Additive manufacturing (AM), widely known as 3D printing, is a method of manufacturing that forms parts from powder, wire or sheets in a process that proceeds layer by layer. Many techniques (using many different names) have been developed to accomplish this via melting or solid-state joining. In this review, these techniques for producing metal parts are explored, with a focus on the science of metal AM: processing defects, heat transfer, solidification, solid-state precipitation, mechanical properties and post-processing metallurgy. The various metal AM techniques are compared, with analysis of the strengths and limitations of each. Only a few alloys have been developed for commercial production, but recent efforts are presented as a path for the ongoing development of new materials for AM processes.
Get full access to this article
View all access options for this article.
References
1.
DeckardC. R.: ‘Part generation by layer-wise selective laser sintering’, MS thesis, Univeristy of Texas, Austin, TX, 1986.
DeckardC. R.: ‘Selective laser sintering’, PhD thesis, Univeristy of Texas, Austin, TX, 1988.
4.
BourellD. L.MarcusH. L.BarlowJ. W.BeamanJ. J.: ‘Selective laser sintering of metals and ceramics’, Int. J. Powder Metall., 1992, 28, 369–381.
5.
MarcusH. L.BourellD. L.BeamanJ. J.ManthiramA.BarlowJ. W.CrawfordR. H.: ‘Challenges in laser processed solid freeform fabrication’, Processing and Fabrication of Advanced Materials III, proceedings of the 1993 TMS materials week conference, Pittsburgh, PA, 17–21 October 1993, 127–133.
6.
Manriquez-FrayreJ. A.BourellD. L.: ‘Selective laser sintering of binary metallic powder’, in ‘Solid freeform fabrication symposium’, Austin, TX, 1990, 99–106.
7.
DeckardC. R.: ‘Method and apparatus for producing parts by selective sintering’, PCT Patent WO1988002677 A2, 1986.
8.
CimaM. J.HaggertyJ. S.SachsE. M.WilliamsP. A.: ‘Three-dimensional printing techniques’, US Patent US5204055 A, 1989.
Sandia-National-Laboratories: ‘Creating a complex metal part in a day is goal of commercial consortium’. Available athttp://www.sandia.gov/media/lens.htm
11.
WhiteD.: ‘Ultrasonic object consolidation’, US Patent US6519500 B1, 1999.
12.
LarsonR.: ‘Method and device for producing three-dimensional bodies’, US Patent US5786562 A, 1993.
ASTM-International: ‘Standard terminology for additive manufacturing technologies’, vol. F2792-12a, ed. West Conshohocken, PA, ASTM International, 2012.
15.
KruthJ. P.WangX.LaouiT.FroyenL.: ‘Lasers and materials in selective laser sintering’, Assembly Autom., 2003, 23, 357–371. doi: 10.1108/01445150310698652
16.
SamesW. J.MedinaF.PeterW. H.BabuS. S.DehoffR. R.: ‘Effect of process control and powder quality on Inconel 718 produced using electron beam melting’, in ‘Superalloy 718 and derivatives’, Pittsburgh, PA, 2014.
17.
VallabhajosyulaP.BourellD. L.: ‘Indirect selective laser sintered fully ferrous components – infiltration modeling, manufacturing and evaluation of mechanical properties’, in ‘Solid freeform fabrication symposium’, Austin, TX, 2009.
18.
KumarS.KruthJ. P.: ‘Effect of bronze infiltration into laser sintered metallic parts’, Mater. Des., 2007, 28, 400–407. doi: 10.1016/j.matdes.2005.09.016
19.
M. L. Griffith, D. L. Keicher, J. T. Romero, J. E. Smugeresky, C. L. Atwood, L. D. Harwell and D. L. Greene: ‘Laser Engineered Net Shaping (LENSTM) for the fabrication of metallic components’, in Proc. of the ‘1996 ASME international mechanical engineering congress and exposition’, November 17, 1996–November 22, 1996, Atlanta, GA, USA, 1996, 175–176.
20.
MudgeR. P.WaldN. R.: ‘Laser engineered net shaping advances additive manufacturing and repair’, Weld. J., 2007, 86, 44–48.
21.
MatzJ. E.EagarT. W.: ‘Carbide formation in alloy 718 during electron-beam solid freeform fabrication’, Metall. Mater. Trans. A, 2002, 33, 2559–2567. doi: 10.1007/s11661-002-0376-y
22.
BaufeldB.BrandlE.van der BiestO.: ‘Wire based additive layer manufacturing: Comparison of microstructure and mechanical properties of Ti–6Al–4 V components fabricated by laser-beam deposition and shaped metal deposition’, J. Mater. Process. Technol., 2011, 211, 1146–1158. doi: 10.1016/j.jmatprotec.2011.01.018
23.
XiongJ.ZhangG.: ‘Adaptive control of deposited height in GMAW-based layer additive manufacturing’, J. Mater. Process. Technol., 2014, 214, 962–968. doi: 10.1016/j.jmatprotec.2013.11.014
LevyG. N.SchindelR.KruthJ. P.: ‘Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives’, CIRP Ann. Manuf. Technol., 2003, 52, 589–609. doi: 10.1016/S0007-8506(07)60206-6
28.
ObikawaT.YoshinoM.ShinozukaJ.: ‘Sheet steel lamination for rapid manufacturing’, J. Mater. Process. Technol.J. Mater. Process. Technol., 1999, 89–90, 171–176. doi: 10.1016/S0924-0136(99)00027-8
29.
YiS.LiuF.ZhangJ.XiongS.: ‘Study of the key technologies of LOM for functional metal parts’, J. Mater. Process. Technol., 2004, 150, 175–181. doi: 10.1016/j.jmatprotec.2004.01.035
30.
ThomasH.AnjaT.SteffenN.EckhardB.: ‘Recent developments in metal laminated tooling by multiple laser processing’, Rapid Prototyping J., 2003, 9, 24–29. doi: 10.1108/13552540310455629
31.
B. Xu, X.-Y. Wu, J.-G. Lei, F. Luo, F. Gong, C.-L. Du, X.-Q. Sun and S.-C. Ruan: ‘Research on micro-electric resistance slip welding of copper electrode during the fabrication of 3D metal micro-mold’, J. Mater. Process. Technol., 2013, 213, 2174–2183. doi: 10.1016/j.jmatprotec.2013.06.009
32.
MuellerB.KochanD.: ‘Laminated object manufacturing for rapid tooling and patternmaking in foundry industry’, Comput. Ind., 1999, 39, 47–53. doi: 10.1016/S0166-3615(98)00127-4
33.
HimmerT.NakagawaT.AnzaiM.: ‘Lamination of metal sheets’, Comput. Ind., 1999, 39, 27–33. doi: 10.1016/S0166-3615(98)00122-5
34.
WhiteD. R.: ‘Ultasonic consolidation of aluminum tooling’, Adv. Mater. Process., 2003, 161, 64–65.
FrielR. J.HarrisR. A.: ‘Ultrasonic additive manufacturing – a hybrid production process for novel functional products’, Proc. CIRP, 2013, 6, 35–40. doi: 10.1016/j.procir.2013.03.004
37.
MasurtschakS.FrielR. J.GillnerA.RyllJ.HarrisR. A.: ‘Fiber laser induced surface modification/manipulation of an ultrasonically consolidated metal matrix’, J. Mater. Process. Technol., 2013, 213, 1792–1800. doi: 10.1016/j.jmatprotec.2013.04.008
38.
RamG. D. J.RobinsonC.YangY.StuckerB. E.: ‘Use of ultrasonic consolidation for fabrication of multi-material structures’, Rapid Prototyping J., 2007, 13, 226–235. doi: 10.1108/13552540710776179
39.
SriramanM. R.BabuS. S.ShortM.: ‘Bonding characteristics during very high power ultrasonic additive manufacturing of copper’, Scr. Mater., 2010, 62, 560–563. doi: 10.1016/j.scriptamat.2009.12.040
D. E. Schick, R. M. Hahnlen, R. Dehoff, P. Collins, S. S. Babu, M. J. Dapino and J. C. Lippold: ‘Microstructural characterization of bonding interfaces in aluminum 3003 blocks fabricated by ultrasonic additive manufacturing’, Weld. J., 2010, 89, 105s–115s.
42.
DehoffR. R.BabuS. S.: ‘Characterization of interfacial microstructures in 3003 aluminum alloy blocks fabricated by ultrasonic additive manufacturing’, Acta Mater., 2010, 58, 4305–4315. doi: 10.1016/j.actamat.2010.03.006
43.
FujiiH.SriramanM. R.BabuS. S.: ‘Quantitative evaluation of bulk and interface microstructures in Al-3003 alloy builds made by very high power ultrasonic additive manufacturing’, Metall. Mater. Trans. A, 2011, 42, 4045–4055. doi: 10.1007/s11661-011-0805-x
44.
SojiphanK.BabuS. S.YuX.VogelS. C.: ‘Quantitative evaluation of crystallographic texture in aluminum alloy builds fabricated by very high power ultrasonic additive manufacturing’, Presented at the ‘Solid Freeform Fabrication Symposium’, Austin, TX, 2012.
45.
SriramanM. R.GonserM.FujiiH. T.BabuS. S.BlossM.: ‘Thermal transients during processing of materials by very high power ultrasonic additive manufacturing’, J. Mater. Process. Technol., 2011, 211, 1650–1657. doi: 10.1016/j.jmatprotec.2011.05.003
46.
HerrA.PritchardJ.DapinoM.: ‘Interfacial shear strength estimates of NiTi-Al matrix composites fabricated via ultrasonic additive manufacturing’, Proceedings of SPIE – The international society for optical engineering, industrial and commercial applications of smart structures technologies, 2014, vol. 9059, article number: 905906.
47.
GibsonI.RosenD. W.StuckerB.: ‘Additive manufacturing technologies’, 2010, New York, NY, Springer.
48.
L. E. Murr, S. M. Gaytan, D. A. Ramirez, E. Martinez, J. Hernandez, K. N. Amato, P. W. Shindo, F. R. Medina and R. B. Wicker. ‘Metal fabrication by additive manufacturing using laser and electron beam melting technologies’, J. Mater. Sci. Technol., 2012, 28, 1–14.
49.
ListF. A.DehoffR. R.LoweL. E.SamesW. J.: ‘Properties of Inconel 625 mesh structures grown by electron beam additive manufacturing’, Mater. Sci. Eng. A, 2014, 615, 191–197. doi: 10.1016/j.msea.2014.07.051
50.
MumtazK. A.HopkinsonN.: ‘Selective Laser Melting of thin wall parts using pulse shaping’, J. Mater. Process. Technol., 2010, 210, 279–287. doi: 10.1016/j.jmatprotec.2009.09.011
SantomasoA.LazzaroP.CanuP.: ‘Powder flowability and density ratios: the impact of granules packing’, Chem. Eng. Sci., 2003, 58, 2857–2874. doi: 10.1016/S0009-2509(03)00137-4
53.
ZhaoX.ChenJ.LinX.HuangW.: ‘Study on microstructure and mechanical properties of laser rapid forming Inconel 718’, Mater. Sci. Eng. A, 2008, 478, 119–124. doi: 10.1016/j.msea.2007.05.079
54.
QiH.AzerM.RitterA.: ‘Studies of standard heat treatment effects on microstructure and mechanical properties of laser net shape manufactured INCONEL 718’, Metall. Mater. Trans. A, 2009, 40, 2410–2422. doi: 10.1007/s11661-009-9949-3
55.
MedinaF.: ‘Reducing metal alloy powder costs for use in powder bed fusion additive manufacturing: improving the economics for production’, PhD thesis, Materials Science and Engineering, University of Texas, El Paso, 2013.
56.
GuD. D.MeinersW.WissenbachK.PopraweR.: ‘Laser additive manufacturing of metallic components: materials, processes and mechanisms’, Int. Mater. Rev., 2012, 57, 133–164. doi: 10.1179/1743280411Y.0000000014
57.
ASTM-International: ‘Standard test methods for flow rate of metal powders using the Hall Flowmeter funnel’, B213-13, ed. West Conshohocken, PA, ASTM International, 2013.
58.
ASTM-International: ‘Standard test method for apparent density of free-flowing metal powders using the Hall Flowmeter funnel’, B212-13, ed. West Conshohocken, PA, ASTM International, 2013.
59.
LiuB.WildmanR.TuckC.AshcroftI.HagueR.: ‘Investigation the effect of particle size distribution on processing parameters optimization in selective laser melting process’, Presented at the ‘Solid Freeform Fabrication Symposium’, Austin, TX, 2011.
60.
SlotwinskiJ. A.GarbocziE. J.StutzmanP. E.FerrarisC. F.WatsonS. S.PeltzM. A.: ‘Characterization of metal powders used for additive manufacturing’, J. Res Natl. Inst. Stand. Technol., 119, 2014.
ZekovicS.DwivediR.KovacevicR.: ‘Numerical simulation and experimental investigation of gas–powder flow from radially symmetrical nozzles in laser-based direct metal deposition’, Int. J. Mach. Tools Manuf., 2007, 47, 112–123. doi: 10.1016/j.ijmachtools.2006.02.004
63.
KarlssonJ.SnisA.EngqvistH.LausmaaJ.: ‘Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti–6Al–4 V powder fractions’, J. Mater. Process. Technol., 2013, 213, 2109–2118. doi: 10.1016/j.jmatprotec.2013.06.010
64.
TanH.ZhangF.WenR.ChenJ.HuangW.: ‘Experiment study of powder flow feed behavior of laser solid forming’, Optics Lasers Eng, 2012, 50, 391–398. doi: 10.1016/j.optlaseng.2011.10.017
65.
TangH. P.QianM.LiuN.ZhangX. Z.YangG. Y.WangJ.: ‘Effect of powder reuse times on additive manufacturing of Ti–6Al–4V by selective electron beam melting’, JOM, 2015, 1–9.
66.
DonachieM. J., ‘Titanium: a technical guide’, ASM International, 2000.
67.
S. Stecker, K. W. Lachenberg, H. Wang and R. C. Salo: ‘Advanced electron beam free form fabrication methods & technology’, in ‘AWS welding show’, Atlanta, GA, 2006, 35–46.
68.
Murav'evV. I.KrupskiiR. F.FizulakovR. A.DemyshevP. G.: ‘Effect of the quality of filler wire on the formation of pores in welding of titanium alloys’, Weld. Int., 2008, 22, 853–858. doi: 10.1080/09507110802650610
69.
SyedW. U. H.PinkertonA. J.LiL.: ‘Combining wire and coaxial powder feeding in laser direct metal deposition for rapid prototyping’, Appl. Surf. Sci., 2006, 252, 4803–4808. doi: 10.1016/j.apsusc.2005.08.118
70.
KaplanA. F. H.PowellJ.: ‘Spatter in laser welding’, J. Laser Appl., 2011, 23, 032005–1–032005-7.
71.
SantosE. C.ShiomiM.OsakadaK.LaouiT.: ‘Rapid manufacturing of metal components by laser forming’, Int. J. Mach. Tools Manuf., 2006, 46, 1459–1468. doi: 10.1016/j.ijmachtools.2005.09.005
72.
LiS.ChenG.KatayamaS.ZhangY.: ‘Relationship between spatter formation and dynamic molten pool during high-power deep-penetration laser welding’, Appl. Surf. Sci., 2014, 303, 481–488. doi: 10.1016/j.apsusc.2014.03.030
73.
MahaleT. R.: ‘Electron beam melting of advanced materials and structures’, PhD thesis, North Carolina State University, 2009.
74.
EscheyC.LutzmannS.ZaehM. F.: ‘Examination of the powder spreading effect in electron beam melting (EBM)’, in ‘Solid freeform fabrication symposium’, Austin, TX, 2009, 308–319.
75.
KahnertM.LutzmannS.ZaehM. F.: ‘Layer formations in electron beam sintering’, in ‘Solid freeform fabrication symposium’, Austin, TX, 2007.
76.
W. E. King, H. D. Barth, V. M. Castillo, G. F. Gallegos, J. W. Gibbs, D. E. Hahn, C. Kamath and A. M. Rubenchik: ‘Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing’, J. Mater. Process. Technol., 2014, 214, 2915–2925. doi: 10.1016/j.jmatprotec.2014.06.005
77.
KornerC.BauereissA.AttarE.: ‘Fundamental consolidation mechanisms during selective beam melting of powders’, Modell. Simul. Mater. Sci. Eng., 2013, 21, 085011–1–085011–18. doi: 10.1088/0965-0393/21/8/085011
78.
VilaroT.ColinC.BartoutJ. D.: ‘As-fabricated and heat-treated microstructures of the Ti-6Al-4 V alloy processed by selective laser melting’, Metall. Mater. Trans. A, 2011, 42, 3190–3199. doi: 10.1007/s11661-011-0731-y
79.
FrazierW.: ‘Metal additive manufacturing: a review’, J. Mater. Eng. Performance, 2014, 23, 1917–1928. doi: 10.1007/s11665-014-0958-z
80.
SvenssonM.: ‘Ti6Al4 V manufactured with Electron Beam Melting (EBM): mechanical and chemical properties’, in ‘Aeromat 2009’, Dayton, OH, 2009.
81.
KobrynP. A.MooreE. H.SemiatinS. L.: ‘The effect of laser power and traverse speed on microstructure, porosity and build height in laser-deposited Ti-6Al-4V’, Scr. Mater., 2000, 43, 299–305. doi: 10.1016/S1359-6462(00)00408-5
82.
CarterL. N.AttallahM. M.ReedR. C.: ‘Laser powder bed fabrication of nickel-base superalloys: influence of parameters; characterisation, quantification and mitigation of cracking’, in ‘Superalloys 2012’,(ed. Eric S. Huron et al.), 577–586; 2012, Champion, PA, John Wiley & Sons, Inc.
KempenK.ThijsL.VranckenB.BulsS.Van HumbeeckJ.KruthJ.-P.: ‘Producing, crack-free, high density M2 HSS parts by selective laser melting: pre-heating the baseplate’, in ‘Solid freeform fabrication symposium’, Austin, TX, 2013.
85.
HusseinA.HaoL.YanC.EversonR.YoungP.: ‘Advanced lattice support structures for metal additive manufacturing’, J. Mater. Process. Technol., 2013, 213, 1019–1026. doi: 10.1016/j.jmatprotec.2013.01.020
86.
KruthJ. P.FroyenL.Van VaerenberghJ.MercelisP.RomboutsM.LauwersB.: ‘Selective laser melting of iron-based powder’, J. Mater. Process. Technol., 2004, 149, 616–622. doi: 10.1016/j.jmatprotec.2003.11.051
87.
ZähM. F.LutzmannS.: ‘Modelling and simulation of electron beam melting’, Product. Eng., 2010, 4, 15–23. doi: 10.1007/s11740-009-0197-6
88.
BauereißA.ScharowskyT.KörnerC.: ‘Defect generation and propagation mechanism during additive manufacturing by selective beam melting’, J. Mater. Process. Technol., 2014, 214, 2522–2528. doi: 10.1016/j.jmatprotec.2014.05.002
89.
KörnerC.AttarE.HeinlP.: ‘Mesoscopic simulation of selective beam melting processes’, J. Mater. Process. Technol., 2011, 211, 978–987. doi: 10.1016/j.jmatprotec.2010.12.016
90.
WuA.LeBlancM. M.KumarM.GallegosG. F.BrownD. W.KingW. E.: ‘Effect of laser scanning pattern and build direction in additive manufacturing on anisotropy, porosity and residual stress’, in ‘2014 TMS annual meeting & exhibition’, San Diego, CA, 2014.
91.
PrabhakarP.SamesW. J.DehoffR.BabuS. S.: ‘Computational modeling of residual stress formation during the electron beam melting process for Inconel 718′, Additive Manufacturing, 2015.
92.
MercelisP.KruthJ.-P.: ‘Residual stresses in selective laser sintering and selective laser melting’, Rapid Prototyping J., 2006, 12, 254–265. doi: 10.1108/13552540610707013
93.
Gnäupel-HeroldT.SlotwinskiJ.MoylanS.: ‘Neutron measurements of stresses in a test artifact produced by laser-based additive manufacturing’, AIP Conference Proc., 2014, 1581, 1205–1212. doi: 10.1063/1.4864958
94.
RangaswamyP.HoldenT. M.RoggeR. B.GriffithM. L.: ‘Residual stresses in components formed by the laser-engineered net shaping (LENS®) process’, J. Strain Anal. Eng. Des., 2003, 38, 519–527. doi: 10.1243/030932403770735881
95.
L. M. Sochalski-Kolbus, E. A. Payzant, P. A. Cornwell, T. R. Watkins, S. S. Babu, R. R. Dehoff, M. Lorenz, O. Ovchinnikova and C. Duty: ‘Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering’, Metall. Mater. Trans. A, 2015, 46, 1419–1432.
96.
BriceC. A.HofmeisterW. H.: ‘Determination of bulk residual stresses in electron beam additive-manufactured aluminum’, Metall. Mater. Trans. A, 2013, 44, 5147–5153. doi: 10.1007/s11661-013-1847-z
97.
J. Ding, P. Colegrove, J. Mehnen, S. Ganguly, P. M. Sequeira Almeida, F. Wang and S. Williams: ‘Thermo-mechanical analysis of Wire and Arc Additive Layer Manufacturing process on large multi-layer parts’, Comput. Mater. Sci., 2011, 50, 3315–3322.
98.
WuA. S.BrownD. W.KumarM.GallegosG. F.KingW. E.: ‘An experimental investigation into additive manufacturing-induced residual stresses in 316L stainless steel’, Metall. Mater. Trans. A, 2014, 45, 6260–6270. doi: 10.1007/s11661-014-2549-x
99.
SureshS.GiannakopoulosA. E.: ‘A new method for estimating residual stresses by instrumented sharp indentation’, Acta Mater., 1998, 46, 5755–5767. doi: 10.1016/S1359-6454(98)00226-2
100.
SongB.DongS.LiuQ.LiaoH.CoddetC.: ‘Vacuum heat treatment of iron parts produced by selective laser melting: microstructure, residual stress and tensile behavior’, Mater. Des., 2014, 54, 727–733. doi: 10.1016/j.matdes.2013.08.085
101.
PrimeM. B.: ‘Cross-sectional mapping of residual stresses by measuring the surface contour after a cut’, J. Eng. Mater. Technol., 2001, 123, 162–168. doi: 10.1115/1.1345526
102.
T. Watkins, H. Bilheux, A. Ke, A. Payzant, R. Dehoff, C. Duty, W. Peter, C. Blue and C. Brice: ‘Neutron characterization for additive manufacturing’, Adv. Mater. Process., 2013, 171, 23–27.
103.
MoatR. J.PinkertonA. J.LiL.WithersP. J.PreussM.: ‘Residual stresses in laser direct metal deposited Waspaloy’, Mater. Sci. Eng. A, 2011, 528, 2288–2298. doi: 10.1016/j.msea.2010.12.010
104.
ZaehM.BrannerG.: ‘Investigations on residual stresses and deformations in selective laser melting’, Product. Eng., 2010, 4, 35–45. doi: 10.1007/s11740-009-0192-y
105.
PrabhakarP.SamesW. J.SmithR.DehoffR.BabuS. S.: ‘Computational modeling of residual stress formation during the electron beam melting process for Inconel 718’, Additive Manuf., 2015, 7, 83–91.
Al-BermaniS. S.: ‘An investigation into microstructure and microstructural control of additive layer manufactured Ti–6Al–4V by electron beam melting’, PhD thesis, University of Sheffield, Sheffield, UK, 2011.
108.
GuH.GongH.PalD.RafiK.StarrT.StuckerB.: ‘Influences of energy density on porosity and microstructure of selective laser melted 17-4PH stainless steel’, in ‘Solid freeform fabrication symposium’, Austin, TX, 2013.
109.
HuntJ. D.: ‘Steady state columnar and equiaxed growth of dendrites and eutectic’, Mater. Sci. Eng., 1984, 65, 75–83. doi: 10.1016/0025-5416(84)90201-5
110.
L. Nastac, J. J. Valencia, M. L. Tims and F. R. Dax: ‘Advances in the solidification on IN718 and RS5 alloys’, in ‘Superalloys 718, 625, 706 and various derivatives’, 2001, 103–112.
111.
KörnerC.HelmerH.BauereißA.SingerR. F.: ‘Tailoring the grain structure of IN718 during selective electron beam melting’, in ‘EUROSUPERALLOYS’, 2014.
112.
GockelJ.BeuthJ.: ‘Understanding Ti–6Al–4 V microstructure control in additive manufacturing via process maps’, in ‘Solid freeform fabrication symposium’, Austin, TX, 2013.
113.
ShenN.ChouK.: ‘Thermal modeling of electron beam additive manufacturing process: powder sintering effects’, 2012.
114.
CarterL. N.MartinC.WithersP. J.AttallahM. M.: ‘The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy’, J. Alloys Compd., 2014, 615, 338–347. doi: 10.1016/j.jallcom.2014.06.172
115.
ZengK.PalD.StuckerB.: ‘A review of thermal analysis methods in laser sintering and selective laser melting’, in ‘Solid freeform fabrication symposium’, Austin, TX, 2012.
116.
MakiewiczK. T.: ‘Development of simultaneous transformation kinetics microstructure model with application to laser metal deposited Ti–6Al–4V and Alloy 718’, Ohio State University, 2013.
117.
SamesW. J.UnocicK. A.DehoffR. R.LollaT.BabuS. S.: ‘Thermal effects on microstructural heterogeneity of Inconel 718 materials fabricated by electron beam melting’, J. Mater. Res., 2014, 29, 1920–1930. doi: 10.1557/jmr.2014.140
118.
DinwiddieR. B.DehoffR. R.LloydP. D.LoweL. E.UlrichJ. B.: ‘Thermographic in-situ process monitoring of the electron beam melting technology used in additive manufacturing’, in ‘Thermosense: thermal infrared applications XXXV’, Baltimore, MD, 2013.
119.
QianB.ShiY. S.WeiQ. S.WangH. B.: ‘The helix scan strategy applied to the selective laser melting’, Int. J. Adv. Manuf. Technol., 2012, 63, 631–640. doi: 10.1007/s00170-012-3922-9
120.
FanZ.LiouF.: ‘Numerical modeling of the additive manufacturing (AM) processes of titanium alloy’ in ‘Titanium alloys – towards achieving enhanced properties for diversified applications’ (ed. AminA. K. M. N.), 3–28; 2012, Rijeka, Croatia, INTECHOPEN.COM.
121.
Y. Tian, D. McAllister, H. Colijn, M. Mills, D. Farson, M. Nordin and S. Babu: ‘Rationalization of microstructure heterogeneity in INCONEL 718 builds made by the direct laser additive manufacturing process’, Metall. Mater. Trans. A, 2014, 45, 4470–4483. doi: 10.1007/s11661-014-2370-6
SaundersN.GuoZ.LiX.MiodownikA. P.SchilleJ.-P.: ‘Using JMatPro to model materials properties and behavior’, J. Mater., 2003, 55, (12), 60–65.
124.
LukasH. L.FriesS. G.SundmanB.: ‘Computational thermodynamics, the Calphad method’, 2007, Cambridge, Cambridge University Press.
125.
RamirezJ. C.BeckermannC.KarmaA.DiepersH. J.: ‘Phase-field modeling of binary alloy solidification with coupled heat and solute diffusion’, Phys. Rev. E, 2004, 69, (5), 051607. doi: 10.1103/PhysRevE.69.051607
126.
RadhakrishnanB.GortiS.BabuS. S.: ‘Large scale phase field simulations of microstructure evolution during thermal cycling of Ti–6Al–4V’, 2015.
127.
N. Zhou, D. C. Lv, H. L. Zhang, D. McAllister, F. Zhang, M. J. Mills and Y. Wang: ‘Computer simulation of phase transformation and plastic deformation in IN718 superalloy: Microstructural evolution during precipitation’, Acta Mater., 2014, 65, 270–286. doi: 10.1016/j.actamat.2013.10.069
128.
MoserD.PannalaS.MurthyJ.: ‘Computation of effective thermal conductivity of powders for selective laser sintering simulations’, Presented at the ‘ICHMT International Symposium on Advances in Computational Heat Transfer’, Piscataway, NJ, 2015.
129.
KingW.AndersonA. T.FerenczR. M.HodgeN. E.KamathC.KhairallahS. A.: ‘Overview of modelling and simulation of metal powder–bed fusion process at Lawrence Livermore National Laboratory’, Mater. Sci. Technol., 2014, doi:1743284714Y.0000000728
130.
KhairallahS. A.AndersonA.: ‘Mesoscopic simulation model of selective laser melting of stainless steel powder’, J. Mater. Process. Technol., 2014, 214, 2627–2636. doi: 10.1016/j.jmatprotec.2014.06.001
131.
FerzigerJ. H.PerićM.: ‘Computational methods for fluid dynamics’, 1996, New York, Springer.
132.
TeamT. T.: ‘Truchas user's manual, Version 2.3.0.’, Los Alamos National Laboratory, Los Alamos, NM, USA, 2007
133.
PannalaS.SimunovicS.RaghavanN.CarlsonN.BabuS.TurnerJ.: ‘The role of path sequencing on additive manufacturing: effect on phase change dynamics and heat transfer’, in ‘3rd World congress on integrated computational material engineering: ICME models, tools and infrastructure IV’, Colorado Springs, CO, 2015.
134.
RaghavanN.PannalaS.SimunovicS.CarlsonN.BabuS.TurnerJ.: ‘Study of the influence of heat source parameters and build profile on the melt pool dynamics in additive manufacturing’, in ‘3rd World congress on integrated computational materials engineering’, Colorado Springs, CO, 2015.
135.
ManvatkarV.DeA.DebRoyT.: ‘Heat transfer and material flow during laser assisted multi-layer additive manufacturing’, J. Appl. Phys., 2014, 116, (12), 124905. doi: 10.1063/1.4896751
136.
ZengK.PalD.GongH. J.PatilN.StuckerB.: ‘Comparison of 3DSIM thermal modelling of selective laser melting using new dynamic meshing method to ANSYS’, Mater. Sci. Technol., 2014, 31, 945–956. doi: 10.1179/1743284714Y.0000000703
137.
KnowlesC. R.BeckerT. H.TaitR. B.: ‘Residual stress measurements and structural integrity implications for selective laser melted TI–6AL–4V’, South African J. Indus. Eng., 2012, 23, 119–129. doi: 10.7166/23-3-515
138.
BelletM.ThomasB.: ‘Solidification macroprocesses (thermal—mechanical modeling of stress, distorsion and hot-tearing)’, in ‘Materials processing handbook’, (ed. PowersM. T.LaverniaE. J.GrozaJ. R.ShackelfordJ. F.), 2007, CRC Press, Taylor and Francis.
139.
HodgeN. E.FerenczR. M.SolbergJ. M.: ‘Implementation of a thermomechanical model for the simulation of selective laser melting’, Comput. Mech., 2014, 54, 33–51. doi: 10.1007/s00466-014-1024-2
140.
BrandlE.GreitemeierD.: ‘Microstructure of additive layer manufactured Ti–6Al–4V after exceptional post heat treatments’, Mater. Lett., 2012, 81, 84–87. doi: 10.1016/j.matlet.2012.04.116
141.
BrandlE.SchoberthA.LeyensC.: ‘Morphology, microstructure and hardness of titanium (Ti–6Al–4V) blocks deposited by wire-feed additive layer manufacturing (ALM)’, Mater. Sci. Eng. A, 2012, 532, 295–307. doi: 10.1016/j.msea.2011.10.095
142.
K. N. Amato, S. M. Gaytan, L. E. Murr, E. Martinez, P. W. Shindo, J. Hernandez, S. Collins and F. Medina: ‘Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting’, Acta Mater., 2012, 60, 2229–2239. doi: 10.1016/j.actamat.2011.12.032
143.
CaoJ.LiuF.LinX.HuangC.ChenJ.HuangW.: ‘Effect of overlap rate on recrystallization behaviors of Laser Solid Formed Inconel 718 superalloy’, Optics Laser Technol., 2013, 45, 228–235. doi: 10.1016/j.optlastec.2012.06.043
144.
BlackwellP. L.: ‘The mechanical and microstructural characteristics of laser-deposited IN718’, J. Mater. Process. Technol., 2005, 170, 240–246. doi: 10.1016/j.jmatprotec.2005.05.005
145.
FacchiniL.MagaliniE.RobottiP.MolinariA.: ‘Microstructure and mechanical properties of Ti–6Al–4V produced by electron beam melting of pre-alloyed powders’, Rapid Prototyping J., 2009, 15, 171–178. doi: 10.1108/13552540910960262
146.
MurrL. E.MartinezE.GaytanS. M.RamirezD. A.MachadoB. I.ShindoP. W., J. L. Martinez, F. Medina, J. Wooten, D. Ciscel, U. Ackelid and R. B. Wicker: ‘Microstructural architecture, microstructures and mechanical properties for a nickel-base superalloy fabricated by electron beam melting’, Metall. Mater. Trans. A, 2011, 42, 3491–3508. doi: 10.1007/s11661-011-0748-2
147.
BamptonC.WootenJ.HayesB.: ‘Additive manufactuing by electron beam melting (EBM) of alloy 718′, in ‘Material science & technology’, Montreal, Canada, 2013.
148.
UnocicK. A.KolbusL. M.DehoffR. R.DryepondtS. N.PintB. A.: ‘High-temperature performance of N07718 processed by additive manufacturing’, in ‘NACE Corrosion 2014’, San Antonio, TX, 2014.
149.
StrondlA.MilenkovicS.SchneiderA.KlementU.FrommeyerG.: ‘Effect of processing on microstructure and physical properties of three nickel-based superalloys with different hardening mechanisms’, Adv. Eng. Mater., 2012, 14, 427–438. doi: 10.1002/adem.201100349
150.
StrondlA.PalmM.GnaukJ.FrommeyerG.: ‘Microstructure and mechanical properties of nickel based superalloy IN718 produced by rapid prototyping with electron beam melting (EBM)’, Mater. Sci. Technol., 2011, 27, 876–883. doi: 10.1179/026708309X12468927349451
151.
ŁyczkowskaE.SzymczykP.DybałaB.ChlebusE.: ‘Chemical polishing of scaffolds made of Ti–6Al–7Nb alloy by additive manufacturing’, Arch. Civil Mech. Eng, 2014, 14, (4), 586–594.
152.
R. Dehoff, C. Duty, W. Peter, Y. Yamamoto, C. Wei, C. Blue and C. Tallman: ‘Case study: additive manufacturing of aerospace brackets’, Adv. Mater. Process., 2013, 171, 19–22.
153.
LasemiA.XueD.GuP.: ‘Recent development in CNC machining of freeform surfaces: a state-of-the-art review’, Computer-Aided Design, 2010, 42, 641–654. doi: 10.1016/j.cad.2010.04.002
154.
KarunakaranK. P.SuryakumarS.PushpaV.AkulaS.: ‘Low cost integration of additive and subtractive processes for hybrid layered manufacturing’, Robotics Computer-Integrated Manuf.2010, 26, 490–499. doi: 10.1016/j.rcim.2010.03.008
155.
JonesJ.McNuttP.TosiR.PerryC.WimpennyD.: ‘Remanufacture of turbine blades by laser cladding, machining and in-process scanning in a single machine’, in ‘Solid freeform fabrication symposium’, Austin, TX, 2012.
VranckenB.ThijsL.KruthJ. P.Van HumbeeckJ.: ‘Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting’, Acta Mater., 2014, 68, 150–158. doi: 10.1016/j.actamat.2014.01.018
158.
LandinJ.: ‘Unique breakthrough in bulk metallic glass manufacturing’, ed: Mid Sweden University, 2012.
159.
PrestC. D.PooleJ. C.StevickJ.WaniukT. A.PhamQ. T.: ‘Layer-by-layer construction with bulk metallic glasses’, US Patent US 20130309121 A1, 2012.
160.
KunceI.PolanskiM.BystrzyckiJ.: ‘Microstructure and hydrogen storage properties of a TiZrNbMoV high entropy alloy synthesized using Laser Engineered Net Shaping (LENS)’, Int. J. Hydrogen Energy, 2014, 39, 9904–9910. doi: 10.1016/j.ijhydene.2014.02.067
161.
PolanskiM.KwiatkowskaM.KunceI.BystrzyckiJ.: ‘Combinatorial synthesis of alloy libraries with a progressive composition gradient using laser engineered net shaping (LENS): Hydrogen storage alloys’, Int. J. Hydrogen Energy, 2013, 38, 12159–12171. doi: 10.1016/j.ijhydene.2013.05.024
162.
NiuF.WuD.ZhouS.MaG.: ‘Power prediction for laser engineered net shaping of Al2O3 ceramic parts’, J. Eur. Ceramic Soc., 2014, 34, 3811–3817. doi: 10.1016/j.jeurceramsoc.2014.06.023
163.
BallaV. K.BoseS.BandyopadhyayA.: ‘Microstructure and wear properties of laser deposited WC–12%Co composites’, Mater. Sci. Eng. A, 2010, 527, 6677–6682. doi: 10.1016/j.msea.2010.07.006
164.
HornT.: ‘Material development for electron beam melting’, NC State University, 2013.
165.
GrongO., ‘Metallurgical modeling of welding’, 2nd edn, The Institute of Materials, 1997.
166.
DavidS. A.VitekJ. M.: ‘Correlation between solidification parameters and weld microstructures’, Int. Mater. Rev., 1989, 34, 213–245. doi: 10.1179/imr.1989.34.1.213
167.
Al-BermaniS. S.BlackmoreM. L.ZhangW.ToddI.: ‘The origin of microstructural diversity, texture and mechanical properties in electron beam melted Ti–6Al–4V’, Metall. Mater. Trans. A, 2010, 41, 3422–3434. doi: 10.1007/s11661-010-0397-x
168.
EdwardsP.RamuluM.: ‘Fatigue performance evaluation of selective laser melted Ti–6Al–4V’, Mater. Sci. Eng. A, 2014, 598, 327–337. doi: 10.1016/j.msea.2014.01.041
169.
YuJ.RomboutsM.MaesG.MotmansF.: ‘Material properties of Ti6Al4V parts produced by laser metal deposition’, Phys. Proc., 2012, 39, 416–424. doi: 10.1016/j.phpro.2012.10.056
170.
AmsterdamE.KoolG. A.: ‘High cycle fatigue of laser beam deposited Ti–6Al–4V and Inconel 718’, in ‘ICAF 2009, Bridging the Gap between Theory and Operational Practice’, (ed. BosM. J.), 1261–1274, 2009, Netherlands, Springer.
171.
WangZ.GuanK.GaoM.LiX.ChenX.ZengX.: ‘The microstructure and mechanical properties of deposited-IN718 by selective laser melting’, J. Alloys Compd., 2012, 513, 518–523. doi: 10.1016/j.jallcom.2011.10.107
172.
ParimiL. L.ClarkR. G. A D.AttallahM. M.: ‘Microstructural and texture development in direct laser fabricated IN718’, Mater. Charact., 2014, 89, 102–111. doi: 10.1016/j.matchar.2013.12.012
AntonysamyA. A.MeyerJ.PrangnellP. B.: ‘Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting’, Mater. Charact., 2013, 84, 153–168. doi: 10.1016/j.matchar.2013.07.012
175.
ThijsL.KempenK.KruthJ.-P.Van HumbeeckJ.: ‘Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder’, Acta Mater., 2013, 61, 1809–1819. doi: 10.1016/j.actamat.2012.11.052
176.
MirelesJ.TerrazasC.MedinaF.WickerR.: ‘Automatic feedback control in electron beam melting using infrared tomography’, in ‘Solid freeform fabrication symposium’, Austin, TX, 2013.
177.
ThijsL.Montero SistiagaM. L.WauthleR.XieQ.KruthJ.-P.Van HumbeeckJ.: ‘Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum’, Acta Mater., 2013, 61, 4657–4668. doi: 10.1016/j.actamat.2013.04.036
178.
DehoffR. R.KirkaM. M.ListF. A.UnocicK. A.SamesW. J.: ‘Crystallographic texture engineering through novel melt strategies via electron beam processing: Inconel 718’,Mater. Sci. Technol., 2015, 31, (8), 939–944.
179.
HelmerH. E.KörnerC.SingerR. F.: ‘Additive manufacturing of nickel-based superalloy Inconel 718 by selective electron beam melting: Processing window and microstructure’, J. Mater. Res., 2014, 29, 1987–1996. doi: 10.1557/jmr.2014.192
180.
MitznerS.LiuS.DomackM.HafleyR.: ‘Grain refinement of freeform fabricated Ti–6Al–4V alloy using beam/arc modulation’, in ‘Solid freeform fabrication symposium’, Austin, TX, 2012.
181.
R. R. Dehoff, M. M. Kirka, W. J. Sames, H. Bilheux, A. S. Tremsin, L. E. Lowe and S. S. Babu: ‘Site specific control of crystallographic grain orientation through electron beam additive manufacturing’,Mater. Sci. Technol., 2015, 31, (8), 931–938.
182.
ThijsL.VerhaegheF.CraeghsT.HumbeeckJ. V.KruthJ.-P.: ‘A study of the microstructural evolution during selective laser melting of Ti–6Al–4V’, Acta Mater., 2010, 58, 3303–3312. doi: 10.1016/j.actamat.2010.02.004
183.
D. A. Ramirez, L. E. Murr, E. Martinez, D. H. Hernandez, J. L. Martinez, B. I. Machado, F. Medina, P. Frigola and R. B. Wicker: ‘Novel precipitate–microstructural architecture developed in the fabrication of solid copper components by additive manufacturing using electron beam melting’, Acta Mater., 2011, 59, 4088–4099. doi: 10.1016/j.actamat.2011.03.033
184.
CherryJ. A.DaviesH. M.MehmoodS.LaveryN. P.BrownS. G. R.SienzJ.: ‘Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting’, Int. J. Adv. Manuf. Technol., 2015, 76, 869–879. doi: 10.1007/s00170-014-6297-2
185.
WangF.WilliamsS.ColegroveP.AntonysamyA.: ‘Microstructure and mechanical properties of wire and arc additive manufactured Ti–6Al–4V’, Metall. Mater. Trans. A, 2013, 44, 968–977. doi: 10.1007/s11661-012-1444-6
186.
RudyJ. F.RupertE. J.: ‘Effects of porosity on mechanical properties of aluminum welds’, Weld. J., 1970, 49, 322s–336s.
187.
AshtonR. F.WesleyR. P.DixonC. R.: ‘The effect of porosity on 5086-H116 aluminum alloy welds’, Weld. J., 1975, 54, (3), 95–98.
188.
WyciskE.SolbachA.SiddiqueS.HerzogD.WaltherF.EmmelmannC.: ‘Effects of defects in laser additive manufactured Ti–6Al–4V on fatigue properties’, Phys. Proc., 2014, 56, 371–378. doi: 10.1016/j.phpro.2014.08.120
189.
RafiH. K.StarrT.StuckerB.: ‘A comparison of the tensile, fatigue, and fracture behavior of Ti–6Al–4V and 15–5 PH stainless steel parts made by selective laser melting’, Int. J. Adv. Manuf. Technol., 2013, 69, 1299–1309. doi: 10.1007/s00170-013-5106-7
HrabeN.QuinnT.: ‘Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4V) fabricated using electron beam melting (EBM), Part 2: Energy input, orientation, and location’, Mater. Sci. Eng. A, 2013, 573, 271–277. doi: 10.1016/j.msea.2013.02.065
192.
ASTM-International: ‘Standard specification for additive manufacturing titanium-6 aluminum-4 vanadium ELI (extra low interstitial) with powder bed fusion’, F3001-14, ed. West Conshohocken, PA: ASTM International, 2014.
193.
ASTM-International: ‘Standard specification for additive manufacturing nickel alloy (UNS N07718) with powder bed fusion’, F3055-14, ed. West Conshohocken, PA: ASTM International, 2014.
194.
ASTM-International: ‘Standard specification for additive manufacturing nickel alloy (UNS N06625) with powder bed fusion’, F3056-14, ed. West Conshohocken, PA: ASTM International, 2014.
195.
HrabeN.KircherR.QuinnT.: ‘Effects of processing on microstructure and mechanical properties of Ti–6Al–-4 V fabricated using electron beam melting (EBM): orientation and location’, in ‘Solid freeform fabrication’ Symposium, Austin, TX, 2012.
196.
HrabeN.QuinnT.: ‘Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4 V) fabricated using electron beam melting (EBM), part 1: distance from build plate and part size’, Mater. Sci. Eng. A, 2013, 573, 264–270. doi: 10.1016/j.msea.2013.02.064
197.
KobrynP. A.SemiatinS. L.: ‘Mechanical properties of laser-deposited Ti–6Al–4V’, in ‘Solid freeform fabrication proceedings’, Austin, TX, 2001.
198.
PalD.PatilN.StuckerB.: ‘Prediction of mechanical properties of electron beam melted Ti6Al4V parts using dislocation density based crystal plasticity framework’, in ‘Solid freeform fabrication symposium’, Austin, TX, 2012.
199.
BrodinH.AnderssonO.JohanssonS.: ‘Mechanical testing of a selective laser melted superalloy’, in ‘13th International conference on fracture’, Beijing, China, 2013.
200.
DutyC. E.JeanD. L.LackeyW. J.: ‘Design of a laser CVD rapid prototyping system’, in ‘Ceramic engineering and science proceedings’, vol. 20, 1999, 347–354.
201.
WallenbergerF. T.: ‘Rapid prototyping directly from the vapor phase’, Science, 1995, 267, 1274–1275. doi: 10.1126/science.267.5202.1274
202.
SovaA.GrigorievS.OkunkovaA.SmurovI.: ‘Potential of cold gas dynamic spray as additive manufacturing technology’, Int. J. Adv. Manuf. Technol., 2013, 69, 2269–2278. doi: 10.1007/s00170-013-5166-8
203.
IrissouE.LegouxJ.-G.RyabininA.JodoinB.MoreauC.: ‘Review on cold spray process and technology: part i—intellectual property’, J. Thermal Spray Technol., 2008, 17, 495–516. doi: 10.1007/s11666-008-9203-3
PalanivelS.MishraR. S.: ‘Friction stir additive manufacturing for high structural performance through microstructural control’, in ‘RAPID 2014’, Detroit, MI, 2014.
L. J. Love, V. Kunc, O. Rios, C. E. Duty, A. M. Elliott, B. K. Post, R. J. Smith and C. A. Blue: ‘The importance of carbon fiber to polymer additive manufacturing’, J. Mater. Res., 2014, 29, 1893–1898. doi: 10.1557/jmr.2014.212
216.
C. Holshouser, C. Newell, S. Palas, L. J. Love, V. Kunc, R. Lind, P. D. Lloyd, J. Rowe, R. R. Dehoff, W. Peter and C. Blue: ‘Out of bounds additive manufacturing’, Adv. Mater. Process., 2013, 171, 15–17.
217.
PearceJ. M.: ‘Building research equipment with free, open-source hardware’, Science, 2012, 337, 1303–1304. doi: 10.1126/science.1228183
218.
AnzaloneG. C.ChenlongZ.WijnenB.SandersP. G.PearceJ. M.: ‘A low-cost open-source metal 3-D printer’, IEEE Access, 2013, 1, 803–810. doi: 10.1109/ACCESS.2013.2293018
219.
ScharowskyT.OsmanlicF.SingerR. F.KörnerC.: ‘Melt pool dynamics during selective electron beam melting’, Appl. Phys. A, 2014, 114, 1303–1307. doi: 10.1007/s00339-013-7944-4
220.
RodriguezE.: ‘Development of a thermal imaging feedback control system in electron beam melting’, ETD Collection for University of Texas, El Paso, 2013.
221.
PavlovM.DoubenskaiaM.SmurovI.: ‘Pyrometric analysis of thermal processes in SLM technology’, Phys. Proc., 2010, 5Part B, 523–531. doi: 10.1016/j.phpro.2010.08.080
222.
MoylanS.WhitentonE.LaneB.SlotwinskiJ.: ‘Infrared thermography for laser-based powder bed fusion additive manufacturing processes’, AIP Conf. Proc., 2014, 1581, 1191–1196. doi: 10.1063/1.4864956
223.
SlotwinskiJ. A.GarbocziE. J.: ‘Porosity of additive manufacturing parts for process monitoring’, AIP Conf. Proc., 2014, 1581, 1197–1204. doi: 10.1063/1.4864957
224.
SpieringsA. B.SchneiderM.EggenbergerR.: ‘Comparison of density measurement techniques for additive manufactured metallic parts’, Rapid Prototyping J., 2011, 17, 380–386. doi: 10.1108/13552541111156504
AtzeniE.SalmiA.: ‘Economics of additive manufacturing for end-usable metal parts’, Int. J. Adv. Manuf. Technol., 2012, 62, 1147–1155. doi: 10.1007/s00170-011-3878-1
KoptyugA.RannarL.-E.BackstromM.FranzenS. F.DerandP.: ‘Additive manufacturing technology applications targeting practical surgery’, Int. J. Life Sci. Med. Res., 2013, 3, 15–24. doi: 10.5963/LSMR0301003
231.
van NoortR.: ‘The future of dental devices is digital’, Dental Mater., 2012, 28, 3–12. doi: 10.1016/j.dental.2011.10.014
232.
AyyıldızS.: ‘The place of direct metal laser sintering (DMLS) in dentistry and the importance of annealing’, Mater. Sci. Eng. C, 2015, 52, 343. doi: 10.1016/j.msec.2015.03.016
BiZ.ParanthamanM. P.MenchhoferP. A.DehoffR. R.BridgesC. A.ChiM.GuoB.SunaX-G.DaiS.: ‘Self-organized amorphous TiO2 nanotube arrays on porous Ti foam for rechargeable lithium and sodium ion batteries’, J. Power Sources, 2013, 222, 461–466. doi: 10.1016/j.jpowsour.2012.09.019
MerktS.HinkeC.SchleifenbaumH.VoswinckelH.: ‘Integrative technology evaluation model (ITEM) for selective laser melting (SLM)’, Adv. Mater. Res., 2011, 337, 274–280. doi: 10.4028/www.scientific.net/AMR.337.274
238.
PereiraM. F. V. T.WilliamsM.du PreezW. B.: ‘Application of laser additive manufacturing to produce dies for aluminium high pressure die-casting’, South African J. Ind. Eng., 2012, 23, 147–158.
239.
S. S. Babu, L. Love. R. Dehoff, W. Peter, T. Watkins and S. Pannala:‘Additive manufacturing of materials: opportunities and challenges’, MRS Bulletin., 2015, 40, 1154–1161.
McCrackenC. G.MotchenbacherC.BarbisD. P.: ‘Review of titanium-powder-production methods’, Int. J. Powder Metall., 2010, 46, 19–26.
248.
WuX.: ‘A review of laser fabrication of metallic engineering components and of materials’, Mater. Sci. Technol., 2007, 23, 631–640. doi: 10.1179/174328407X179593
249.
‘Additive manufacturing: heavy metal’. The Economist, May 3, 2014
250.
NIST: ‘Measurement science roadmap for metal-based additive manufacturing’, National Institute for Standards and Technology, 2013.
E. Rodriguez, F. Medina, D. Espalin, C. Terrazas, D. Muse, C. Henry, E. MacDonald and R. Wicker: ‘Integration of a thermal imaging feedback control system in electron beam melting’, in ‘Solid freeform fabrication symposium’, Austin, TX, 2012.
259.
AnderssonL.-E.LarssonM.: ‘Device and arrangment for producing a three-dimensional object’, US Patent US 7537722 B2, 2000.
260.
JeantetteF. P.KeicherD. M.RomeroJ. A.SchanwaldL. P.: ‘Method and system for producing complex-shape objects’, US Patent US 6046426 A, 1996.
261.
“Nickel-base superalloys’, in ‘Heat Treater's guide: practices and procedures for nonferrous alloys’, ASM International, 1996, 41–58.
262.
MallikM. K.RaoC. S.Kesava RaoV. V. S.: ‘Effect of heat treatment on hardness of Co–Cr–Mo alloy deposited with laser engineered net shaping’, Proc. Eng., 2014, 97, 1718–1723. doi: 10.1016/j.proeng.2014.12.323
263.
SunS.-H.KoizumiY.KurosuS.LiY.-P.MatsumotoH.ChibaA.: ‘Build direction dependence of microstructure and high-temperature tensile property of Co–Cr–Mo alloy fabricated by electron beam melting’, Acta Mater., 2014, 64, 154–168. doi: 10.1016/j.actamat.2013.10.017
264.
E. Martinez, L E. Murr, J. Hernandez, X. Pan, K. Amato, P. Frigola, C. Terrazas, S. Gaytan, E. Rodriguez, F. Medina and R. Y. Wicker: ‘Microstructures of niobium components fabricated by electron beam melting’, Metallogr. Microstruct. Anal., 2013, 2, 183–189. doi: 10.1007/s13632-013-0073-9
265.
M. Terner, S. Biamino, P. Epicoco, A. Penna, O. Hedin, S. Sabbadini, P. Fino, M. Pavese, U. Ackelid, P. Gennaro, F. Pelissero and C. Badini: ‘Electron beam melting of high niobium containing TiAl alloy: feasibility investigation’, Steel Res. Int., 2012, 83, 943–949. doi: 10.1002/srin.201100282
266.
RamspergerM.Mújica RonceryL.Lopez-GalileaI.SingerR. F.TheisenW.KörnerC.: ‘Solution heat treatment of the single crystal nickel-base superalloy CMSX-4 fabricated by selective electron beam melting’, Adv. Eng. Mater., 2015, 17, (10), 1486–1493.
267.
ZhangD. Q.LiuZ. H.CaiQ. Z.LiuJ. H.ChuaC. K.: ‘Influence of Ni content on microstructure of W–Ni alloy produced by selective laser melting’, Int. J. Refractory Metals Hard Mater., 2014, 45, 15–22. doi: 10.1016/j.ijrmhm.2014.02.007
268.
“ExOne adds new metal 3D printing material’, Metal Powder Report, 2013, 68, 36, 9.
269.
ChouD.-T.WellsD.HongD.LeeB.KuhnH.KumtaP. N.: ‘Novel processing of iron–manganese alloy-based biomaterials by inkjet 3-D printing’, Acta Biomater., 2013, 9, 8593–8603. doi: 10.1016/j.actbio.2013.04.016
270.
S. M. Gaytan, M. A. Cadena, H. Karim, D. Delfin, Y. Lin, D. Espalin, E. MacDonald and R. B. Wicker: ‘Fabrication of barium titanate by binder jetting additive manufacturing technology’, Ceramics Int, 2015, 41, (5A), 6610–6619. doi: 10.1016/j.ceramint.2015.01.108
271.
LewisG. K.SchliengerE.: ‘Practical considerations and capabilities for laser assisted direct metal deposition’, Mater. Des., 2000, 21, 417–423. doi: 10.1016/S0261-3069(99)00078-3
