reinforced aluminum matrix composites’, Mater. Sci. Eng. A, 2011, 528, 5184–5189.
10.
NajiH.ZebarjadS. M.SajjadiS. A.: ‘The effects of volume percent and aspect ratio of carbon fiber on fracture toughness of reinforced aluminum matrix composites’, Mater. Sci. Eng. A, 2008, 486, 413–420.
11.
DongC.DaviesI. J.: ‘Flexural and tensile strengths of unidirectional hybrid epoxy composites reinforced by S-2 glass and T700S carbon fibres’, Mater. Des., 2014, 54, 955–966.
12.
LeeW. J.ChenH. L.ChenH. T.HsiehJ. Y.LinJ. S.JuS. P.LinK. H.LinK. F.: ‘Mechanical and structural properties of helical and non-helical silica nanowire’, Compos. Mater. Sci., 2014, 82, 165–171.
13.
LiH.SunF. W.LiewK. M.LiuX. F.: ‘Stretching behavior of a carbon nanowire encapsulated in a carbon nanotube’, Scr. Mater., 2009, 60, 129–132.
14.
PengB.LocascioM.ZapolP.LiS.MielkeS. L.SchatzG. C.EspinosaH. D.: ‘Measurements of near-ultimate strength for multiwalled carbon nanotubes and irradiation-induced crosslinking improvements’, Nat. Nanotechnol., 2008, 3, 626–631.
15.
WangM. S.GolbergD.BandoY.: ‘Tensile tests on individual single-walled carbon nanotubes: linking nanotube strength with its defects’, Adv. Mater., 2010, 22, 4071–4075.
16.
ZhuY.MuraliS.CaiW.LiX.SukJ. W.PottsJ. R.RuoffR. S.: ‘Graphene and graphene oxide: synthesis, properties, and applications’, Adv. Mater., 2010, 22, 3906–3924.
17.
LiY.ZhouM.: ‘Prediction of fracture toughness of ceramic composites as function of microstructure: I. Numerical simulations’, J. Mech. Phys. Solids, 2013, 61, 472–488.
18.
WuJ. M.ZhangX. Y.YangJ. L.: ‘Novel porous Si3N4 ceramics prepared by aqueous gelcasting using Si3N4 poly-hollow microspheres as pore-forming agent’, J. Eur. Ceram. Soc., 2014, 34, 1089–1096.
19.
LongL. H.ChenL. D.BaiS. Q.ChangJ.LinK. L.: ‘Preparation of dense β-CaSiO3 ceramic with high mechanical strength and HAp formation ability in simulated body fluid’, J. Eur. Ceram. Soc., 2006, 26, 1701–1706.
20.
WangW.LianJ.RuH.: ‘Pressureless sintered SiC matrix toughened by in situ synthesized TiB2: Process conditions and fracture toughness’, Ceram. Int., 2012, 38, 2079–2085.
21.
RajanK.SajgalikP.: ‘Microstructurally induced internal stresses in β-Si3N4 whisker-reinforced Si3N4 ceramics’, J. Eur. Ceram. Soc., 1997, 17, 1093–1097.
22.
WangC.HuangY.ZhaiH.: ‘The effect of whisker orientation in SiC whisker-reinforced Si3N4 ceramic matrix composites’, J. Eur. Ceram. Soc., 1999, 19, 1903–1909.
JacobG. C.StarbuckJ. M.FellersJ. F.SimunovicS.BoemanR. G.: ‘Fracture toughness in random-chopped fiber-reinforced composites and their strain rate dependence’, J. Appl.Polym Sci., 2006, 100, 695–701.
25.
ZhangX.XuL.HanW.WengL.HanJ.DuS.: ‘Microstructure and properties of silicon carbide whisker reinforced zirconium diboride ultra-high temperature ceramics’, Solid State Sci., 2009, 11, 156–161.
26.
BaoY. W.LiuC. C.HuangJ. L.: ‘Effects of residual stresses on strength and toughness of particle-reinforced TiN/Si3N4 composite: theoretical investigation and FEM simulation’, Mater. Sci. Eng. A, 2006, 434, 250–258.
27.
KimB. C.ParkS. W.LeeD. G.: ‘Fracture toughness of the nano-particle reinforced epoxy composite’, Compos. Struct., 2008, 86, 69–77.
28.
YangF. Y.ZhangX. H.HanJ. C.DuS. Y.: ‘Characterization of hot-pressed short carbon fiber reinforced ZrB2-SiC ultra-high temperature ceramic composites’, J. Alloys. Compd., 2009, 472, 395–399.
29.
XuY. D.ChengL. F.ZhangL. T.YinH. F.YinX. W.: ‘High toughness, 3D textile, SiC/SiC composites by chemical vapor infiltration’, Mater. Sci. Eng. A, 2001, 318, 183–188.
30.
GotoK.KagawaY.: ‘Fracture behaviour and toughness of a plane-woven SiC fibre-reinforced SiC matrix composite’, Mater. Sci. Eng. A, 1996, 211, 72–81.
31.
PadtureN. P.: ‘Multifunctional composites of ceramics and single-walled carbon nanotubes’, Adv. Mater., 2009, 21, 1767–1770.
32.
SneadL. L.NozawaT.KatohY.ByunT. S.KondoS.PettiD. A.: ‘Handbook of SiC properties for fuel performance modeling’, J. Nucl. Mater., 2007, 371, 329–377.
33.
YuehK.CarpenterD.FeinrothH.: ‘Clad in clay’, Nucl. Eng. Int., 2010, 55, 14–16.
34.
TerraniK. A.PintB. A.ParishC. M.SilvaC. M.SneadL. L.KatohY.: ‘Silicon carbide oxidation in steam up to 2 MPa’, J. Am. Ceram. Soc., 2014, 97, 2331–2352.
35.
KimH. G.YangJ. H.KimW. J.KooY. H.: ‘Development status of accident-tolerant fuel for light water reactors in Korea’, Nucl. Eng. Technol., 2016, 48, 1–15.
36.
IvekovićA.NovakS.DražićG.BlagoevaD.Gonzalez de VicenteS.: ‘Current status and prospects of SiCf/SiC for fusion structural applications’, J. Eur. Ceram. Soc., 2013, 33, 1577–1589.
37.
RossoM.: ‘Ceramic and metal matrix composites: Routes and properties’, J. Mater. Process. Technol., 2006, 175, 364–375.
38.
WeißR.: ‘Carbon/Carbons and their industrial applications’, in ‘Ceramic matrix composites: fiber reinforced ceramics and their applications’, (ed. KrenkelW.), 69–111; 2008, Weinheim,Germany, Wiley-VCH Verlag GmbH & Co. KGaA.
OgbujiLinus U.J.T.: ‘Pest-resistance in SiC/BN/SiC composites’, J. Eur. Ceram. Soc., 2003, 23, 613–617.
41.
OgasawaraT.AokiT.HassanM. S. A.MizokamiY.WatanabeN.: ‘Ablation behavior of SiC fiber/carbon matrix composites under simulated atmospheric reentry conditions’, Compos. Part A: Appl. Sci. Manuf., 2011, 42, 221–228.
42.
ParlierM.RittiM. H.: ‘State of the art and perspectives for oxide/oxide composites’, Aerosp. Sci. Technol., 2003, 7, 211–221.
43.
NaslainR.: ‘Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview’, Compos. Sci. Technol., 2004, 64, 155–170.
44.
JimenezO.BagheriH.McClainJ.RidlerK.BornemiszaT.: ‘CSGT: Final design and test of a ceramic hot section// ASME Turbo Expo 2003’, collocated with the 2003 International Joint Power Generation Conference. Am. Soc. Mech. Eng., 2003:685–692.
45.
ZokF. W.: ‘Developments in oxide fiber composites’, J. Am. Ceram. Soc., 2006, 89, 3309–3324.
46.
RobinsonR. C.SmialekJ. L.: ‘SiC Recession caused by SiO2 scale volatility under combustion conditions: I. Experimental results and empirical model’, J. Am. Ceram. Soc., 1999, 82, 1817–1825.
47.
OpilaE. J.SmialekJ. L.RobinsonR. C.FoxD. S.JacobsonN. S.: ‘SiC recession caused by SiO2 scale volatility under combustion conditions: II. Thermodynamics and gaseous diffusion model’, J. Am. Ceram. Soc., 1999, 82, 1826–1834.
48.
JacobsonN. S.OpilaE. J.LeeK. N.: ‘Oxidation and corrosion of ceramics and ceramic matrix composites’, Curr. Opin. Solid State Mater. Sci., 2001, 5, 301–309.
49.
ArmaniC. J.Ruggles-WrennM. B.FairG. E.HayR. S.: ‘Creep of Nextel™ 610 fiber at 1100 °C in air and in steam’, Int. J. Appl. Ceram. Technol., 2013, 10, 276–284.
50.
ArmaniC. J.Ruggles-WrennM. B.HayR. S.FairG. E.: ‘Creep and microstructure of Nextel™ 720 fiber at elevated temperature in air and steam’, Acta Mater., 2013, 61, 6114–6124.
51.
SudreO.RazellA.MolliexL.HolmquistM.: ‘Alumina single-crystal reinforced alumina matrix for combustor tiles’, 22nd Annual Cocoa Beach Conference and Exposition on Advanced Ceramics, Materials and Structures, Cocoa Beach (FL), 1998, 20–24.
52.
SchmuckerM.MechnichP.: ‘All-oxide ceramic matrix composites with porous matrices’, in ‘Ceramic matrix composites: fiber reinforced ceramics and their applications’, (ed. KrenkelW.), 205–229; 2008, Weinheim,Germany, Wiley-VCH Verlag GmbH & Co. KGaA.
53.
CarelliE. A. V.FujitaH.YangJ. Y.ZokF. W.: ‘Effects of thermal aging on the mechanical properties of a porous-matrix ceramic composite’, J. Am. Ceram. Soc., 2002, 85, 595–602.
54.
MotzG.SchmidtS.BeyerS.: ‘The PIP-process: precursor properties and applications’, in ‘Ceramic matrix composites: fiber reinforced ceramics and their applications’, (ed. KrenkelW.), 165–186; 2008, Weinheim,Germany, Wiley-VCH Verlag GmbH & Co. KGaA.
55.
LawrenceP.: ‘Some theoretical considerations of fibre pull-out from an elastic matrix’, J. Mater. Sci., 1972, 7, 1–6.
56.
TakakuA.ArridgeR.: ‘The effect of interfacial radial and shear stress on fibre pull-out in composite materials’, J. Phys. D: Appl. Phys., 1973, 6, 2038–2047.
57.
GaoY.MaiY.CotterellB.: ‘Fracture of fiber-reinforced materials’, J. Appl. Math. Phys., 1988, 39, 550–572.
58.
StangH.ShahS.: ‘Failure of fibre-reinforced composites by pullout fracture’, J. Mater. Sci., 1986, 21, 953–957.
59.
HeM. Y.HutchinsonJ. W.: ‘Crack deflection at an interface between dissimilar elastic materials’, Int. J. Solids Struct., 1989, 25, 1053–1067.
60.
EvansA. G.ZokF. W.: ‘The physics and mechanics of fibre-reinforced brittle matrix composites’, J. Mater. Sci., 1994, 29, 3857–3896.
61.
PompidouS.LamonJ.: ‘Analysis of crack deviation in ceramic matrix composites and multilayers based on the Cook and Gordon mechanism’, Compos. Sci. Technol., 2007, 67, 2052–2060.
62.
KeransR. J.HayR. S.ParthasarathyT. A.CinibulkM. K.: ‘Interface design for oxidation-resistant ceramic composites’, J. Am. Ceram. Soc., 2002, 85, 2599–2632.
63.
NaslainR. R.PaillerR. J. F.LamonJ. L.: ‘Single- and multilayered interphases in SiC/SiC composites exposed to severe environmental conditions: an overview’, Int. J. Appl. Ceram. Technol., 2010, 7, 263–275.
64.
CoonsT. P.ReutenauerJ. W.MercadoA.KmetzM. A.SuibS. L.: ‘The characterization of an oxide interfacial coating for ceramic matrix composites’, Mater. Sci. Eng. A, 2013, 573, 190–196.
65.
LeeW. Y.Lara-CurzioE.MoreK. L.: ‘Multilayered oxide interphase concept for ceramic-matrix composites’, J. Am. Ceram. Soc., 1998, 81, 717–720.
66.
DavisJ. B.MarshallD. B.MorganP. E. D.: ‘Monazite-containing oxide/oxide composites’, J. Eur. Ceram. Soc., 2000, 20, 583–587.
67.
ChawlaK. K.XuZ. R.HaJ. S.: ‘Processing, structure, and properties of mullite fiber/mullite matrix composites’, J. Eur. Ceram. Soc., 1996, 16, 293–299.
68.
PlucknettK. P.CainR. L.LewisM. H.: ‘Interface degradation in CAS/Nicalon during elevated temperature aging’, MRS Proc., 1994, 365, 421.
69.
WangY.LiuH. T.ChengH. F.WangJ.: ‘Effective fugitive carbon coatings for the strength improvement of 3D Nextel™ 440/aluminosilicate composites’, Mater. Lett., 2014, 126, 236–239.
70.
WangY.LiuH. T.ChengH. F.: ‘Interface engineering of fiber-reinforced all-oxide composites fabricated by the sol-gel method with fugitive pyrolytic carbon coatings’, Compos. Part B: Eng., 2015, 75, 86–94.
71.
VolkmannE.EvangelistaL. L.TushtevK.KochD.WilhelmiC.RezwanK.: ‘Oxidation-induced microstructural changes of a polymer-derived NextelTM 610 ceramic composite and impact on the mechanical Performance’, J. Mater. Sci., 2014, 49, 710–719.
72.
SimonR. A.: ‘Progress in processing and performance of porous-matrix oxide/oxide composites’, Int. J. Appl. Ceram. Technol., 2015, 2, 141–149.
73.
PentyR. A.HasselmanD. P. H.SpriggsR. M.: ‘Young's modulus of high-density polycrystalline mullite’, J. Am. Ceram. Soc., 1972, 55, 169–170.
74.
AtisivanR.BoseS.BandyopadhyayA.: ‘Porous mullite preforms via fused deposition’, J. Am. Ceram. Soc., 2001, 84, 221–223.
75.
SpriggsR. M.: ‘Expression for effect of porosity on elastic modulus of polycrystalline refractory materials, particularly aluminum oxide’, J. Am. Ceram. Soc., 1961, 44, 628–629.
MeiH.ChengL. F.: ‘Comparison of the mechanical hysteresis of carbon/ceramic-matrix composites with different fiber performs’, Carbon, 2009, 47, 1034–1042.
BuckleyJ. D.EdieD. D.: ‘Carbon–carbon materials and composites’; 1993, Norwich,NY,UK, William Andrew.
80.
WangY.ZhangL.ChengL.: ‘Comparison of tensile behaviors of carbon/ceramic composites with various fiber architectures’, J. Appl. Ceram. Technol., 2013, 10, 266–275.
MouritzA. P.: ‘Fracture and tensile fatigue properties of stitched fibre glass composites’, J. Mater. Des. Appl., 2004, 218, 87–93.
83.
DexterH. B.FunkJ. G.: ‘Impact resistance and interlaminar fracture toughness of through-the-thickness reinforced graphite/epoxy-27th Structural Dynamics and Materials Conference (San Antonio, TX), AIAA Paper 86-1020, 700–709 (American Institute of Aeronautics and Astronautics, New York, 1986).
84.
VeeduV. P.CaoA.LiX.MaK.SoldanoC.KarS.AjayanP. M.Ghasemi-NejhadM. N.: ‘Multifunctional composites using reinforced laminae with carbon-nanotube forests’, Nat. Mater., 2006, 5, 457–462.
85.
ColomboP.MeraG.RiedelR.DomenicoG.: ‘Polymer-derived ceramics: 40 years of research and innovation in advanced ceramics’, J. Am. Ceram. Soc., 2010, 93, 1805–1837.
86.
LazzeriA.: ‘CVI processing of ceramic matrix composites’, in ‘Ceramics and composites processing methods’, 1st edn., (ed. BansalN. P.BoccacciniA. R.), 313–349; 2012, USA, John Wiley & Sons, Inc.
87.
GoleckiI.: ‘Recent advances in rapid densification of thick, refractory composites by inductively heated thermal gradient, flowing gas, isobaric, chemical vapor infiltration’, in ‘Proceedings of the 14th International Conference of Euro CVD-11’, (eds. AllendorfM. D.BernardC.), 568–575; 1997, Paris, France, Electrochemical Society Proceedings.
GreilP.: ‘Generic principles of crack-healing ceramics’, J. Adv. Ceram., 2012, 1, 249–267.
90.
GuillaumatL.LamonJ.: ‘Probabilistic-statistical simulation of the non-linear mechanical behavior of a woven SiC/SiC composite’, Compos. Sci. Technol., 1996, 56, 803–808.
91.
LamonJ.: ‘A micromechanics-based approach to the mechanical behavior of brittle-matrix composites’, Compos. Sci. Technol., 2001, 61, 2259–2272.
92.
GenetM.MarcinL.BarangerE.CluzelC.LadevezeP.MouretA.: ‘Computational prediction of the lifetime of self-healing CMC structures’, Compos. Part A: Appl. Sci. Manufact., 2012, 43, 294–303.
93.
LamourouxF.CamusG.ThébaultJ.: ‘Kinetics and mechanisms of oxidation of 2D woven C/SiC composites: I experimental approach’, J. Am. Ceram. Soc., 1994, 77, 2049–2057.
94.
ChengL. F.XuY. D.ZhangL. T.LuanX. G.: ‘Oxidation and defect control of CVD SiC coating on three-dimensional C/SiC composites’, Carbon, 2002, 40, 2229–2234.
95.
ZhangC. Y.ZhaoM. M.LiuY. S.WangB.WangX. W.QiaoS. R.: ‘Tensile strength degradation of a 2.5D-C/SiC composite under thermal cycles in air’, J. Eur. Ceram. Soc., 2016, 36, 3011–3019.
96.
FungC. D.KopanskiJ. J.: ‘Thermal oxidation of 3C silicon, carbide single-crystal layers on silicon’, Appl. Phys. Lett., 1984, 45, 757–759.
97.
ChengL. F.XuY. D.ZhangL. T.YinX. W.: ‘Effect of carbon interlayer on oxidation behavior of C/SiC composites with a coating from room temperature to 1500 °C’, Mater. Sci. Eng. A, 2001, 300, 219–225.
98.
FengT.LiH. J.FuQ. G.WuH.ShenX. T.: ‘Influence of Cr content on the microstructure and anti-oxidation property of MoSi2-CrSi2-Si multi-composition coating for SiC coated carbon/carbon composites’, J. Alloys Compd., 2010, 501, L20–L24.
99.
YaoX. Y.LiH. J.ZhangY. L.RenJ. J.YaoD. J.TaoJ.: ‘A SiC/ZrB2-SiC/SiC oxidation resistance multilayer coating for carbon/carbon composites’, Corros. Sci., 2012, 57, 148–153.
JacobsonN. S.RothD. J.RauserR. W.CawleyJ. D.CurryD. M.: ‘Oxidation through coating cracks of SiC-protected carbon/carbon’, Surf. Coat. Technol., 2008, 203, 372–383.
102.
ChlupZ.FlasarP.KotojiA.DlouhyI.: ‘Fracture behaviour of Al2O3/SiC nanocomposite ceramics after crack healing treatment’, J. Eur. Ceram. Soc., 2008, 28, 1073–1077.
103.
LamourouxF.BertrandS.PaillerR.NaslainR.: ‘A multilayer ceramic matrix for oxidation resistant carbon fibers-reinforced CMCs’, Key Eng. Mater., 1999, 164–165, 365–368.
104.
MagnantJ.MailléL.PaillerR.IchardJ. C.GuetteA.RebillatF.PhilippeE.: ‘Carbon fiber/reaction-bonded carbide matrix for composite materials: manufacture and characterization’, J. Eur. Ceram. Soc., 2012, 32, 4497–4505.
105.
SogabeT.MatsudaT.KurodaK.HirohataY.HinoT.YamashinaT.: ‘Preparation of B4C-mixed graphite by pressureless sintering and its air oxidation behavior’, Carbon, 1995, 33, 1783–1788.
106.
GuoQ.SongJ.LiuL.ZhangB.: ‘Relationship between oxidation resistance and structure of B4C-SiC/C composites with self-healing properties’, Carbon, 1999, 37, 33–40.
107.
EhrburgerP.BaranneP.LahayeJ.: ‘Inhibition of the oxidation of carbon/carbon composite by boron oxide’, Carbon, 1986, 24, 495–499.
108.
LiuY. S.ZhangL. T.ChengL. F.YangW. B.ZhangW. H.XuY. D.: ‘Preparation and oxidation protection of CVD SiC/a-BC/SiC coatings for 3D C/SiC composites’, Corros. Sci., 2009, 51, 820–826.
109.
FerrarisM.MontorsiM.SalvoM.: ‘Glass coating for SiCf/SiC composites for high-temperature application’, Acta Mater., 2000, 48, 4721–4724.
FengT.LiH. J.ShiX. H.YangX.LiY. X.YaoX. Y.: ‘Sealing role of B2O3 in MoSi2-CrSi2-Si/B-modified coating for C/C composites’, Corros. Sci., 2012, 60, 4–9.
112.
WestwoodM. E.WesterJ. D.DayR. J.HayesF. H.TaylorR.: ‘Oxidation protection for carbon fibre composites’, J. Mater. Sci., 1996, 31, 1389–1397.
113.
LabruquereS.BlanchardH.PaillerR.NaslainR.: ‘Enhancement of the oxidation resistance of interfacial area in C/C composites. Part I: oxidation resistance of B-C, Si-B-C and Si-C coated carbon fibres’, J. Eur. Ceram. Soc., 2002, 22, 1001–1009.
114.
LabruquereS.BlanchardH.PaillerR.NaslainR.: ‘Enhancement of the oxidation resistance of interfacial area in C/C composites. Part II: oxidation resistance of B-C, Si-B-C and Si-C coated carbon preforms densified with carbon’, J. Eur. Ceram. Soc., 2002, 22, 1011–1021.
115.
FengT.LiH. J.YangX.ShiX. H.WangS.HeZ. B.: ‘Multilayer and multi-component oxidation protective coating system for carbon/carbon composites from room temperature to 1873K’, Corros. Sci., 2013, 72, 144–149.
116.
ZuoX.ZhangL.LiuY.ChengL.XiaY.: ‘Oxidation behaviour of two-dimensional C/SiC modified with self-healing Si-B-C coating in static air’, Corros. Sci., 2012, 65, 87–93.
117.
QuemardL.RebillatF.GuetteA.TawilH.Louchet-PouillerieC.: ‘Self-healing mechanisms of a SiC fiber reinforced multi-layered ceramic matrix composite in high pressure steam environments’, J. Eur. Ceram. Soc., 2007, 27, 2085–2094.
118.
WuB.DongS.WangZ.KanY.ZhangL.ZhouF.: ‘Properties of Cf/SiC composites modified by a boron-containing phase’, Ceram. Int., 2013, 39, 4729–4734.
119.
MatsushitaJ. I.SawadaY.: ‘Oxidation resistance of silicon tetra boride powder’, J. Ceram. Soc. Jpn., 1997, 105, 922–924.
120.
TongC. Q.ChengL. F.YinX. W.ZhangL. T.XuY. D.: ‘Oxidation behavior of 2D C/SiC composite modified by SiB4 particles in inter-bundle pores’, Compos. Sci. Technol., 2008, 68, 602–607.
121.
CaoX. Y.YinX. W.MaX. K.FanX. M.ChengL. F.ZhangL. T.: ‘Oxidation behavior of SiBC matrix modified C/SiC composites with different PyC interphase thicknesses’, Ceram. Int., 2015, 41, 1695–1700.
122.
ShiF. M.YinX. W.FanX. M.ChengL. F.ZhangL. T.: ‘A new route to fabricate SiB4 modified C/SiC composites’, J. Eur. Ceram. Soc., 2010, 30, 1955–1962.
123.
CaoX. Y.YinX. W.FanX. M.ChengL. F.ZhangL. T.: ‘Effect of PyC interphase thickness on mechanical behaviors of SiBC matrix modified C/SiC composites fabricated by reactive melt infiltration’, Carbon, 2014, 77, 886–895.
124.
BarsoumM. W.: ‘The MN+1AXN phases: A new class of solids thermodynamically stable nanolaminates’, Prog. Solid State Chem., 2000, 28, 201–281.
125.
ZhouY. C.SunZ. M.WangX. H.ChenS. Q.: ‘Ab initio geometry optimization and ground state properties of layered ternary carbides Ti3MC2 (M = Al, Si and Ge)’, J. Phys. Condens. Matter, 2001, 13, 10001–10010.
SunZ. M.: ‘Progress in research and development on MAX phases: a family of layered ternary compounds’, Int. Mater. Rev., 2011, 56, 143–166.
128.
LiS.SongG.KwakernaakK.ZwaagS.: ‘Multiple crack healing of a Ti2AlC ceramic’, J. Eur. Ceram. Soc., 2012, 32, 1813–1820.
129.
YangH. J.PeiY. T.RaoJ. C.HossonJ. T. M. D.: ‘Self-healing performance of Ti2AlC ceramic’, J. Mater. Chem., 2012, 22, 8304–8313.
130.
LiS. B.LiH. L.ZhouY.ZhaiH. X.: ‘Mechanism for abnormal thermal shock behavior of Cr2AlC’, J. Eur. Ceram. Soc., 2014, 34, 1083–1088.
131.
El-RaghyT.BarsoumM. W.ZavaliangosA.KalidindiS. R.: ‘Processing and mechanical properties of Ti3SiC2: II. Effect of grain size and deformation temperature’, J. Am. Ceram. Soc., 1999, 82, 2855–2860.
ZhouY. C.ZhangH. B.LiM. S.WangJ. Y.BaoY. W.: ‘Preparation of TiC free Ti3SiC2 with improved oxidation resistance by substitution of Si with Al’, Mater. Res. Innovat., 2004, 8, 97–102.
134.
WanD. T.ZhouY. C.BaoY. W.YanC. K.: ‘In situ reaction synthesis and characterization of Ti3Si(Al)C2/SiC composites’, Ceram. Int., 2006, 32, 883–890.
135.
ZhouY. C.WanD. T.BaoY. W.WangJ. Y.: ‘In situ processing and high-temperature properties of Ti3Si(Al)C2/SiC composites’, Int. J. Appl. Ceram. Technol., 2006, 3, 47–54.
136.
SunZ.ZhouY.LiM.: ‘High temperature oxidation behavior of Ti3SiC2-based material in air’, Acta Mater., 2001, 49, 4347–4353.
137.
SarkarD.PadhiaryA.ChoS. J.ChuM. C.: ‘Oxidation-induced strength behavior of Ti3SiC2’, J. Mater. Process. Technol., 2009, 209, 641–646.
138.
ZhangJ.WangL.JiangW.ChenL.: ‘High temperature oxidation behavior and mechanism of Ti3SiC2-SiC nanocomposites in air’, Compos. Sci. Technol., 2008, 68, 1531–1538.
139.
LiuB.WangJ. Y.ZhangJ.WangJ. M.LiF. Z.ZhouY. C.: ‘Theoretical investigation of A-element atom diffusion in Ti2AC (A=Sn, Ga, Cd, In, and Pb)’, Appl. Phys. Lett., 2009, 94, 181906.
140.
LiS. B.BeiG. P.ChenX. D.ZhangL. Q.ZhouY.MačkovićM.SpieckerE.GreilP.: ‘Crack healing induced electrical and mechanical properties recovery in a Ti2SnC ceramic’, J. Eur. Ceram. Soc., 2016, 36, 25–32.
141.
SpencerC. B.CórdobaJ. M.ObandoN. H.RadovicM.OdénM.HultmanL.BarsoumM. W.: ‘The reactivity of Ti2AlC and Ti3SiC2 with SiC fibers and powders up to temperatures of 1550 °C’, J. Am. Ceram. Soc., 2011, 94, 1737–1743.
142.
ZhangJ. W.HuC. F.WangY. G.HuangQ.CuiP.: ‘Interfacial reactions between polymer derived SiC fiber and Ti3Si(Al)C2’, Key Eng. Mater., 2013, 544, 238–244.
143.
FanX. M.YinX. W.HeS. S.ZhangL. T.ChengL. F.: ‘Friction and wear behaviors of C/C-SiC composites containing Ti3SiC2’, Wear, 2012, 274, 188–195.
144.
YangJ. S.DongS. M.XuC. Y.: ‘Mechanical response and microstructure of 2D carbon fiber reinforced ceramic matrix composites with SiC and Ti3SiC2 fillers’, Ceram. Int., 2016, 42, 3019–3027.
145.
FanX. M.YinX. W.CaoX. Y.ChenL. Q.ChengL. F.ZhangL. T.: ‘Improvement of the mechanical and thermophysical properties of C/SiC composites fabricated by liquid silicon infiltration’, Compos. Sci. Technol., 2015, 115, 21–27.
146.
FanX. M.YinX. W.ChenL. Q.ZhangL. T.ChengL. F.: ‘Mechanical behavior and electromagnetic interference shielding properties of C/SiC-Ti3 Si(Al)C2’, J. Am. Ceram. Soc., 2016, 99, 1717–1724.
147.
WangL.YinX. W.FanX. W.GreilP.TravitzkyN.: ‘Ti3Si(Al)C2-based ceramics fabricated by reactive melt infiltration with Al70Si30 alloy’, J. Eur. Ceram. Soc., 2014, 34, 1493–1499.
148.
YinX. W.HeS. S.ZhangL. T.FanS. W.ChengL. F.TianG. L.LiT.: ‘Fabrication and characterization of a carbon fibre reinforced carbon-silicon carbide-titanium silicon carbide hybrid matrix composite’, Mater. Sci. Eng. A, 2010, 527, 835–841.
149.
FanX. M.YinX. W.: ‘Microstructure and properties of carbon fiber reinforced SiC matrix composites containing Ti3SiC2’, Adv. Eng. Mater., 2014, 16, 670–683.
150.
YinX. W.TravitzkyN.GreilP.: ‘Three-dimensional printing of nanolaminated Ti3AlC2 toughened TiAl3-Al2O3 composites’, J. Am. Ceram. Soc., 2007, 90, 2128–2134.
MengZ. X.: ‘Strengthening and toughening of continuous fiber reinforced silicon carbide ceramic matrix composites’, PhD thesis,Northwestern Polytechnical University, 2013, 1–98.
153.
YangW. B.: ‘The microstructure and property evolution of BxC modified 2D C/SiC composites in thermal-load oxidizing environments’, PhD thesis, Northwestern Polytechnical University,2009, 39–88.
154.
ByrneC.WangZ.: ‘Influence of thermal properties on friction performance of carbon composites’, Carbon, 2001, 39, 1789–1801.
155.
DongJ.WangZ.: ‘Effects of anti-oxidant migration on friction and wear of C/C aircraft brakes’, Appl. Compos. Mater., 2009, 16, 73–81.
156.
GodetM.: ‘The third body approach: a mechanical view of wear’, Wear, 1984, 100, 437–452.
157.
LeiB.HeL.YiM.RanL.XuH.GeY.PengK.: ‘New insights into the microstructure of the friction surface layer of C/C composites’, Carbon, 2011, 49, 4554–4562.
158.
GouiderM.BerthierY.JacquemardP.RousseauB.: ‘Mass spectrometry during C/C composite friction: carbon oxidation associated with high friction coefficient and high wear rate’, Wear, 2004, 256, 1082–1087.
159.
RietschJ. C.DentzerJ.DufourA.SchnellF.VidalL.JacquemardP.GadiouR.Vix-GuterlC.: ‘Characterizations of C/C composites and wear debris after heavy braking demands’, Carbon, 2009, 47, 85–93.
160.
XiongX.HuangB.LiJ.XuH.: ‘Friction behaviors of carbon/carbon composites with different pyrolytic carbon textures’, Carbon, 2006, 44, 463–467.
161.
LiJ.XiongX.ZhangH.XiaoP.HuangB.: ‘Study on the worn surfaces of C/C composites at various braking velocities’, Acta Mater. Compos. Sin., 2007, 24, 112–117.
162.
MoteallehA.OrtizA.L.Borrero-LópezO.GuiberteauF.: ‘Effect of hexagonal-BN additions on the sliding-wear resistance of fine-grained α-SiC densified with Y3Al5O12 liquid phase by spark-plasma sintering’, J. Eur. Ceram. Soc., 2014, 34, 565–574.
163.
ChoiH. J.BaeH. T.LeeJ. K.NaB. C.McNallanM. J.LimD. S.: ‘Sliding wear of silicon carbide modified by etching with chlorine at various temperatures’, Wear, 2009, 266, 214–219.
164.
WangY. X.WangL. P.XueQ. J.: ‘Improving the tribological performances of graphite-like carbon film on Si3N4 and SiC by using sinter layers’, Appl. Surf. Sci., 2011, 257, 10246–10253.
165.
CandelarioV. M.Borrero-LópezO.GuiberteauF.MorenoR.OrtizA. L.: ‘Sliding-wear resistance of liquid-phase-sintered SiC containing graphite nanodispersoids’, J. Eur. Ceram. Soc., 2014, 34, 2597–2602.
166.
FanS.ZhangL.ChengL.ZhangJ.YangS.LiuH.: ‘Wear mechanisms of the C/SiC brake materials’, Tribol. Int., 2011, 44, 25–28.
167.
WenS. Z.: ‘Principle of tribology’; 1990, Beijing, China, Tsinghua University Press.
168.
StachowiakG. W.: ‘Wear-materials, mechanisms and practice’; 2005, England, John Wiley & Sons Ltd.
169.
WayneS. F.BaldoniJ. G.BuljanS.-T.: ‘Abrasion and erosion of WC–Co with controlled microstructure’, Tribol. Trans., 1990, 33, 611–617.
170.
WangY.WuH.: ‘Friction surface evolution of carbon fibre reinforced carbon/silicon carbide (Cf/C-SiC) composites’, J. Eur. Ceram. Soc., 2010, 30, 3187–3201.
171.
CuiX. H.WangS. Q.WangF.ChenK. M.: ‘Research on oxidation wear mechanism of the cast steels’, Wear, 2008, 265, 468–476.
172.
NagarajS.ZhaoS.DharaniL. R.HilmasG. E.WeiJ.: ‘Effect of oxidation on wear in C/C aircraft disk brakes’, Int. Rev. Aerospace Eng., 2014, 7, 34–42.
173.
BalkoJ.HvizdosP.DuszaJ.BalázsiC.GamcováJ.: ‘Wear damage of Si3N4-graphene nanocomposites at room and elevated temperatures’, J. Eur. Ceram. Soc., 2014, 34, 3309–3317.
174.
OzcanS.FilipP.: ‘Wear of carbon fiber reinforced carbon matrix composites: Study of abrasive, oxidative wear and influence of humidity’, Carbon, 2013, 62, 240–247.
175.
BurchellT. D.StrizakJ. P.: ‘The effect of neutron irradiation on the fracture toughness of graphite’, Nucl. Eng. Des., 2014, 271, 262–269.
176.
OkuT.KurumadaA.ImamuraY.IshiharaM.: ‘Effects of ion irradiation on the hardness properties of graphites and C/C composites by indentation tests’, J. Nucl. Mater., 2008, 381, 92–97.
177.
DuanX.WangM.JiaD.JingN.WuZ.YangZ.: ‘Anisotropic mechanical properties and fracture mechanisms of textured h-BN composite ceramics’, Mater. Sci. Eng. A, 2014, 607, 38–43.
178.
LiS.XieJ.ZhaoJ.ZhangL.: ‘Mechanical properties and mechanism of damage tolerance for Ti3SiC2’, Mater. Lett., 2002, 57, 119–123.
179.
FouquetS.RollinM.PaillerR.BourratX.: ‘Tribological behaviour of composites made of carbon fibres and ceramic matrix in the Si-C system’, Wear, 2008, 264, 850–856.
180.
CumingsJ.ZettlA.: ‘Low-friction nanoscale linear bearing realized from multiwall carbon nanotubes’, Science, 2000, 289, 602–604.
181.
UmedaJ.FugetsuB.NishidaE.MiyajiH.KondohK.: ‘Friction behavior of network-structured CNT coating on pure titanium plate’, Appl. Surf. Sci., 2015, 357, 721–727.
182.
SunZ.ChengX.: ‘Investigation of carbon nanotube-containing film on silicon substrates and its tribological behavior’, Appl. Surf. Sci., 2015, 355, 272–278.
183.
ChoM.: ‘The flexural and tribological behavior of multi-walled carbon nanotube-reinforced polyphenylene sulfide composites’, Mater. Trans., 2008, 49, 2801–2807.
184.
GandhiR. A.PalanikumarK.RagunathB. K.DavimJ. P.: ‘Role of carbon nanotubes (CNTs) in improving wear properties of polypropylene (PP) in dry sliding condition’, Mater. Des., 2013, 48, 52–57.
185.
JiangJ. L.WangH. Z.YangH.XuJ. C.: ‘Fabrication and wear behavior of CNT/Al composites’, Trans. Nonferrous Met. Soc. China, 2007, 17, 113–116.
186.
BastwrosM. M. H.EsawiA. M. K.WifiA.: ‘Friction and wear behavior of Al-CNT composites’, Wear, 2013, 307, 164–173.
187.
JulianJ. G.DatyeA.WuK. H.SchneiderJ.: ‘Robust and wear resistant in-situ carbon nanotube/Si3N4 nanocomposites with a high loading of nanotubes’, Carbon, 2014, 72, 338–347.
188.
PuchyV.HvizdosP.DuszaJ.KovacF.InamF.ReeceM. J.: ‘Wear resistance of Al2O3-CNT ceramic nanocomposites at room and high temperatures’, Ceram. Int., 2013, 39, 5821–5826.
LinC. B.ChangZ. C.TungY. H.KoY. Y.: ‘Manufacturing and tribological properties of copper matrix/carbon nanotubes composites’, Wear, 2011, 270, 382–394.
193.
LimD. S.AnJ. W.LeeH. J.: ‘Effect of carbon nanotube addition on the tribological behavior of carbon/carbon composites’, Wear, 2001, 252, 512–517.
194.
GongQ. M.LiZ.BaiX. D.LiD.LiangJ.: ‘The effect of carbon nanotubes on the microstructure and morphology of pyrolytic carbon matrices of C-C composites obtained by CVI’, Compos. Sci. Technol., 2005, 65, 1112–1119.
195.
XiaoP.LuX. F.LiuY. Q.HeL. L.: ‘Effect of in situ grown carbon nanotubes on the structure and mechanical properties of unidirectional carbon/carbon composites’, Mater. Sci. Eng. A, 2011, 528, 3056–3061.
196.
SongQ.LiK. Z.LiH. L.LiH. J.RenC.: ‘Fullerene C60 as an inhibitor of high temperature lipid oxidation’, Carbon, 2012, 50, 3943–3960.
197.
YuH. Y.LuJ. H.SongQ.LiK. Z.LiH. J.FuQ. G.ZhangL.: ‘Compressive properties of carbon/carbon composites reinforced by carbon nanotubes with different orientations and lengths’, Vacuum, 2014, 99, 76–79.
198.
LiK.LiL.LiH.SongQ.LuJ.FuQ.: ‘Electrophoretic deposition of carbon nanotubes onto carbon fiber felt for production of carbon/carbon composites with improved mechanical and thermal properties’, Vacuum, 2014, 104, 105–110.
199.
LuX.XiaoP.ChenJ.LongY.: ‘Oxidation behavior of C/C composites with the fibre/matrix interface modified by carbon nanotubes grown in situ at low temperature’, Corros. Sci., 2012, 55, 20–25.
ObunaiK.OkuboK.FujiiT.: ‘Synthesization of CNTs on pore surfaces in C/C composites and effect of CNTs on tribological characteristics’, J. Soc. Mater. Sci., 2014, 63, 356–361.
202.
KovalčíkováA.BalkoJ.BalázsiC.HvizdošP.DuszaJ.: ‘Influence of h-BN content on mechanical and tribological properties of Si3N4/BN ceramic composites’, J. Eur. Ceram. Soc., 2014, 34, 3319–3328.
203.
ChenZ.LiH.FuQ.QiangX.: ‘Tribological behaviors of SiC/h-BN composite coating at elevated temperatures’, Tribol. Int., 2012, 56, 58–65.
204.
SeghiS.LeeJ.EconomyJ.: ‘High density carbon fiber/boron nitride matrix composites: fabrication of composites with exceptional wear resistance’, Carbon, 2005, 43, 2035–2043.
205.
SeghiS.FabioB.EconomyJ.: ‘Carbon/carbon-boron nitride composites with improved wear resistance compared to carbon/carbon’, Carbon, 2004, 42, 3043–3048.
206.
FanX. M.YinX. W.ChengY.ZhangL. T.ChengL. F.: ‘Microstructure and tribological behaviors of C/C-BN composites fabricated by chemical vapor infiltration’, Ceram. Int., 2012, 38, 6137–6144.
ChenZ.LiH.LiK.ShenQ.FuQ.: ‘Influence of grain size on wear behavior of SiC coating for carbon/carbon composites at elevated temperatures’, Mater. Des., 2014, 53, 412–418.
209.
TangH.ZengX.XiongX.LiL.ZouJ.: ‘Mechanical and tribological properties of short-fiber-reinforced SiC composites’, Tribol. Int., 2009, 42, 823–827.
210.
KrenkelW.: Proceedings of the ISATA Conference on Supercars, 31 October–4 November, Aachen, Germany, 1994.
ZhangY. H.XiaoZ. C.WangJ. P.XingR. P.PengZ. G.: ‘Effect of pyrocarbon content on thermal and frictional properties in C/C preforms of C/C-SiC composites’, Wear, 2010, 269, 132–138.
213.
WangY. S.StephenM. H.: ‘Wear and wear transition mechanisms of ceramics’, Wear, 1996, 195, 112–122.
214.
MurthyV. S. R.KobayashiH.TamariN.TsurekawaS.WatanabeT.KatoK.: ‘Effect of doping elements on the friction and wear properties of SiC in unlubricated sliding condition’, Wear, 2004, 257, 89–96.
CaiY. Z.FanS. W.LiuH. Y.ZhangL. T.ChengL. F.DongB. X.JiangJ.: ‘Microstructures and improved wear resistance of 3D needled C/SiC composites with graphite filler’, Compos. Sci. Technol., 2009, 69, 2447–2453.
217.
AnderssonP.BlombergA.: ‘Instability in the tribochemical wear of silicon-carbide in unlubricated sliding contacts’, Wear, 1994, 174, 1–7.
218.
TakadoumJ.ZsigaZ.RoquescarmesC.: ‘Wear mechanism of silicon-carbide — new observations’, Wear, 1994, 174, 239–242.
219.
CranmerD. C.: ‘Friction and wear properties of monolithic silicon-based ceramics’, J. Mater. Sci., 1985, 20, 2029–2037.
220.
VeraM. C.Ramirez-RicoJ.Martinez-FernandezJ.SinghM.: ‘Sliding wear resistance of biomorphic SiC ceramics’, Int. J. Refract. Met. H., 2015, 49, 327–333.
221.
DhimanR.RanaK.BenguE.MorgenP.: ‘Synthesis, characterization, and wear and friction properties of variably structured SiC/Si elements made from wood by molten Si impregnation’, J. Eur. Ceram. Soc., 2012, 32, 1105–1116.
222.
SangK.JinZ.: ‘Unlubricated wear of Si/SiC and its composite with nickel Si/SiC-Ni’, Tribol. Int., 2001, 34, 315–319.
ParkS. J.SeoM. K.LeeJ. R.: ‘Effect of oxidation inhibitor on the low energy tribological behavior of carbon-carbon composites’, Carbon, 2002, 40, 835–843.
225.
ZhuY.ZhouA.JiY.JiaJ.WangL.WuB.ZanQ.: ‘Tribological properties of Ti3SiC2 coupled with different counterfaces’, Ceram. Int., 2015, 41, 6950–6955.
226.
XuJ.YanH.GuD.: ‘Friction and wear behavior of polytetrafluoroethene composites filled with Ti3SiC2’, Mater. Des., 2014, 61, 270–274.
227.
ZhaiW.ShiX.XuZ.YaoJ.SongS.XiaoY.: ‘Effect of Ti3SiC2 content on tribological behavior of Ni3Al matrix self-lubricating composites from 25 to 800° C’, J. Mater. Eng. Perform., 2014, 23, 1374–1385.
228.
EvansA. G.MarshallD. B.: ‘Wear mechanisms in ceramics’, in ‘Fundamentals of friction and wear of materials’, (ed. RigneyD. A.), 439–452; 1981, Metals Park,OH, American Society for Materials, American Society for Metals.
229.
FischerT. E.TomizawaH.: ‘Interaction of tribochemistry and microfracture in the friction and wear of silicon nitride’, Wear, 1985, 105, 29–45.
230.
GhoshN. C.HarimkarS. P.: ‘Microstructure and wear behavior of spark plasma sintered Ti3SiC2 and Ti3SiC2-TiC composites’, Ceram. Int., 2013, 39, 4597–4607.
231.
LenzF.KrenkelW.: ‘Fabrication of fiber composites with a MAX phase matrix by reactive melt infiltration’, IOP Conf. Ser.: Mater. Sci. Eng., 2011, 18, 202030.
232.
LenzF.KrenkelW.: ‘Carbon fiber reinforced ceramics based on reactive melt infiltration processes’, J. Korean Ceram. Soc., 2012, 49, 287–294.
233.
KongL. B.LiZ. W.LiuL.HuangR.AbshinovaM.YangZ. H.TangC. B.TanP. K.DengC. R.MatitsineS.: ‘Recent progress in some composite materials and structures for specific electromagnetic applications’, Int. Mater. Rev., 2013, 58, 203–259.
234.
ChungD. D. L.: ‘Carbon materials for structural self-sensing, electromagnetic shielding and thermal interfacing’, Carbon, 2012, 50, 3342–3353.
235.
MicheliD.VricellaA.PastoreR.MarchettiM.: ‘Synthesis and electromagnetic characterization of frequency selective radar absorbing materials using carbon nanopowders’, Carbon, 2014, 77, 756–774.
236.
MicheliD.PastoreR.VricellaA.MorlesR. B.MarchettiM.DelfiniA.MoglieF.PrimianiV. M.: ‘Electromagnetic characterization and shielding effectiveness of concrete composite reinforced with carbon nanotubes in the mobile phones frequency band’, Mater. Sci. Eng. B, 2014, 188, 119–129.
237.
MicheliD.PastoreR.GradoniG.PrimianiV. M.MoglieF.MarchettiM.: ‘Reduction of satellite electromagnetic scattering by carbon nanostructured multilayers’, Acta Astronaut., 2013, 88, 61–73.
238.
CaoM. S.SongW. L.HouZ. L.WenB.YuanJ.: ‘The effects of temperature and frequency on the dielectric properties, electromagnetic interference shielding and microwave-absorption of short carbon fiber/silica composites’, Carbon, 2010, 48, 788–796.
ColemanJ. N.KhanU.BlauW. J.GunkoY. K.: ‘Small but strong: a review of the mechanical properties of carbon nanotube-polymer composites’, Carbon, 2006, 44, 1624–1652.
250.
KimI. T.TannenbaumA.TannenbaumR.: ‘Anisotropic conductivity of magnetic carbon nanotubes embedded in epoxy matrices’, Carbon, 2011, 49, 54–61.
251.
YinX. W.KongL.ZhangL. T.ChengL. F.TravitzkyN.GreilP.: ‘Electromagnetic properties of Si-C-N based ceramics and composites’, Int. Mater. Rev., 2014, 59, 326–355.
252.
WuR.ZhouK.YueC. Y.WeiJ.PanY.: ‘Recent progress in synthesis, properties and potential applications of SiC nanomaterials’, Prog. Mater. Sci., 2015, 72, 1–60.
BrosseauC.: ‘Modelling and simulation of dielectric heterostructures: a physical survey from an historical perspective’, J. Phys. D: Appl. Phys., 2006, 39, 1277–1294.
255.
QinF.BrosseauC.: ‘A review and analysis of microwave absorption in polymer composites filler with carbonaceous particles’, J. Appl. Phys., 2012, 111, 061301.
256.
ThomassinJ. M.JérômeC.PardoenT.BaillyC.HuynenI.DetrembleurC.: ‘Polymer/carbon based composites as electromagnetic interference (EMI) shielding materials’, Mater. Sci. Eng. R, 2013, 74, 211–232.
257.
LeachP. O.AlexanderM. B.: ‘Electronic systems failures and anomalies attributed to electromagnetic interference, Technical Report, NASA Report 1374, National Aeronautics and Space Administration, Washington DC, USA, 1995.
258.
AlbanoM.MicheliD.GradoniG.MorlesR. B.MarchettiM.MoglieF.PrimianiV. M.: ‘Electromagnetic shielding of thermal protection system for hypersonic vehicles’, Acta Astronaut., 2013, 87, 30–39.
259.
LiuX. F.ZhangL. T.YinX. W.YeF.LiuY. S.ChengL. F.: ‘Flexible thin SiC fiber fabrics using carbon nanotube modification for improving electromagnetic shielding properties’, Mater. Des., 2016, 104, 68–75.
DongN.ChenL. Q.YinX. W.MaX. K.SunX. N.ChengL. F.ZhangL. T.: ‘Fabrication and electromagnetic interference shielding effectiveness of Ti3Si(Al)C2 modified Al2O3/SiC composites’, Ceram. Int., 2016, 42, 9448–9454.
262.
ChenL. Q.YinX. W.FanX. M.ChenM.MaX. K.ChengL. F.ZhangL. T.: ‘Mechanical and electromagnetic shielding properties of carbon fiber reinforced silicon carbide matrix composites’, Carbon, 2015, 95, 10–19.
263.
LeiY.WangY.XueJ.SongY.: ‘Influence of pyrolysis conditions on fabrication of polymer-derived BN fiber for wave transparent application’, Compos. Part B: Eng., 2013, 51, 254–259.
264.
CaoF.FangZ.ZhangC.: ‘High-temperature properties and associated structure evolution of continuous SiNO fiber-reinforced BN composites for wave transparency’, Mater. Des., 2013, 43, 258–263.
265.
TheilmannP.YunD. J.AsbeckP.ParkS. H.: ‘Superior electromagnetic interference shielding and dielectric properties of carbon nanotube composites through the use of high aspect ratio CNTs and three-roll milling’, Org. Electron., 2013, 14, 1531–1537.
266.
DingD.ShiY.WuZ.ZhouW.LuoF.ChenJ.: ‘Electromagnetic interference shielding and dielectric properties of SiCf/SiC composites containing pyrolytic carbon interphase’, Carbon, 2013, 60, 552–555.
267.
LuoH.XiaoP.HuangL.HongW.: ‘Dielectric properties of Cf-Si3N4 sandwich composites prepared by gelcasting’, Ceram. Int., 2014, 40, 8253–8259.
268.
TianH.LiuH.ChengH.: ‘Effects of SiC contents on the dielectric properties of SiO2f/SiO2 composites fabricated through a sol-gel process’, Powder Technol., 2013, 239, 374–380.
269.
StaufferD.: ‘Introduction to percolation theory’; 1985, London, UK, Taylor & Francis.
YeF.ZhangL. T.YinX. W.LiuY.ChengL. F.: ‘Dielectric and electromagnetic wave absorbing properties of two types of SiC fibres with different compositions’, J. Mater. Sci. Technol., 2013, 29, 55–58.
275.
DingD.ZhouW.LuoF.ZhuD.: ‘Influence of pyrolytic carbon coatings on complex permittivity and microwave absorbing properties of Al2O3 fiber woven fabrics’, Trans. Nonferrous Met. Soc. China, 2012, 22, 354–359.
276.
AlfordN. M.PennS. J.: ‘Sintered alumina with low dielectric loss’, J. Appl. Phys., 1996, 80, 5895–5898.
277.
PennS. J.AlfordN. M.TempletonA.WangX. R.XuM. S.ReeceM.SchrapelK.: ‘Effect of porosity and grain size on the microwave dielectric properties of sintered alumina’, J. Am. Ceram. Soc., 1997, 87, 1885–1888.
278.
LingQ.SunJ.ZhaoQ.ZhouQ.: ‘Microwave absorbing properties of linear low density polyethylene/ethylene-octene copolymer composites filled with short carbon fiber’, Mater. Sci. Eng. B, 2009, 162, 162–166.
279.
HongM. S.ChoiW. K.AnK. H.KangS. J.ParkS. J.: ‘Electromagnetic interference shielding behaviors of carbon fibers-reinforced polypropylene matrix composites: II. Effects of filler length control’, J. Ind. Eng. Chem., 2014, 20, 3901–3904.
280.
LuoH.XiongG.ChenX.LiQ.MaC.LiD.WuX.: ‘ZnO nanostructures grown on carbon fibers: Morphology control and microwave absorption properties’, J. Alloy. Compd., 2014, 593, 7–15.
281.
ZhouW.XiaoP.LiY.ZhouL.: ‘Dielectric properties of BN modified carbon fibers by dip-coating’, Ceram. Int., 2013, 39, 6569–6576.
282.
ZengJ.TaoP.WangS.XuJ.: ‘Preparation and study on radar-absorbing materials of cupric oxide-nanowire-covered carbon fibers’, Appl. Surf. Sci., 2009, 255, 4916–4920.
283.
LuoX.ChungD. D. L.: ‘Electromagnetic interference shielding using continuous carbon-fiber carbon-matrix and polymer-matrix composites’, Compos. Part B: Eng., 1999, 30, 227–231.
284.
TianH.LiuH.ChengH.: ‘Mechanical and microwave dielectric properties of KD-I SiCf/SiC composites fabricated through precursor infiltration and pyrolysis’, Ceram. Int., 2014, 40, 9009–9016.
285.
DingD.LuoF.ShiY.ChenJ.: ‘Influence of thermal oxidation on complex permittivity and microwave absorbing potential of KD-I SiC fiber fabrics’, J. Eng. Fiber Fabr., 2014, 9, 99–104.
286.
TanE.KagawaY.DericiogluA. F.: ‘Electromagnetic wave absorption potential of SiC-based ceramic woven fabrics in the GHz range’, J. Mater. Sci., 2009, 44, 1172–1179.
287.
YeF.ZhangL. T.YinX. W.LiuY. S.ChengL. F.: ‘The improvement of wave-absorbing ability of silicon carbide fibers by depositing boron nitride coating’, Appl. Surf. Sci., 2013, 270, 611–616.
DupuisA. C.: ‘The catalyst in the CCVD of carbon nanotubes – a review’, Prog. Mater. Sci., 2005, 50, 929–961.
290.
ShiS.ZhangL.LiJ.: ‘High frequency electromagnetic interference shielding behaviors of Ti3SiC2/Al2O3 composites’, J. Appl. Phys., 2008, 103, 124103.
291.
WangD.SongY.LiY.: ‘Effect of composition and structure on specific resistivity of SiC fibers’, Trans. Nonferrous Met. Soc. China, 2012, 22, 1133–1139.
292.
MuY.ZhouW.WangC.LuoF.ZhuD.DingD.: ‘Mechanical and electromagnetic shielding properties of SiCf/SiC composites fabricated by combined CVI and PIP process’, Ceram. Int., 2014, 40, 10037–10041.
293.
MuY.ZhouW.LuoF.ZhuD.: ‘Effects of BN/SiC dual-layer interphase on mechanical and dielectric properties of SiCf/SiC composites’, Ceram. Int., 2014, 40, 3411–3418.
294.
MuY.ZhouW.HuY.QingY.LuoF.ZhuD.: ‘Improvement of mechanical and dielectric properties of PIP-SiCf/SiC composites by using Ti3SiC2 as inert filler’, Ceram. Int., 2015, 41, 4199–4206.
295.
LiuH.ChengH.WangJ.TangG.CheR.MaQ.: ‘Effects of the fiber surface characteristics on the interfacial microstructure and mechanical properties of the KD SiC fiber reinforced SiC matrix composites’, Mater. Sci. Eng. A, 2009, 525, 121–127.
296.
HuangZ.KangW.QingY.LuoF.ZhouW.ZhuD.: ‘Influences of SiC of content and length on the strength, toughness and dielectric properties of SiCf/LAS glass-ceramic composites’, Ceram. Int., 2013, 39, 3135–3140.
297.
WanF.LuoF.WangH.HuangZ.ZhouW.ZhuD.: ‘Effects of carbon black (CB) and alumina oxide on the electromagnetic-and microwave-absorption properties of SiC fiber/aluminum phosphate matrix composites’, Ceram. Int., 2014, 40, 15849–15857.
298.
LiQ.YinX. W.DuanW. Y.KongL.LiuX. M.ChengL. F.: ‘Improved dielectric and electromagnetic interference shielding properties of ferrocene-modified polycarbosilane derived SiC/C composite ceramics’, J. Eur. Ceram. Soc., 2014, 34, 2187–2201.
299.
TianH.LiuH. T.ChengH. F.: ‘A high-temperature radar absorbing structure: design, fabrication, and characterization’, Compos. Sci. Technol., 2014, 90, 202–208.
300.
Filbert-DemutI.TravitzkyN.MotzG.ZhitomirskyI.GreilP.: ‘Polymer derived ceramics reinforced with Ti3SiC2 coated SiC fibers: A feasibility study’, Mater. Lett., 2015, 145, 229–231.
301.
KangY.FeyT.GreilP.: ‘Synthesis of Ti2SnC MAX phase by mechanical activation and melt infiltration’, Adv. Eng. Mater., 2012, 14, 85–91.
302.
YinX.TravitzkyN.GreilP.: ‘Near-net-shape fabrication of Ti3AlC2-based composites’, Int. J. Appl. Ceram. Technol., 2007, 4, 184–190.
303.
CaiY. Z.YinX. W.FanS. W.ZhangL. T.ChengL. F.WangY. G.YinH. F.: ‘Effects of particle sizes and contents of ceramic fillers on tribological behavior of 3D C/C composites’, Ceram. Int., 2014, 40, 14029–14037.
SinghM.MatsunagaT.LinH. T.AsthanaR.IshikawT.: ‘Microstructure and mechanical properties of joints in sintered SiC fiber-bonded ceramics brazed with Ag-Cu-Ti alloy’, Mater. Sci. Eng. A, 2012, 557, 69–76.
310.
MorscherG. N.SinghM.ShpargelT.AsthanaR.: ‘A simple test to determine the effectiveness of different braze compositions for joining Ti-tubes to C/C composite plates’, Mater. Sci. Eng. A, 2006, 418, 19–24.
311.
LinK. L.SinghM.AsthanaR.LinC. H.: ‘Interfacial and mechanical characterization of yttria-stabilized zirconia (YSZ) to stainless steel joints fabricated using Ag-Cu-Ti interlayers’, Ceram. Int., 2014, 40, 2063–2071.
312.
HerrmannM.SchönfeldK.KlemmH.LippmannW.HurtadoA.MichaelisA.: ‘Laser-supported joining of SiC-fiber/SiCN ceramic matrix composites fabricated by precursor infiltration’, J. Eur. Ceram. Soc., 2014, 34, 2913–2924.
313.
RizzoS.GrassoS.SalvoM.CasalegnoV.ReeceM. J.FerrarisM.: ‘Joining of C/SiC composites by spark plasma sintering technique’, J. Eur. Ceram. Soc., 2014, 34, 903–913.
