Recent studies have indicated that the steady state thicknesses and interface temperatures of freeze linings can be influenced by factors other than the thermal parameters of the systems. To explore these possibilities further cold modelling of freeze linings was undertaken in the CaCl2–H2O system using an experimental apparatus that enabled the variation of both the bath temperature and the fluid flow rate. Through in situ experimental observations, it was shown that the phases formed, the deposit/liquid interface temperature and the freeze lining thicknesses depend strongly on chemical parameters and elementary reaction steps, which are not considered by the conventional thermal treatment of freeze linings. These results indicate the need for further systematic investigation of various process parameters that influence the elementary reaction steps that may be active in these systems under dynamic steady state conditions.
BlancherS. B, SayasenhA, CrespoE.2015. Follow-up and mineralogical characterization of freeze lining evolution: a record of furnace life. In: Metal 2015. Brno: Tanger Ltd.; p. 1387–1393.
2.
BruggemanJN, DankaDJ.1990. Two-dimensional thermal modeling of the hall-héroult cell. In: BickertM, editor. Light Met.Warrrendalte: TMS; p. 203–209.
3.
CampfortsM, BlanpainB, WollantsP.2009. The importance of slag engineering in freeze-lining applications. Metall Mater Trans B. 40(5):643–655. doi: 10.1007/s11663-009-9258-7
4.
ChenJJJ, WeiCC, ThomsonS, WelchBJ, TaylorMP.1994. A study of cell ledge heat transfer using an analogue ice-water model. In: MannweilerU, editor. Light Met.Warrendale: TMS; p. 285–293.
5.
Conde-PetitMR.2014. Aqueous solutions of lithium and calcium chlorides: property formulations for use in air conditioning equipment design. Zurich: M. Conde Engineering.
6.
CrivitsT.2016. Fundamental studies on the chemical aspects of freeze linings [PhD thesis]. University of Queensland.
7.
DOWChemical. 2002. Calcium chloride handbook: a guide to properties, forms, storage and handling. Midland, MI: The DOW Chemical Company.
8.
Fallah-MehrjardiA.2013. Investigation of freeze-lining formation in metallurgical systems [PhD Thesis]. University of Queensland.
9.
Fallah-MehrjardiA, HayesPC, JakE.2013a. Investigation of freeze-linings in copper-containing slag systems: part I. preliminary experiments. Metall Trans B. 44B:534–548. doi: 10.1007/s11663-013-9806-z
10.
Fallah-MehrjardiA, HayesPC, JakE.2013b. Investigation of freeze linings in copper-containing slag systems: part II. mechanism of the deposit stabilization. Metall Trans B. 44B:549–560. doi: 10.1007/s11663-013-9807-y
11.
Fallah-MehrjardiA, HayesPC, JakE.2013 c. Investigation of freeze lining in copper-containing slag systems: Part III. High-temperature experimental investigation of the effect of bath agitation. Metall Mater B. 44B:1337–1351. doi: 10.1007/s11663-013-9925-6
12.
Fallah-MehrjardiA, HayesPC, JakE.2014a. Investigation of freeze-linings in aluminum production cells. Metall Mater Trans B. 45(4):1232–1247. doi: 10.1007/s11663-014-0078-z
Fallah-MehrjardiA, HayesPC, JakE.2014 c. Further experimental investigation of freeze-lining/bath interface at steady-state conditions. Met Trans B. 45(6):2040–2049. doi: 10.1007/s11663-014-0149-1
15.
Fallah-MehrjardiA, HayesPC, VervyncktS, JakE.2014. Investigation of freeze-linings in a nonferrous industrial slag. Metall Mater Trans B. 45(3):850–863. doi: 10.1007/s11663-014-0074-3
16.
Fallah-MehrjardiA, JanssonJ, TaskinenP, HayesPC, JakE.2014. Investigation of the freeze-lining formed in an industrial copper converting calcium ferrite slag. Metall Mater Trans B. 45B:864–874. doi: 10.1007/s11663-013-9987-5
17.
GardonR.1961. A review of radiant heat transfer in glass. J Am Ceram Soc. 44(7):305–312. doi: 10.1111/j.1151-2916.1961.tb15914.x
18.
GuevaraFJ, IronsGA.2011a. Simulation of slag freeze layer formation: part I. experimental study. Metall Mater Trans B. 42B:652–663. doi: 10.1007/s11663-011-9524-3
19.
GuevaraFJ, IronsGA.2011b. Simulation of slag freeze layer formation: part II: numerical model. Metall Mater Trans B. 42B:664–676. doi: 10.1007/s11663-011-9525-2
20.
HayesPC.2013. Reaction kinetics. In: SeetharamanSeshadri, McLeanAlexander, GuthrieRoderick, SridharSeetharaman, editors. Treatise on process metallurgy – volume 1 – process fundamentals. UK: Elsevier; p. 817–829.
21.
JanssonJ, TaskinenP, KaskialaM.2014. Freeze lining formation in continuous converting calcium ferrite slags. II. Can Met Q. 53(1):11–16. doi: 10.1179/1879139513Y.0000000093
22.
KallialaO, KaskialaM, SuorttiT, TaskinenP.2015. Freeze lining formation on water cooled refractory wall. Min Proc Extractive Metall. 124(4):224–232. doi: 10.1179/1743285515Y.0000000012
23.
MarxF, ShapiroM, HenningB.2010. Application of high intensity refractory cooling systems in pyrometallurgical vessel design. 12th International Ferroalloys Congress;Helsinki, Finland: SAIMM.
24.
PistoriusPC.2004. Equilibrium interactions between freeze lining and slag in ilmenite smelting. J S Afr I Min Metall. 104:417–422.
25.
RasbaneWS.1997–2015. ‘Imagej’. Bethesda (MD): U.S. National Institutes of Health.
26.
RobertsonDGC, KangS.1999. Model studies of heat transfer and flow in slag-cleaning furnaces. In: El-KaddahN, RobertsonDGC, JohansenST, Voller,VR, editors. TMS annual meeting, fluid flow phenomena in minerals processing. San Diego (CA): TMS; p. 157–168.
27.
SolheimA.2003. Coupled heat and mass transfer during melting or freezing of sideledge in aluminium cells. 12th Aluminium Symposium;Bratislava, Slovakia.
28.
SolheimA.2011. Some aspects of heat transfer between bath and sideledge in aluminium reduction cells. In: LindsaySJ, editor. Light metals. Warrendale: TMS; p. 381–386.
29.
SolheimA, ThonstadJ.1983. Heat transfer coefficients between bath and side ledge in aluminum cells model experiments. In: AdkinsEM, editor. Light Met.Warrendale: TMS; p. 425–435.
30.
SolheimA, ThonstadJ.1984. Model experiments of heat transfer coefficients between bath and side ledge in aluminum cells. J Met. 36(3):51–55.
31.
SolnordalCB, JorgensenFRA, TaylorRN.1998. Modeling the heat flow to an operating sirosmelt lance. Metall Mater Trans B. 29(2):485–492. doi: 10.1007/s11663-998-0128-5
32.
TaylorMP, WelchBJ.1987. Melt/freeze heat transfer measurements in cryolite-based electrolytes. Metall Trans B. 18B(3):391–398. doi: 10.1007/BF02656158
33.
ThonstadJ, FellnerP, HaarbergGM, HivesJ, KvandeH, StertenA.2001. Aluminium electrolysis: fundamentals of the Hall-Héroult process, 3rd ed. Düsseldorf: Aluminium-Verlag GmbH.
34.
ThonstadJ, RolsethS.1983. Equilibrium between bath and side ledge in aluminium cells basic principles. In: AdkinsEM, editor. Light Met. Warrendale: The Metallurgical Society of AIME; p. 415–424.
35.
VallesA, LenisV.1995. Prediction of ledge profile in hall-héroult cells. In: EvansJ, editor. Light Met.Warrendale: TMS; p. 309–313.
36.
VerscheureK, KylloAK, FilzwieserA, BlanpainB, WollantsP.2006. Furnace cooling technology in pyrometallurgical processes. In: Sohn international symposium. San Diego (CA): TMS; p. 139–154.
37.
WeiCC, ChenJJJ, WelchBJ, VollerVR.1997. Modelling of dynamic ledge heat transfer. In: HuglenR, editor. Light Met.Warrendale: TMS; p. 309–316.
38.
WeltyJR, WicksCE, WilsonRE, RorrerGL.2007. Fundamentals of momentum, heat, and mass transfer. USA: Wiley.
39.
ZietsmanJH.2004. Interactions between freeze lining and slag bath in ilmenite smelting [PhD thesis]. University of Pretoria.
